* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
-#define RAMINIT_SYSINFO 1
-
-#define K8_ALLOCATE_IO_RANGE 1
-
-#define QRANK_DIMM_SUPPORT 1
-
-#if CONFIG_LOGICAL_CPUS==1
-#define SET_NB_CFG_54 1
-#endif
-
-//used by init_cpus and fidvid
-#define SET_FIDVID 1
-//if we want to wait for core1 done before DQS training, set it to 0
-#define SET_FIDVID_CORE0_ONLY 1
-
#if CONFIG_K8_REV_F_SUPPORT == 1
#define K8_REV_F_SUPPORT_F0_F1_WORKAROUND 0
#endif
-#define DBGP_DEFAULT 7
-
#include <stdint.h>
#include <string.h>
#include <device/pci_def.h>
#include <device/pnp_def.h>
#include <arch/romcc_io.h>
#include <cpu/x86/lapic.h>
-#include "option_table.h"
-#include "pc80/mc146818rtc_early.c"
-
-#include "pc80/serial.c"
-#include "console/console.c"
-#if CONFIG_USBDEBUG_DIRECT
-#include "southbridge/nvidia/mcp55/mcp55_enable_usbdebug_direct.c"
-#include "pc80/usbdebug_direct_serial.c"
-#endif
-#include "lib/ramtest.c"
+#include <pc80/mc146818rtc.h>
+
+#include <console/console.h>
+#include <usbdebug.h>
+#include <spd.h>
#include <cpu/amd/model_fxx_rev.h>
return smbus_read_byte(device, address);
}
-#define MCP55_NUM 1
-#define MCP55_USE_NIC 1
-#define MCP55_USE_AZA 1
-
#define MCP55_PCI_E_X_0 0
#define MCP55_MB_SETUP \
#include "northbridge/amd/amdk8/raminit_f.c"
#include "lib/generic_sdram.c"
-#include "resourcemap.c"
+#include "resourcemap.c"
#include "cpu/amd/dualcore/dualcore.c"
uint8_t byte;
byte = pci_read_config8(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0x7b);
- byte |= 0x20;
+ byte |= 0x20;
pci_write_config8(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0x7b, byte);
-
+
dword = pci_read_config32(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0xa0);
dword |= (1<<0);
pci_write_config32(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0xa0, dword);
-
+
dword = pci_read_config32(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0xa4);
dword |= (1<<16);
pci_write_config32(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0xa4, dword);
{
static const uint16_t spd_addr [] = {
// Node 0
- (0xa<<3)|0, (0xa<<3)|2, 0, 0,
- (0xa<<3)|1, (0xa<<3)|3, 0, 0,
+ DIMM0, DIMM2, 0, 0,
+ DIMM1, DIMM3, 0, 0,
// Node 1
- (0xa<<3)|4, (0xa<<3)|6, 0, 0,
- (0xa<<3)|5, (0xa<<3)|7, 0, 0,
+ DIMM4, DIMM6, 0, 0,
+ DIMM5, DIMM7, 0, 0,
};
- struct sys_info *sysinfo = (struct sys_info *)(CONFIG_DCACHE_RAM_BASE
+ struct sys_info *sysinfo = (struct sys_info *)(CONFIG_DCACHE_RAM_BASE
+ CONFIG_DCACHE_RAM_SIZE - CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE);
int needs_reset = 0;
setup_mb_resource_map();
uart_init();
-
+
/* Halt if there was a built in self test failure */
report_bist_failure(bist);
-#if CONFIG_USBDEBUG_DIRECT
- mcp55_enable_usbdebug_direct(DBGP_DEFAULT);
- early_usbdebug_direct_init();
+#if CONFIG_USBDEBUG
+ mcp55_enable_usbdebug(CONFIG_USBDEBUG_DEFAULT_PORT);
+ early_usbdebug_init();
#endif
console_init();
printk(BIOS_DEBUG, "*sysinfo range: [%p,%p]\n",sysinfo,sysinfo+1);
/* it will set up chains and store link pair for optimization later */
ht_setup_chains_x(sysinfo); // it will init sblnk and sbbusn, nodes, sbdn
-#if SET_FIDVID == 1
+#if CONFIG_SET_FIDVID
{
msr_t msr;
//It's the time to set ctrl in sysinfo now;
fill_mem_ctrl(sysinfo->nodes, sysinfo->ctrl, spd_addr);
- enable_smbus();
+ enable_smbus();
/* all ap stopped? */