Convert boards to use mptable_write_buses.

[coreboot.git] / src / mainboard / iei / kino-780am2-fam10 / romstage.c

diff --git a/src/mainboard/iei/kino-780am2-fam10/romstage.c b/src/mainboard/iei/kino-780am2-fam10/romstage.c
index d9790b37cd33298dc65194d087ec209c72d35e81..de213534f87bae6e3079b3c0d4a5cf926e7b4cb5 100644 (file)
--- a/src/mainboard/iei/kino-780am2-fam10/romstage.c
+++ b/src/mainboard/iei/kino-780am2-fam10/romstage.c
@@ -21,21 +21,10 @@
 #define SYSTEM_TYPE 1  /* DESKTOP */
 //#define SYSTEM_TYPE 2        /* MOBILE */
 
-#define RAMINIT_SYSINFO 1
-
-#define SET_NB_CFG_54 1
-
-//used by raminit
-#define QRANK_DIMM_SUPPORT 1
-
 //used by incoherent_ht
 #define FAM10_SCAN_PCI_BUS 0
 #define FAM10_ALLOCATE_IO_RANGE 0
 
-//used by init_cpus and fidvid
-#define SET_FIDVID 1
-#define SET_FIDVID_CORE_RANGE 0
-
 /* UART address and device number */
 #define SERIAL_DEV PNP_DEV(0x2e, F71859_SP1)
 
@@ -62,11 +51,7 @@
 static int smbus_read_byte(u32 device, u32 address);
 
 #include "superio/fintek/f71859/f71859_early_serial.c"
-
-#if CONFIG_USBDEBUG
-#include "southbridge/amd/sb700/sb700_enable_usbdebug.c"
-#include "pc80/usbdebug_serial.c"
-#endif
+#include <usbdebug.h>
 
 #include "cpu/x86/mtrr/earlymtrr.c"
 #include <cpu/amd/mtrr.h>
@@ -102,16 +87,7 @@ static int spd_read_byte(u32 device, u32 address)
 
 #include "northbridge/amd/amdfam10/early_ht.c"
 #include "southbridge/amd/sb700/sb700_early_setup.c"
-
-//#include "spd_addr.h"
-
-#define RC00  0
-#define RC01  1
-
-#define DIMM0 0x50
-#define DIMM1 0x51
-#define DIMM2 0x52
-#define DIMM3 0x53
+#include <spd.h>
 
 void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
 {
@@ -208,7 +184,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
        rs780_early_setup();
        sb700_early_setup();
 
- #if SET_FIDVID == 1
+ #if CONFIG_SET_FIDVID
        msr = rdmsr(0xc0010071);
        printk(BIOS_DEBUG, "\nBegin FIDVID MSR 0xc0010071 0x%08x 0x%08x \n", msr.hi, msr.lo);