-#define RAMINIT_SYSINFO 1
-#define CACHE_AS_RAM_ADDRESS_DEBUG 0
-
-#define SET_NB_CFG_54 1
-
-//used by raminit
-#define QRANK_DIMM_SUPPORT 1
+#define SET_NB_CFG_54 1
//used by incoherent_ht
//#define K8_ALLOCATE_IO_RANGE 1
#include <device/pnp_def.h>
#include <arch/romcc_io.h>
#include <cpu/x86/lapic.h>
-#include "option_table.h"
-#include "pc80/mc146818rtc_early.c"
+#include <pc80/mc146818rtc.h>
-#include "pc80/serial.c"
-#include "console/console.c"
+#include <console/console.h>
#include <cpu/amd/model_fxx_rev.h>
#include "southbridge/amd/amd8111/amd8111_early_smbus.c"
#include "northbridge/amd/amdk8/raminit.h"
#include "lib/delay.c"
#include "northbridge/amd/amdk8/debug.c"
-#include "cpu/amd/mtrr/amd_earlymtrr.c"
+#include "cpu/x86/mtrr/earlymtrr.c"
#include "superio/winbond/w83627hf/w83627hf_early_serial.c"
#include "northbridge/amd/amdk8/setup_resource_map.c"
}
#include "northbridge/amd/amdk8/amdk8.h"
-#include "northbridge/amd/amdk8/coherent_ht.c"
-
#include "northbridge/amd/amdk8/incoherent_ht.c"
-
+#include "northbridge/amd/amdk8/coherent_ht.c"
#include "northbridge/amd/amdk8/raminit.c"
-
#include "lib/generic_sdram.c"
-#include "lib/ramtest.c"
/* tyan does not want the default */
#include "northbridge/amd/amdk8/resourcemap.c"
#define DIMM6 0x56
#define DIMM7 0x57
-
#include "cpu/amd/car/post_cache_as_ram.c"
#include "cpu/amd/model_fxx/init_cpus.c"
void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
{
static const uint16_t spd_addr[] = {
- //first node
+ // first node
DIMM0, DIMM2, 0, 0,
DIMM1, DIMM3, 0, 0,
-#if CONFIG_MAX_PHYSICAL_CPUS > 1
- //second node
+
+ // second node
DIMM4, DIMM6, 0, 0,
DIMM5, DIMM7, 0, 0,
-#endif
-
};
- struct sys_info *sysinfo = (CONFIG_DCACHE_RAM_BASE + CONFIG_DCACHE_RAM_SIZE - CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE);
+ struct sys_info *sysinfo = (struct sys_info *)(CONFIG_DCACHE_RAM_BASE
+ + CONFIG_DCACHE_RAM_SIZE - CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE);
- int needs_reset; int i;
+ int needs_reset;
unsigned bsp_apicid = 0;
if (!cpu_init_detectedx && boot_cpu()) {
print_debug("bsp_apicid="); print_debug_hex8(bsp_apicid); print_debug("\n");
#if CONFIG_MEM_TRAIN_SEQ == 1
- set_sysinfo_in_ram(0); // in BSP so could hold all ap until sysinfo is in ram
+ set_sysinfo_in_ram(0); // in BSP so could hold all ap until sysinfo is in ram
#endif
setup_coherent_ht_domain(); // routing table and start other core0
wait_all_core0_started();
#if CONFIG_LOGICAL_CPUS==1
// It is said that we should start core1 after all core0 launched
- /* becase optimize_link_coherent_ht is moved out from setup_coherent_ht_domain,
+ /* becase optimize_link_coherent_ht is moved out from setup_coherent_ht_domain,
* So here need to make sure last core0 is started, esp for two way system,
- * (there may be apic id conflicts in that case)
+ * (there may be apic id conflicts in that case)
*/
start_other_cores();
wait_all_other_cores_started(bsp_apicid);
#endif
-
+
/* it will set up chains and store link pair for optimization later */
ht_setup_chains_x(sysinfo); // it will init sblnk and sbbusn, nodes, sbdn
{
msr_t msr;
msr=rdmsr(0xc0010042);
- print_debug("end msr fid, vid "); print_debug_hex32( msr.hi ); print_debug_hex32(msr.lo); print_debug("\n");
+ print_debug("end msr fid, vid "); print_debug_hex32( msr.hi ); print_debug_hex32(msr.lo); print_debug("\n");
}
#endif