-#define ASSEMBLY 1
-#define __PRE_RAM__
-
-#define QRANK_DIMM_SUPPORT 1
-
-#if CONFIG_LOGICAL_CPUS==1
-#define SET_NB_CFG_54 1
-#endif
-
#include <stdint.h>
#include <string.h>
#include <device/pci_def.h>
#include <device/pnp_def.h>
#include <arch/romcc_io.h>
#include <cpu/x86/lapic.h>
-#include "option_table.h"
-#include "pc80/mc146818rtc_early.c"
-#include "pc80/serial.c"
-#include "arch/i386/lib/console.c"
-#include "lib/ramtest.c"
-
-#if 0
-static void post_code(uint8_t value) {
-#if 0
- int i;
- for(i=0;i<0x80000;i++) {
- outb(value, 0x80);
- }
-#endif
-}
-#endif
-
+#include <pc80/mc146818rtc.h>
+#include <console/console.h>
#include <cpu/amd/model_fxx_rev.h>
#include "northbridge/amd/amdk8/incoherent_ht.c"
#include "southbridge/broadcom/bcm5785/bcm5785_early_smbus.c"
#include "northbridge/amd/amdk8/raminit.h"
#include "cpu/amd/model_fxx/apic_timer.c"
#include "lib/delay.c"
-
#include "cpu/x86/lapic/boot_cpu.c"
#include "northbridge/amd/amdk8/reset_test.c"
#include "northbridge/amd/amdk8/debug.c"
#include "superio/nsc/pc87417/pc87417_early_serial.c"
-
-#include "cpu/amd/mtrr/amd_earlymtrr.c"
+#include "cpu/x86/mtrr/earlymtrr.c"
#include "cpu/x86/bist.h"
-
#include "northbridge/amd/amdk8/setup_resource_map.c"
+#include "southbridge/broadcom/bcm5785/bcm5785_early_setup.c"
#define SERIAL_DEV PNP_DEV(0x2e, PC87417_SP1)
#define RTC_DEV PNP_DEV(0x2e, PC87417_RTC)
-#include "southbridge/broadcom/bcm5785/bcm5785_early_setup.c"
-
-static void memreset_setup(void)
-{
-}
-
-static void memreset(int controllers, const struct mem_controller *ctrl)
-{
-}
+static void memreset_setup(void) { }
+static void memreset(int controllers, const struct mem_controller *ctrl) { }
static inline void activate_spd_rom(const struct mem_controller *ctrl)
{
#define SMBUS_HUB 0x71
- int ret,i;
unsigned device=(ctrl->channel0[0])>>8;
smbus_send_byte(SMBUS_HUB, device);
}
+
#if 0
static inline void change_i2c_mux(unsigned device)
{
#define SMBUS_HUB 0x71
int ret;
- print_debug("change_i2c_mux i="); print_debug_hex8(device); print_debug("\r\n");
+ print_debug("change_i2c_mux i="); print_debug_hex8(device); print_debug("\n");
ret = smbus_send_byte(SMBUS_HUB, device);
- print_debug("change_i2c_mux ret="); print_debug_hex32(ret); print_debug("\r\n");
+ print_debug("change_i2c_mux ret="); print_debug_hex32(ret); print_debug("\n");
}
#endif
#include "northbridge/amd/amdk8/raminit.c"
#include "northbridge/amd/amdk8/coherent_ht.c"
#include "lib/generic_sdram.c"
-
- /* tyan does not want the default */
-#include "resourcemap.c"
-
+#include "resourcemap.c"
#include "cpu/amd/dualcore/dualcore.c"
-
-#define RC0 (6<<8)
-#define RC1 (7<<8)
-
-#define DIMM0 0x50
-#define DIMM1 0x51
-#define DIMM2 0x52
-#define DIMM3 0x53
-
-#include "cpu/amd/car/copy_and_run.c"
+#include <spd.h>
#include "cpu/amd/car/post_cache_as_ram.c"
-
#include "cpu/amd/model_fxx/init_cpus.c"
-
-
-#if CONFIG_USE_FALLBACK_IMAGE == 1
-
#include "northbridge/amd/amdk8/early_ht.c"
-void failover_process(unsigned long bist, unsigned long cpu_init_detectedx)
-{
-
-
- /* Is this a cpu only reset? Is this a secondary cpu? */
- if ((cpu_init_detectedx) || (!boot_cpu())) {
- if (last_boot_normal()) { // RTC already inited
- goto normal_image;
- } else {
- goto fallback_image;
- }
- }
- /* Nothing special needs to be done to find bus 0 */
- /* Allow the HT devices to be found */
-
- enumerate_ht_chain();
-
- bcm5785_enable_rom();
-
- bcm5785_enable_lpc();
-
- //enable RTC
- pc87417_enable_dev(RTC_DEV);
-
- /* Is this a deliberate reset by the bios */
-// post_code(0x22);
- if (bios_reset_detected() && last_boot_normal()) {
- goto normal_image;
- }
- /* This is the primary cpu how should I boot? */
- else if (do_normal_boot()) {
- goto normal_image;
- }
- else {
- goto fallback_image;
- }
- normal_image:
-// post_code(0x23);
- __asm__ volatile ("jmp __normal_image"
- : /* outputs */
- : "a" (bist), "b" (cpu_init_detectedx) /* inputs */
- );
-
- fallback_image:
-// post_code(0x25);
- ;
-}
-#endif /* CONFIG_USE_FALLBACK_IMAGE == 1 */
-
-void real_main(unsigned long bist, unsigned long cpu_init_detectedx);
+#define RC0 (6<<8)
+#define RC1 (7<<8)
void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
-{
-
-#if CONFIG_USE_FALLBACK_IMAGE == 1
- failover_process(bist, cpu_init_detectedx);
-#endif
- real_main(bist, cpu_init_detectedx);
-
-}
-
-void real_main(unsigned long bist, unsigned long cpu_init_detectedx)
{
static const uint16_t spd_addr[] = {
RC0|DIMM0, RC0|DIMM2, 0, 0,
RC0|DIMM1, RC0|DIMM3, 0, 0,
-#if CONFIG_MAX_PHYSICAL_CPUS > 1
RC1|DIMM0, RC1|DIMM2, 0, 0,
RC1|DIMM1, RC1|DIMM3, 0, 0,
-#endif
};
int needs_reset;
- unsigned bsp_apicid = 0;
-
+ unsigned bsp_apicid = 0, nodes;
struct mem_controller ctrl[8];
- unsigned nodes;
- if (bist == 0) {
- bsp_apicid = init_cpus(cpu_init_detectedx);
+ if (!cpu_init_detectedx && boot_cpu()) {
+ /* Nothing special needs to be done to find bus 0 */
+ /* Allow the HT devices to be found */
+ enumerate_ht_chain();
+ bcm5785_enable_lpc();
+ pc87417_enable_dev(RTC_DEV); /* Enable RTC */
}
-// post_code(0x32);
+
+ if (bist == 0)
+ bsp_apicid = init_cpus(cpu_init_detectedx);
pc87417_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE);
-// post_code(0x33);
-
uart_init();
-// post_code(0x34);
-
console_init();
/* Halt if there was a built in self test failure */
report_bist_failure(bist);
- print_debug("bsp_apicid="); print_debug_hex8(bsp_apicid); print_debug("\r\n");
+ print_debug("bsp_apicid="); print_debug_hex8(bsp_apicid); print_debug("\n");
setup_blast_resource_map();
-
+
#if 0
dump_pci_device(PCI_DEV(0, 0x18, 0));
dump_pci_device(PCI_DEV(0, 0x19, 0));
bcm5785_early_setup();
if (needs_reset) {
- print_info("ht reset -\r\n");
+ print_info("ht reset -\n");
soft_reset();
}
enable_smbus();
-#if 0
+#if 0
int i;
for(i=4;i<8;i++) {
change_i2c_mux(i);
#if 0
print_pci_devices();
-#endif
-
-#if 0
dump_pci_devices();
#endif
post_cache_as_ram();
-
}
projects / coreboot.git / blobdiff