-#define ASSEMBLY 1
-#define __PRE_RAM__
-
-#define RAMINIT_SYSINFO 1
-#define CACHE_AS_RAM_ADDRESS_DEBUG 0
-
-#define SET_NB_CFG_54 1
-
-//used by raminit
-#define QRANK_DIMM_SUPPORT 1
-
-//used by incoherent_ht
-//#define K8_ALLOCATE_IO_RANGE 1
-
-//used by init_cpus and fidvid
-#define K8_SET_FIDVID 0
-//if we want to wait for core1 done before DQS training, set it to 0
-#define K8_SET_FIDVID_CORE0_ONLY 1
-
#if CONFIG_K8_REV_F_SUPPORT == 1
#define K8_REV_F_SUPPORT_F0_F1_WORKAROUND 0
#endif
#include <device/pnp_def.h>
#include <arch/romcc_io.h>
#include <cpu/x86/lapic.h>
-#include "option_table.h"
-#include "pc80/mc146818rtc_early.c"
-
-#if CONFIG_USE_FAILOVER_IMAGE==0
-#include "pc80/serial.c"
-#include "arch/i386/lib/console.c"
+#include <pc80/mc146818rtc.h>
+#include <console/console.h>
#include <cpu/amd/model_fxx_rev.h>
#include "southbridge/amd/amd8111/amd8111_early_smbus.c"
#include "northbridge/amd/amdk8/raminit.h"
#include "cpu/amd/model_fxx/apic_timer.c"
-#endif
-
-
-
#include "cpu/x86/lapic/boot_cpu.c"
#include "northbridge/amd/amdk8/reset_test.c"
-
-#if CONFIG_USE_FAILOVER_IMAGE==0
#include "cpu/x86/bist.h"
-
#include "lib/delay.c"
-
#include "northbridge/amd/amdk8/debug.c"
-#include "cpu/amd/mtrr/amd_earlymtrr.c"
+#include "cpu/x86/mtrr/earlymtrr.c"
#include "superio/winbond/w83627hf/w83627hf_early_serial.c"
-
#include "northbridge/amd/amdk8/setup_resource_map.c"
+#include "southbridge/amd/amd8111/amd8111_early_ctrl.c"
#define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1)
-#include "southbridge/amd/amd8111/amd8111_early_ctrl.c"
-
/*
* GPIO28 of 8111 will control H0_MEMRESET_L
* GPIO29 of 8111 will control H1_MEMRESET_L
}
#include "northbridge/amd/amdk8/amdk8.h"
-#include "northbridge/amd/amdk8/coherent_ht.c"
-
#include "northbridge/amd/amdk8/incoherent_ht.c"
-
+#include "northbridge/amd/amdk8/coherent_ht.c"
#include "northbridge/amd/amdk8/raminit.c"
-
#include "lib/generic_sdram.c"
-#include "lib/ramtest.c"
-
- /* tyan does not want the default */
-#include "northbridge/amd/amdk8/resourcemap.c"
-
+#include "northbridge/amd/amdk8/resourcemap.c" /* tyan does not want the default */
#include "cpu/amd/dualcore/dualcore.c"
-
-#define DIMM0 0x50
-#define DIMM1 0x51
-#define DIMM2 0x52
-#define DIMM3 0x53
-#define DIMM4 0x54
-#define DIMM5 0x55
-#define DIMM6 0x56
-#define DIMM7 0x57
-
-
-#include "cpu/amd/car/copy_and_run.c"
+#include <spd.h>
#include "cpu/amd/car/post_cache_as_ram.c"
-
#include "cpu/amd/model_fxx/init_cpus.c"
-
#include "cpu/amd/model_fxx/fidvid.c"
-#endif
-
#include "southbridge/amd/amd8111/amd8111_enable_rom.c"
#include "northbridge/amd/amdk8/early_ht.c"
-#if CONFIG_USE_FAILOVER_IMAGE==0
-
void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
{
static const uint16_t spd_addr[] = {
- //first node
+ // first node
DIMM0, DIMM2, 0, 0,
DIMM1, DIMM3, 0, 0,
-#if CONFIG_MAX_PHYSICAL_CPUS > 1
- //second node
+
+ // second node
DIMM4, DIMM6, 0, 0,
DIMM5, DIMM7, 0, 0,
-#endif
-
};
- struct sys_info *sysinfo = (CONFIG_DCACHE_RAM_BASE + CONFIG_DCACHE_RAM_SIZE - CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE);
+ struct sys_info *sysinfo = (struct sys_info *)(CONFIG_DCACHE_RAM_BASE
+ + CONFIG_DCACHE_RAM_SIZE - CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE);
- int needs_reset; int i;
+ int needs_reset;
unsigned bsp_apicid = 0;
if (!cpu_init_detectedx && boot_cpu()) {
/* Halt if there was a built in self test failure */
report_bist_failure(bist);
- print_debug("*sysinfo range: ["); print_debug_hex32(sysinfo); print_debug(","); print_debug_hex32((unsigned long)sysinfo+sizeof(struct sys_info)); print_debug(")\r\n");
+ printk(BIOS_DEBUG, "*sysinfo range: [%p,%p]\n",sysinfo,sysinfo+1);
setup_default_resource_map();
- print_debug("bsp_apicid="); print_debug_hex8(bsp_apicid); print_debug("\r\n");
+ print_debug("bsp_apicid="); print_debug_hex8(bsp_apicid); print_debug("\n");
#if CONFIG_MEM_TRAIN_SEQ == 1
- set_sysinfo_in_ram(0); // in BSP so could hold all ap until sysinfo is in ram
+ set_sysinfo_in_ram(0); // in BSP so could hold all ap until sysinfo is in ram
#endif
setup_coherent_ht_domain(); // routing table and start other core0
wait_all_core0_started();
#if CONFIG_LOGICAL_CPUS==1
// It is said that we should start core1 after all core0 launched
- /* becase optimize_link_coherent_ht is moved out from setup_coherent_ht_domain,
+ /* becase optimize_link_coherent_ht is moved out from setup_coherent_ht_domain,
* So here need to make sure last core0 is started, esp for two way system,
- * (there may be apic id conflicts in that case)
+ * (there may be apic id conflicts in that case)
*/
start_other_cores();
wait_all_other_cores_started(bsp_apicid);
#endif
-
+
/* it will set up chains and store link pair for optimization later */
ht_setup_chains_x(sysinfo); // it will init sblnk and sbbusn, nodes, sbdn
-
-#if K8_SET_FIDVID == 1
+#if CONFIG_SET_FIDVID
{
msr_t msr;
msr=rdmsr(0xc0010042);
- print_debug("begin msr fid, vid "); print_debug_hex32( msr.hi ); print_debug_hex32(msr.lo); print_debug("\r\n");
+ print_debug("begin msr fid, vid "); print_debug_hex32( msr.hi ); print_debug_hex32(msr.lo); print_debug("\n");
}
{
msr_t msr;
msr=rdmsr(0xc0010042);
- print_debug("end msr fid, vid "); print_debug_hex32( msr.hi ); print_debug_hex32(msr.lo); print_debug("\r\n");
+ print_debug("end msr fid, vid "); print_debug_hex32( msr.hi ); print_debug_hex32(msr.lo); print_debug("\n");
}
#endif
// fidvid change will issue one LDTSTOP and the HT change will be effective too
if (needs_reset) {
- print_info("ht reset -\r\n");
+ print_info("ht reset -\n");
soft_reset_x(sysinfo->sbbusn, sysinfo->sbdn);
}
init_timer(); // Need to use TMICT to synconize FID/VID
sdram_initialize(sysinfo->nodes, sysinfo->ctrl, sysinfo);
-
#if 0
dump_pci_devices();
#endif
post_cache_as_ram(); // bsp swtich stack to ram and copy sysinfo ram now
-
}
-#endif
projects / coreboot.git / blobdiff