* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- *
*/
#include <stdint.h>
#include <device/pnp_def.h>
#include <arch/romcc_io.h>
#include <cpu/x86/lapic.h>
-#include "pc80/mc146818rtc_early.c"
-#include "pc80/serial.c"
+#include <pc80/mc146818rtc.h>
#include "pc80/udelay_io.c"
-#include "console/console.c"
+#include <console/console.h>
#include "lib/ramtest.c"
#include "southbridge/intel/i3100/i3100_early_smbus.c"
#include "southbridge/intel/i3100/i3100_early_lpc.c"
#include "cpu/x86/mtrr/earlymtrr.c"
#include "superio/intel/i3100/i3100_early_serial.c"
#include "cpu/x86/bist.h"
-#include "spd.h"
-
-#define SIO_GPIO_BASE 0x680
-#define SIO_XBUS_BASE 0x4880
+#include <spd.h>
#define DEVPRES_CONFIG (DEVPRES_D1F0 | DEVPRES_D2F0 | DEVPRES_D3F0 | DEVPRES_D4F0)
-static inline void activate_spd_rom(const struct mem_controller *ctrl)
-{
- /* nothing to do */
-}
static inline int spd_read_byte(u16 device, u8 address)
{
return smbus_read_byte(device, address);
#include "../../intel/jarrell/debug.c"
#include "arch/i386/lib/stages.c"
-/* #define TRUXTON_DEBUG */
+#define SERIAL_DEV PNP_DEV(0x4e, I3100_SP1)
static void main(unsigned long bist)
{
{
.node_id = 0,
.f0 = PCI_DEV(0, 0x00, 0),
- .channel0 = { (0xa<<3)|2, (0xa<<3)|3 },
+ .channel0 = { DIMM2, DIMM3 },
}
};
/* Set up the console */
i3100_enable_superio();
- i3100_enable_serial(I3100_SUPERIO_CONFIG_PORT, I3100_SP1, CONFIG_TTYS0_BASE);
+ i3100_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE);
+ i3100_configure_uart_clk(SERIAL_DEV, I3100_UART_CLK_PREDIVIDE_26);
+
uart_init();
console_init();
ram_verify(0x00000000, 0x02000000);
#endif
}
-