#include <device/pnp_def.h>
#include <arch/hlt.h>
#include <console/console.h>
-#include "lib/ramtest.c"
#include "cpu/x86/bist.h"
#include "cpu/x86/msr.h"
#include <cpu/amd/lxdef.h>
#include <cpu/amd/geode_post_code.h>
#include "southbridge/amd/cs5536/cs5536.h"
-
-#define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1)
-
+#include <spd.h>
#include "southbridge/amd/cs5536/cs5536_early_smbus.c"
#include "southbridge/amd/cs5536/cs5536_early_setup.c"
#include "superio/winbond/w83627hf/w83627hf_early_serial.c"
+#define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1)
+
static inline int spd_read_byte(unsigned int device, unsigned int address)
{
return smbus_read_byte(device, address);
/* Hold Count - how long we will sit in reset */
#define PLLMSRlo 0x00DE6000
-#define DIMM0 0xA0
-#define DIMM1 0xA2
-
#include "northbridge/amd/lx/raminit.h"
#include "northbridge/amd/lx/pll_reset.c"
#include "northbridge/amd/lx/raminit.c"
#include "cpu/amd/model_lx/syspreinit.c"
#include "cpu/amd/model_lx/msrinit.c"
-static void mb_gpio_init(void)
-{
- /* Early mainboard specific GPIO setup. */
-}
-
void main(unsigned long bist)
{
post_code(0x01);
static const struct mem_controller memctrl[] = {
- {.channel0 = {(0xa << 3) | 0, (0xa << 3) | 1}}
+ {.channel0 = {DIMM0, DIMM1}}
};
SystemPreInit();
* early MSR setup for CS5536.
*/
w83627hf_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE);
- mb_gpio_init();
uart_init();
console_init();
/* Memory is setup. Return to cache_as_ram.inc and continue to boot. */
return;
}
-