#include <arch/romcc_io.h>
#include <cpu/x86/lapic.h>
#include <pc80/mc146818rtc.h>
-
#include <console/console.h>
#include <usbdebug.h>
#include <cpu/amd/model_fxx_rev.h>
#include "cpu/amd/model_fxx/apic_timer.c"
#include "lib/delay.c"
#include <lib.h>
-
+#include <spd.h>
#include "cpu/x86/lapic/boot_cpu.c"
#include "northbridge/amd/amdk8/reset_test.c"
#include "superio/winbond/w83627ehg/w83627ehg_early_serial.c"
#include "superio/winbond/w83627ehg/w83627ehg_early_init.c"
-
#include "cpu/x86/bist.h"
#include "northbridge/amd/amdk8/debug.c"
#include "cpu/x86/mtrr/earlymtrr.c"
#include "northbridge/amd/amdk8/setup_resource_map.c"
+#include "southbridge/nvidia/mcp55/mcp55_early_ctrl.c"
-/* Yes, on the MSI K9N Neo (MS-7260) the Super I/O is at 0x4e! */
#define SERIAL_DEV PNP_DEV(0x4e, W83627EHG_SP1)
-#include "southbridge/nvidia/mcp55/mcp55_early_ctrl.c"
-
static void memreset(int controllers, const struct mem_controller *ctrl) {}
static inline void activate_spd_rom(const struct mem_controller *ctrl) {}
#include "northbridge/amd/amdk8/coherent_ht.c"
#include "northbridge/amd/amdk8/raminit_f.c"
#include "lib/generic_sdram.c"
-
#include "resourcemap.c"
#include "cpu/amd/dualcore/dualcore.c"
-#define MCP55_PCI_E_X_0 0
-
#define MCP55_MB_SETUP \
RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+37, 0x00, 0x44,/* GPIO38 PCI_REQ3 */ \
RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+38, 0x00, 0x44,/* GPIO39 PCI_GNT3 */ \
#include "southbridge/nvidia/mcp55/mcp55_early_setup_ss.h"
#include "southbridge/nvidia/mcp55/mcp55_early_setup_car.c"
-
#include "cpu/amd/car/post_cache_as_ram.c"
#include "cpu/amd/model_fxx/init_cpus.c"
#include "cpu/amd/model_fxx/fidvid.c"
-
#include "southbridge/nvidia/mcp55/mcp55_enable_rom.c"
#include "northbridge/amd/amdk8/early_ht.c"
{
static const uint16_t spd_addr[] = {
// Node 0
- (0xa << 3) | 0, (0xa << 3) | 2, 0, 0,
- (0xa << 3) | 1, (0xa << 3) | 3, 0, 0,
+ DIMM0, DIMM2, 0, 0,
+ DIMM1, DIMM3, 0, 0,
// Node 1
- (0xa << 3) | 4, (0xa << 3) | 6, 0, 0,
- (0xa << 3) | 5, (0xa << 3) | 7, 0, 0,
+ DIMM4, DIMM6, 0, 0,
+ DIMM5, DIMM7, 0, 0,
};
struct sys_info *sysinfo = (struct sys_info *)(CONFIG_DCACHE_RAM_BASE
+ CONFIG_DCACHE_RAM_SIZE - CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE);
-
int needs_reset = 0;
unsigned bsp_apicid = 0;
/* Nothing special needs to be done to find bus 0. */
/* Allow the HT devices to be found. */
enumerate_ht_chain();
-
sio_setup();
-
- /* Setup the MCP55. */
mcp55_enable_rom();
}
print_debug_hex32(msr.lo);
print_debug("\n");
}
-
enable_fid_change();
enable_fid_change_on_sb(sysinfo->sbbusn, sysinfo->sbdn);
init_fidvid_bsp(bsp_apicid);
-
{
msr_t msr = rdmsr(0xc0010042);
print_debug("end msr fid, vid ");
/* bsp switch stack to RAM and copy sysinfo RAM now. */
post_cache_as_ram();
}
-