#define SYSTEM_TYPE 1 /* DESKTOP */
//#define SYSTEM_TYPE 2 /* MOBILE */
-#define SET_NB_CFG_54 1
-
//used by incoherent_ht
#define FAM10_SCAN_PCI_BUS 0
#define FAM10_ALLOCATE_IO_RANGE 0
-//used by init_cpus and fidvid
-#define SET_FIDVID 1
-#define SET_FIDVID_CORE_RANGE 0
-
#include <stdint.h>
#include <string.h>
#include <device/pci_def.h>
#include "northbridge/amd/amdfam10/raminit.h"
#include "northbridge/amd/amdfam10/amdfam10.h"
#include <lib.h>
-
#include "cpu/x86/lapic/boot_cpu.c"
#include "northbridge/amd/amdfam10/reset_test.c"
-
#include <console/loglevel.h>
#include "cpu/x86/bist.h"
-
static int smbus_read_byte(u32 device, u32 address);
-
#include "superio/fintek/f71863fg/f71863fg_early_serial.c"
-#if CONFIG_TTYS0_BASE == 0x2f8
-#define SERIAL_DEV PNP_DEV(0x2e, F71863FG_SP2)
-#else
-#define SERIAL_DEV PNP_DEV(0x2e, F71863FG_SP1)
-#endif
-
#include <usbdebug.h>
-
#include "cpu/x86/mtrr/earlymtrr.c"
#include <cpu/amd/mtrr.h>
#include "northbridge/amd/amdfam10/setup_resource_map.c"
-
#include "southbridge/amd/rs780/rs780_early_setup.c"
#include "southbridge/amd/sb700/sb700_early_setup.c"
#include "northbridge/amd/amdfam10/debug.c"
+#if CONFIG_TTYS0_BASE == 0x2f8
+#define SERIAL_DEV PNP_DEV(0x2e, F71863FG_SP2)
+#else
+#define SERIAL_DEV PNP_DEV(0x2e, F71863FG_SP1)
+#endif
+
static void activate_spd_rom(const struct mem_controller *ctrl)
{
}
static int spd_read_byte(u32 device, u32 address)
{
- int result;
- result = smbus_read_byte(device, address);
- return result;
+ return smbus_read_byte(device, address);
}
#include "northbridge/amd/amdfam10/amdfam10.h"
-
-
#include "northbridge/amd/amdfam10/raminit_sysinfo_in_ram.c"
#include "northbridge/amd/amdfam10/amdfam10_pci.c"
-
#include "resourcemap.c"
#include "cpu/amd/quadcore/quadcore.c"
-
#include "cpu/amd/car/post_cache_as_ram.c"
#include "cpu/amd/microcode/microcode.c"
#include "cpu/amd/model_10xxx/update_microcode.c"
#include "cpu/amd/model_10xxx/init_cpus.c"
-
#include "northbridge/amd/amdfam10/early_ht.c"
#include "southbridge/amd/sb700/sb700_early_setup.c"
-
-
-
-#define RC00 0
-#define RC01 1
-
-#define DIMM0 0x50
-#define DIMM1 0x51
-#define DIMM2 0x52
-#define DIMM3 0x53
+#include <spd.h>
void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
{
-
struct sys_info *sysinfo = (struct sys_info *)(CONFIG_DCACHE_RAM_BASE + CONFIG_DCACHE_RAM_SIZE - CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE);
static const u8 spd_addr[] = {RC00, DIMM0, DIMM2, 0, 0, DIMM1, DIMM3, 0, 0, };
u32 bsp_apicid = 0;
rs780_early_setup();
sb700_early_setup();
- #if SET_FIDVID == 1
+ #if CONFIG_SET_FIDVID
msr = rdmsr(0xc0010071);
printk(BIOS_DEBUG, "\nBegin FIDVID MSR 0xc0010071 0x%08x 0x%08x \n", msr.hi, msr.lo);
post_cache_as_ram(); // BSP switch stack to ram, copy then execute LB.
post_code(0x43); // Should never see this post code.
}
-