* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
-#define ASSEMBLY 1
-
-
#define RAMINIT_SYSINFO 1
#define CACHE_AS_RAM_ADDRESS_DEBUG 0
#define QRANK_DIMM_SUPPORT 1
/* Used by init_cpus and fidvid */
-#define K8_SET_FIDVID 1
+#define SET_FIDVID 1
/* If we want to wait for core1 done before DQS training, set it to 0. */
-#define K8_SET_FIDVID_CORE0_ONLY 1
+#define SET_FIDVID_CORE0_ONLY 1
#include <stdint.h>
#include <string.h>
#include "option_table.h"
#include "pc80/mc146818rtc_early.c"
#include "pc80/serial.c"
-#include "arch/i386/lib/console.c"
+#include "console/console.c"
#include <cpu/amd/model_fxx_rev.h>
#include "northbridge/amd/amdk8/raminit.h"
#include "cpu/amd/model_fxx/apic_timer.c"
#include "superio/winbond/w83627ehg/w83627ehg_early_serial.c"
#include "southbridge/via/vt8237r/vt8237r_early_smbus.c"
#include "northbridge/amd/amdk8/debug.c" /* After vt8237r_early_smbus.c! */
-#include "cpu/amd/mtrr/amd_earlymtrr.c"
+#include "cpu/x86/mtrr/earlymtrr.c"
#include "cpu/x86/bist.h"
#include "northbridge/amd/amdk8/setup_resource_map.c"
#define ACPI_DEV PNP_DEV(0x2e, W83627EHG_ACPI)
#define RTC_DEV PNP_DEV(0x2e, W83627EHG_RTC)
-static void memreset_setup(void)
-{
-}
-
static void memreset(int controllers, const struct mem_controller *ctrl)
{
}
return smbus_read_byte(device, address);
}
-void activate_spd_rom(const struct mem_controller *ctrl)
+static void activate_spd_rom(const struct mem_controller *ctrl)
{
}
-void soft_reset(void)
+static void soft_reset(void)
{
uint8_t tmp;
set_bios_reset();
- print_debug("soft reset \r\n");
+ print_debug("soft reset \n");
/* PCI reset */
tmp = pci_read_config8(PCI_DEV(0, 0x11, 0), 0x4f);
#define K8_4RANK_DIMM_SUPPORT 1
#include "northbridge/amd/amdk8/amdk8.h"
-#include "northbridge/amd/amdk8/raminit.c"
-#include "northbridge/amd/amdk8/coherent_ht.c"
#include "northbridge/amd/amdk8/incoherent_ht.c"
+#include "northbridge/amd/amdk8/coherent_ht.c"
+#include "northbridge/amd/amdk8/raminit.c"
#include "lib/generic_sdram.c"
+
#include "cpu/amd/dualcore/dualcore.c"
#include "southbridge/via/k8t890/k8t890_early_car.c"
-#include "cpu/amd/car/copy_and_run.c"
+
#include "cpu/amd/car/post_cache_as_ram.c"
#include "cpu/amd/model_fxx/init_cpus.c"
#include "cpu/amd/model_fxx/fidvid.c"
#include "northbridge/amd/amdk8/resourcemap.c"
-void hard_reset(void)
-{
- print_info("NO HARD RESET. FIX ME!\n");
-}
-
unsigned int get_sbdn(unsigned bus)
{
device_t dev;
return (dev >> 15) & 0x1f;
}
-void sio_init(void)
+static void sio_init(void)
{
u8 reg;
void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
{
static const uint16_t spd_addr[] = {
+ // Node 0
(0xa << 3) | 0, (0xa << 3) | 2, 0, 0,
(0xa << 3) | 1, (0xa << 3) | 3, 0, 0,
-#if CONFIG_MAX_PHYSICAL_CPUS > 1
+ // Node 1
(0xa << 3) | 4, (0xa << 3) | 6, 0, 0,
(0xa << 3) | 5, (0xa << 3) | 7, 0, 0,
-#endif
};
unsigned bsp_apicid = 0;
int needs_reset = 0;
- struct sys_info *sysinfo =
- (CONFIG_DCACHE_RAM_BASE + CONFIG_DCACHE_RAM_SIZE - CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE);
- char *p;
+ struct sys_info *sysinfo = (struct sys_info *)(CONFIG_DCACHE_RAM_BASE
+ + CONFIG_DCACHE_RAM_SIZE - CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE);
sio_init();
w83627ehg_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE);
console_init();
enable_rom_decode();
- print_info("now booting... fallback\r\n");
+ print_info("now booting... fallback\n");
/* Is this a CPU only reset? Or is this a secondary CPU? */
if (!cpu_init_detectedx && boot_cpu()) {
console_init();
enable_rom_decode();
- print_info("now booting... real_main\r\n");
+ print_info("now booting... real_main\n");
if (bist == 0)
bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo);
setup_coherent_ht_domain();
wait_all_core0_started();
- print_info("now booting... Core0 started\r\n");
+ print_info("now booting... Core0 started\n");
#if CONFIG_LOGICAL_CPUS==1
/* It is said that we should start core1 after all core0 launched. */
needs_reset |= k8t890_early_setup_ht();
if (needs_reset) {
- print_debug("ht reset -\r\n");
+ print_debug("ht reset -\n");
soft_reset();
}
fill_mem_ctrl(sysinfo->nodes, sysinfo->ctrl, spd_addr);
enable_smbus();
- memreset_setup();
sdram_initialize(sysinfo->nodes, sysinfo->ctrl, sysinfo);
post_cache_as_ram();
}
+