Drop remainders of the removed Totalimpact board. Fix typos.

[coreboot.git] / src / mainboard / motorola / sandpointx3_altimus_mpc7410 / Options.lb

diff --git a/src/mainboard/motorola/sandpointx3_altimus_mpc7410/Options.lb b/src/mainboard/motorola/sandpointx3_altimus_mpc7410/Options.lb
index a668999a43eb3c50c44fd4c007b57d570b3395dd..a4108ad1113490a1bbdc5485fa82ac6e8e82b0bf 100644 (file)
--- a/src/mainboard/motorola/sandpointx3_altimus_mpc7410/Options.lb
+++ b/src/mainboard/motorola/sandpointx3_altimus_mpc7410/Options.lb
@@ -1,63 +1,72 @@
-uses ISA_IO_BASE
-uses ISA_MEM_BASE
-uses PCIC0_CFGADDR
-uses PCIC0_CFGDATA
-uses PNP_CFGADDR
-uses PNP_CFGDATA
-uses _IO_BASE
-
-uses CROSS_COMPILE 
-uses HAVE_OPTION_TABLE
+uses CONFIG_ARCH_X86
+uses CONFIG_ISA_IO_BASE
+uses CONFIG_CBFS
+uses CONFIG_ISA_MEM_BASE
+uses CONFIG_PCIC0_CFGADDR
+uses CONFIG_PCIC0_CFGDATA
+uses CONFIG_PNP_CFGADDR
+uses CONFIG_PNP_CFGDATA
+uses CONFIG_IO_BASE
+
+uses CONFIG_CROSS_COMPILE 
+uses CONFIG_HAVE_OPTION_TABLE
 uses CONFIG_SANDPOINT_ALTIMUS 
 uses CONFIG_COMPRESS 
-uses DEFAULT_CONSOLE_LOGLEVEL 
+uses CONFIG_DEFAULT_CONSOLE_LOGLEVEL 
 uses CONFIG_USE_INIT
 uses CONFIG_CHIP_CONFIGURE
-uses NO_POST
+uses CONFIG_NO_POST
 uses CONFIG_CONSOLE_SERIAL8250 
-uses TTYS0_BASE 
+uses CONFIG_TTYS0_BASE 
 uses CONFIG_IDE
-uses CONFIG_FS_STREAM 
+uses CONFIG_FS_PAYLOAD 
 uses CONFIG_FS_EXT2
 uses CONFIG_FS_ISO9660
 uses CONFIG_FS_FAT
-uses AUTOBOOT_CMDLINE
-uses PAYLOAD_SIZE
-uses ROM_SIZE
-uses ROM_IMAGE_SIZE
-uses _RESET
-uses _EXCEPTION_VECTORS
-uses _ROMBASE
-uses _ROMSTART
-uses _RAMBASE
-uses _RAMSTART
-uses STACK_SIZE
-uses HEAP_SIZE
-
-uses MAINBOARD
-uses MAINBOARD_VENDOR
-uses MAINBOARD_PART_NUMBER
-uses LINUXBIOS_EXTRA_VERSION
-uses CROSS_COMPILE
+uses CONFIG_COMPRESSED_PAYLOAD_LZMA
+uses CONFIG_PRECOMPRESSED_PAYLOAD
+uses CONFIG_AUTOBOOT_CMDLINE
+uses CONFIG_PAYLOAD_SIZE
+uses CONFIG_ROM_SIZE
+uses CONFIG_ROM_IMAGE_SIZE
+uses CONFIG_RESET
+uses CONFIG_EXCEPTION_VECTORS
+uses CONFIG_ROMBASE
+uses CONFIG_ROMSTART
+uses CONFIG_RAMBASE
+uses CONFIG_RAMSTART
+uses CONFIG_STACK_SIZE
+uses CONFIG_HEAP_SIZE
+
+uses CONFIG_MAINBOARD
+uses CONFIG_MAINBOARD_VENDOR
+uses CONFIG_MAINBOARD_PART_NUMBER
+uses COREBOOT_EXTRA_VERSION
+uses CONFIG_CROSS_COMPILE
 uses CC
 uses HOSTCC
-uses OBJCOPY
+uses CONFIG_OBJCOPY
 
 ##
 ## Set memory map
 ##
-default ISA_IO_BASE=0xfe000000
-default ISA_MEM_BASE=0xfd000000
-default PCIC0_CFGADDR=0xfec00000
-default PCIC0_CFGDATA=0xfee00000
-default PNP_CFGADDR=0x15c
-default PNP_CFGDATA=0x15d
-default _IO_BASE=ISA_IO_BASE
-
+default CONFIG_ISA_IO_BASE=0xfe000000
+default CONFIG_ISA_MEM_BASE=0xfd000000
+default CONFIG_PCIC0_CFGADDR=0xfec00000
+default CONFIG_PCIC0_CFGDATA=0xfee00000
+default CONFIG_PNP_CFGADDR=0x15c
+default CONFIG_PNP_CFGDATA=0x15d
+default CONFIG_IO_BASE=CONFIG_ISA_IO_BASE
 
+##
+## The default compiler
+##
+default CC="$(CONFIG_CROSS_COMPILE)gcc"
+default HOSTCC="gcc"
 ## use a cross compiler
-#default CROSS_COMPILE="powerpc-eabi-"
-#default CROSS_COMPILE="ppc_74xx-"
+#default CONFIG_CROSS_COMPILE="powerpc-eabi-"
+#default CONFIG_CROSS_COMPILE="ppc_74xx-"
+default CONFIG_ARCH_X86=0
 
 ## Use stage 1 initialization code
 default CONFIG_USE_INIT=1
@@ -69,47 +78,52 @@ default CONFIG_CHIP_CONFIGURE=1
 default CONFIG_COMPRESS=0
 
 ## Turn off POST codes
-default NO_POST=1
+default CONFIG_NO_POST=1
 
 ## Enable serial console
-default DEFAULT_CONSOLE_LOGLEVEL=8
+default CONFIG_DEFAULT_CONSOLE_LOGLEVEL=8
 default CONFIG_CONSOLE_SERIAL8250=1
-default TTYS0_BASE=0x3f8
+default CONFIG_TTYS0_BASE=0x3f8
 
 ## Load payload using filo
 default CONFIG_IDE=1
-default CONFIG_FS_STREAM=1
+default CONFIG_FS_PAYLOAD=1
 default CONFIG_FS_EXT2=1
 default CONFIG_FS_ISO9660=1
 default CONFIG_FS_FAT=1
-default AUTOBOOT_CMDLINE="hdc1:/vmlinuz"
+default CONFIG_AUTOBOOT_CMDLINE="hdc1:/vmlinuz"
 
-# LinuxBIOS must fit into 128KB
-default ROM_IMAGE_SIZE=131072
-default ROM_SIZE={ROM_IMAGE_SIZE+PAYLOAD_SIZE}
-default PAYLOAD_SIZE=262144
+# coreboot must fit into 128KB
+default CONFIG_ROM_IMAGE_SIZE=160*1024
+default CONFIG_ROM_SIZE=384*1024
+default CONFIG_PAYLOAD_SIZE=262144
 
 # Set stack and heap sizes (stage 2)
-default STACK_SIZE=0x10000
-default HEAP_SIZE=0x10000
+default CONFIG_STACK_SIZE=0x10000
+default CONFIG_HEAP_SIZE=0x10000
 
 # Sandpoint Demo Board
 ## Base of ROM
-default _ROMBASE=0xfff00000
+default CONFIG_ROMBASE=0xfff00000
 
 ## Sandpoint reset vector
-default _RESET=_ROMBASE+0x100
+default CONFIG_RESET=CONFIG_ROMBASE+0x100
 
 ## Exception vectors (other than reset vector)
-default _EXCEPTION_VECTORS=_RESET+0x100
+default CONFIG_EXCEPTION_VECTORS=CONFIG_RESET+0x100
 
-## Start of linuxBIOS in the boot rom
-## = _RESET + exeception vector table size
-default _ROMSTART=_RESET+0x3100
+## Start of coreboot in the boot rom
+## = CONFIG_RESET + exeception vector table size
+default CONFIG_ROMSTART=CONFIG_RESET+0x3100
 
-## LinuxBIOS C code runs at this location in RAM
-default _RAMBASE=0x00100000
-default _RAMSTART=0x00100000
+## Coreboot C code runs at this location in RAM
+default CONFIG_RAMBASE=0x00100000
+default CONFIG_RAMSTART=0x00100000
 
 ### End Options.lb
+#
+# CBFS
+#
+#
+default CONFIG_CBFS=1
 end