*
* Copyright (C) 2008 LiPPERT Embedded Computers GmbH
*
- * Based on mainboard.c from AMD's DB800 mainboard.
- *
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
+/* Based on mainboard.c from AMD's DB800 mainboard. */
+
#include <stdlib.h>
#include <stdint.h>
#include <console/console.h>
#include <device/pci_ids.h>
#include "chip.h"
-static const u16 ec_init_table[] = { // hi=data, lo=index
- 0x1900, // enable monitoring
- 0x0351, // TMPIN1,2 diode mode, TMPIN3 off
- 0x805C, // unlock zero adjust
- 0x7056, 0x3C57, // zero adjust TMPIN1,2
- 0x005C, // lock zero adjust
- 0xD014 // also set FAN_CTL polarity to Active High
+static const u16 ec_init_table[] = { /* hi=data, lo=index */
+ 0x1900, /* Enable monitoring */
+ 0x0351, /* TMPIN1,2 diode mode, TMPIN3 off */
+ 0x805C, /* Unlock zero adjust */
+ 0x7056, 0x3C57, /* Zero adjust TMPIN1,2 */
+ 0x005C, /* Lock zero adjust */
+ 0xD014 /* Also set FAN_CTL polarity to Active High */
};
static void init(struct device *dev)
{
- struct mainboard_lippert_roadrunner_lx_config *mb = dev->chip_info;
+ struct mainboard_config *mb = dev->chip_info;
unsigned int gpio_base, i;
- printk_debug("LiPPERT RoadRunner-LX ENTER %s\n", __FUNCTION__);
+ printk(BIOS_DEBUG, "LiPPERT RoadRunner-LX ENTER %s\n", __func__);
+
+ /* Init CS5536 GPIOs. */
+ gpio_base = pci_read_config32(dev_find_device(PCI_VENDOR_ID_AMD,
+ PCI_DEVICE_ID_AMD_CS5536_ISA, 0), PCI_BASE_ADDRESS_1) - 1;
- /* Init CS5536 GPIOs */
- gpio_base = pci_read_config32(dev_find_device(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_CS5536_ISA, 0),
- PCI_BASE_ADDRESS_1) - 1;
- outl(0x00000040, gpio_base + 0x00); // GPIO6 value 1 - LAN_PD#
- outl(0x00000040, gpio_base + 0x04); // GPIO6 output 1 - LAN_PD#
- outl(0x00000400, gpio_base + 0x34); // GPIO10 in aux1 1 - THRM_ALRM#
- outl(0x00000400, gpio_base + 0x20); // GPIO10 input 1 - THRM_ALRM#
- outl(0x08000000, gpio_base + 0x98); // GPIO27 pull up 0 - PM-LED
+ outl(0x00000040, gpio_base + 0x00); // GPIO6 value 1 - LAN_PD#
+ outl(0x00000040, gpio_base + 0x04); // GPIO6 output 1 - LAN_PD#
+ outl(0x00000400, gpio_base + 0x34); // GPIO10 in aux1 1 - THRM_ALRM#
+ outl(0x00000400, gpio_base + 0x20); // GPIO10 input 1 - THRM_ALRM#
+ outl(0x08000000, gpio_base + 0x98); // GPIO27 pull up 0 - PM-LED
- /* Init Environment Controller */
- for (i=0; i<ARRAY_SIZE(ec_init_table); i++) {
+ /* Init Environment Controller. */
+ for (i = 0; i < ARRAY_SIZE(ec_init_table); i++) {
u16 val = ec_init_table[i];
- outb((u8)val, 0x0295); outb(val>>8, 0x0296);
+ outb((u8)val, 0x0295);
+ outb(val >> 8, 0x0296);
}
- outb(mb->sio_gp1x_config, 0x1220); // Simple-I/O GP17-10
- printk_debug("LiPPERT RoadRunner-LX EXIT %s\n", __FUNCTION__);
+ outb(mb->sio_gp1x_config, 0x1220); /* Simple-I/O GP17-10 */
+ printk(BIOS_DEBUG, "LiPPERT RoadRunner-LX EXIT %s\n", __func__);
}
static void enable_dev(struct device *dev)
dev->ops->init = init;
}
-struct chip_operations mainboard_lippert_roadrunner_lx_ops = {
+struct chip_operations mainboard_ops = {
CHIP_NAME("LiPPERT RoadRunner-LX Mainboard")
.enable_dev = enable_dev,
};