Simplify a few code chunks, fix whitespace and indentation.
[coreboot.git] / src / mainboard / asus / m2v / romstage.c
index 4a9d5ccc12d3ad71f57b24bce53b9f5752e493b0..d56ca9ce11f062f6f2647f7c7f7078d4883f42dd 100644 (file)
 
 unsigned int get_sbdn(unsigned bus);
 
-/* Used by init_cpus and fidvid */
-#define SET_FIDVID 1
-
-/* If we want to wait for core1 done before DQS training, set it to 0. */
-#define SET_FIDVID_CORE0_ONLY 1
-
 #if CONFIG_K8_REV_F_SUPPORT == 1
 #define K8_REV_F_SUPPORT_F0_F1_WORKAROUND 0
 #endif
@@ -55,36 +49,29 @@ unsigned int get_sbdn(unsigned bus);
 #include "cpu/x86/mtrr/earlymtrr.c"
 #include "cpu/x86/bist.h"
 #include "northbridge/amd/amdk8/setup_resource_map.c"
+#include <spd.h>
 
 #define SERIAL_DEV PNP_DEV(0x2e, IT8712F_SP1)
 #define WATCHDOG_DEV PNP_DEV(0x2e, IT8712F_GPIO)
 
 #define IT8712F_GPIO_BASE              0x0a20
 
-static void memreset(int controllers, const struct mem_controller *ctrl)
-{
-}
+static void memreset(int controllers, const struct mem_controller *ctrl) { }
+static void activate_spd_rom(const struct mem_controller *ctrl) { }
 
 static inline int spd_read_byte(unsigned device, unsigned address)
 {
        return smbus_read_byte(device, address);
 }
 
-static void activate_spd_rom(const struct mem_controller *ctrl)
-{
-}
-
 // defines S3_NVRAM_EARLY:
 #include "southbridge/via/k8t890/k8t890_early_car.c"
-
 #include "northbridge/amd/amdk8/amdk8.h"
 #include "northbridge/amd/amdk8/incoherent_ht.c"
 #include "northbridge/amd/amdk8/coherent_ht.c"
 #include "northbridge/amd/amdk8/raminit_f.c"
 #include "lib/generic_sdram.c"
-
 #include "cpu/amd/dualcore/dualcore.c"
-
 #include "cpu/amd/car/post_cache_as_ram.c"
 #include "cpu/amd/model_fxx/init_cpus.c"
 #include "cpu/amd/model_fxx/fidvid.c"
@@ -237,11 +224,11 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
 {
        static const uint16_t spd_addr[] = {
                // Node 0
-               (0xa << 3) | 0, (0xa << 3) | 2, 0, 0,
-               (0xa << 3) | 1, (0xa << 3) | 3, 0, 0,
+               DIMM0, DIMM2, 0, 0,
+               DIMM1, DIMM3, 0, 0,
                // Node 1
-               (0xa << 3) | 4, (0xa << 3) | 6, 0, 0,
-               (0xa << 3) | 5, (0xa << 3) | 7, 0, 0,
+               DIMM4, DIMM6, 0, 0,
+               DIMM5, DIMM7, 0, 0,
        };
        unsigned bsp_apicid = 0;
        int needs_reset = 0;
@@ -309,4 +296,3 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
        sdram_initialize(sysinfo->nodes, sysinfo->ctrl, sysinfo);
        post_cache_as_ram();
 }
-