#include <console/console.h>
#include <cpu/x86/bist.h>
+#include <cpu/intel/acpi.h>
-#include "lib/ramtest.c"
#include "southbridge/intel/i3100/i3100_early_smbus.c"
#include "southbridge/intel/i3100/i3100_early_lpc.c"
#include "reset.c"
#include "superio/intel/i3100/i3100_early_serial.c"
#include "superio/smsc/smscsuperio/smscsuperio_early_serial.c"
-
-/* Data */
-#define UART_RBR 0x00
-#define UART_TBR 0x00
-
-/* Control */
-#define UART_IER 0x01
-#define UART_IIR 0x02
-#define UART_FCR 0x02
-#define UART_LCR 0x03
-#define UART_MCR 0x04
-#define UART_DLL 0x00
-#define UART_DLM 0x01
-
-/* Status */
-#define UART_LSR 0x05
-#define UART_MSR 0x06
-#define UART_SCR 0x07
-
-#define SIO_GPIO_BASE 0x680
-#define SIO_XBUS_BASE 0x4880
+#include "northbridge/intel/i3100/i3100.h"
+#include "southbridge/intel/i3100/i3100.h"
#define DEVPRES_CONFIG (DEVPRES_D1F0 | DEVPRES_D2F0 | DEVPRES_D3F0)
#define DEVPRES1_CONFIG (DEVPRES1_D0F1 | DEVPRES1_D8F0)
-#define IA32_PERF_STS 0x198
-#define IA32_PERF_CTL 0x199
-#define MSR_THERM2_CTL 0x19D
-#define IA32_MISC_ENABLES 0x1A0
-
-/* SATA */
-#define SATA_MAP 0x90
-
-#define SATA_MODE_IDE 0x00
-#define SATA_MODE_AHCI 0x01
-
-/* RCBA registers */
-#define RCBA 0xF0
-#define DEFAULT_RCBA 0xFEA00000
-
#define RCBA_RPC 0x0224 /* 32 bit */
#define RCBA_TCTL 0x3000 /* 8 bit */
#include "lib/generic_sdram.c"
#include "northbridge/intel/i3100/reset_test.c"
#include "debug.c"
+#include <spd.h>
+
+#define SERIAL_DEV PNP_DEV(0x4e, I3100_SP1)
static void early_config(void)
{
.f1 = PCI_DEV(0, 0x00, 1),
.f2 = PCI_DEV(0, 0x00, 2),
.f3 = PCI_DEV(0, 0x00, 3),
- .channel0 = { (0xa<<3)|3, (0xa<<3)|2, (0xa<<3)|1, (0xa<<3)|0 },
- .channel1 = { (0xa<<3)|7, (0xa<<3)|6, (0xa<<3)|5, (0xa<<3)|4 },
+ .channel0 = { DIMM3, DIMM2, DIMM1, DIMM0 },
+ .channel1 = { DIMM7, DIMM6, DIMM5, DIMM4 },
}
};
/* Setup the console */
i3100_enable_superio();
- i3100_enable_serial(0x4E, I3100_SP1, CONFIG_TTYS0_BASE);
+ i3100_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE);
+ i3100_configure_uart_clk(SERIAL_DEV, I3100_UART_CLK_PREDIVIDE_26);
+
uart_init();
console_init();