Remove comments that are obsolete since r6028.
[coreboot.git] / src / mainboard / amd / serengeti_cheetah / romstage.c
index 9b482e4578b76f251f7950749fc68f566396e928..20bf06e9dc10ace95fbd455630a4ce18bb64fe4c 100644 (file)
@@ -1,10 +1,4 @@
-#define RAMINIT_SYSINFO 1
-#define CACHE_AS_RAM_ADDRESS_DEBUG 0
-
-#define SET_NB_CFG_54 1 
-
-//used by raminit
-#define QRANK_DIMM_SUPPORT 1
+#define SET_NB_CFG_54 1
 
 //used by incoherent_ht
 //#define K8_ALLOCATE_IO_RANGE 1
 #include <device/pnp_def.h>
 #include <arch/romcc_io.h>
 #include <cpu/x86/lapic.h>
-#include "option_table.h"
-#include "pc80/mc146818rtc_early.c"
+#include <pc80/mc146818rtc.h>
 
-#include "pc80/serial.c"
-#include "console/console.c"
+#include <console/console.h>
 #include <cpu/amd/model_fxx_rev.h>
 #include "southbridge/amd/amd8111/amd8111_early_smbus.c"
 #include <reset.h>
@@ -101,16 +93,13 @@ static inline int spd_read_byte(unsigned device, unsigned address)
 }
 
 #include "northbridge/amd/amdk8/amdk8.h"
-#include "northbridge/amd/amdk8/coherent_ht.c"
-
 #include "northbridge/amd/amdk8/incoherent_ht.c"
-
+#include "northbridge/amd/amdk8/coherent_ht.c"
 #include "northbridge/amd/amdk8/raminit_f.c"
-
 #include "lib/generic_sdram.c"
 
  /* tyan does not want the default */
-#include "resourcemap.c" 
+#include "resourcemap.c"
 
 #include "cpu/amd/dualcore/dualcore.c"
 
@@ -189,7 +178,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
         console_init();
 
 //     dump_mem(CONFIG_DCACHE_RAM_BASE+CONFIG_DCACHE_RAM_SIZE-0x200, CONFIG_DCACHE_RAM_BASE+CONFIG_DCACHE_RAM_SIZE);
-       
+
        /* Halt if there was a built in self test failure */
        report_bist_failure(bist);
 
@@ -204,21 +193,21 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
        print_debug("bsp_apicid="); print_debug_hex8(bsp_apicid); print_debug("\n");
 
 #if CONFIG_MEM_TRAIN_SEQ == 1
-        set_sysinfo_in_ram(0); // in BSP so could hold all ap until sysinfo is in ram 
+        set_sysinfo_in_ram(0); // in BSP so could hold all ap until sysinfo is in ram
 #endif
        setup_coherent_ht_domain(); // routing table and start other core0
 
        wait_all_core0_started();
 #if CONFIG_LOGICAL_CPUS==1
         // It is said that we should start core1 after all core0 launched
-       /* becase optimize_link_coherent_ht is moved out from setup_coherent_ht_domain, 
+       /* becase optimize_link_coherent_ht is moved out from setup_coherent_ht_domain,
         * So here need to make sure last core0 is started, esp for two way system,
-        * (there may be apic id conflicts in that case) 
+        * (there may be apic id conflicts in that case)
         */
         start_other_cores();
        wait_all_other_cores_started(bsp_apicid);
 #endif
-       
+
        /* it will set up chains and store link pair for optimization later */
         ht_setup_chains_x(sysinfo); // it will init sblnk and sbbusn, nodes, sbdn
 
@@ -252,7 +241,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
         {
                 msr_t msr;
                 msr=rdmsr(0xc0010042);
-                print_debug("end   msr fid, vid "); print_debug_hex32( msr.hi ); print_debug_hex32(msr.lo); print_debug("\n"); 
+                print_debug("end   msr fid, vid "); print_debug_hex32( msr.hi ); print_debug_hex32(msr.lo); print_debug("\n");
 
         }