this should get the VIA VT8454c in shape with Kconfig
[coreboot.git] / src / mainboard / amd / serengeti_cheetah / Config.lb
index a0ff3aef73c1084c6b2eb0470ebc77825a1b8c69..1e2f1b2046347d7cb791bc5a44330cbbabd2a0ea 100644 (file)
@@ -1,50 +1,6 @@
-##
-## Compute the location and size of where this firmware image
-## (coreboot plus bootloader) will live in the boot rom chip.
-##
-if USE_FAILOVER_IMAGE
-       default ROM_SECTION_SIZE   = FAILOVER_SIZE
-       default ROM_SECTION_OFFSET = ( ROM_SIZE - FAILOVER_SIZE )
-else
-    if USE_FALLBACK_IMAGE
-       default ROM_SECTION_SIZE   = FALLBACK_SIZE
-       default ROM_SECTION_OFFSET = ( ROM_SIZE - FALLBACK_SIZE - FAILOVER_SIZE )
-    else
-       default ROM_SECTION_SIZE   = ( ROM_SIZE - FALLBACK_SIZE - FAILOVER_SIZE )
-       default ROM_SECTION_OFFSET = 0
-    end
-end
-
-##
-## Compute the start location and size size of
-## The coreboot bootloader.
-##
-default PAYLOAD_SIZE            = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE )
-default CONFIG_ROM_PAYLOAD_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1)
-
-##
-## Compute where this copy of coreboot will start in the boot rom
-##
-default _ROMBASE      = ( CONFIG_ROM_PAYLOAD_START + PAYLOAD_SIZE )
-
-##
-## Compute a range of ROM that can cached to speed up coreboot,
-## execution speed.
-##
-## XIP_ROM_SIZE must be a power of 2.
-## XIP_ROM_BASE must be a multiple of XIP_ROM_SIZE
-##
-default XIP_ROM_SIZE=65536
-
-if USE_FAILOVER_IMAGE
-       default XIP_ROM_BASE = ( _ROMBASE - XIP_ROM_SIZE + ROM_IMAGE_SIZE)
-else
-    if USE_FALLBACK_IMAGE
-       default XIP_ROM_BASE = ( _ROMBASE - XIP_ROM_SIZE + ROM_IMAGE_SIZE + FAILOVER_SIZE)
-    else
-       default XIP_ROM_BASE = ( _ROMBASE - XIP_ROM_SIZE + ROM_IMAGE_SIZE)
-    end
-end
+## CONFIG_XIP_ROM_SIZE must be a power of 2.
+default CONFIG_XIP_ROM_SIZE = 64 * 1024
+include /config/failovercalculation.lb
 
 arch i386 end 
 
@@ -59,25 +15,25 @@ driver mainboard.o
 #needed by irq_tables and mptable and acpi_tables
 object get_bus_conf.o
 
-if HAVE_MP_TABLE 
+if CONFIG_GENERATE_MP_TABLE 
        object mptable.o 
 end
 
-if HAVE_PIRQ_TABLE 
+if CONFIG_GENERATE_PIRQ_TABLE 
        object irq_tables.o 
 end
 
-#if HAVE_ACPI_TABLES
+#if CONFIG_GENERATE_ACPI_TABLES
 #       object acpi_tables.o
 #       object fadt.o
-#       if SB_HT_CHAIN_ON_BUS0
+#       if CONFIG_SB_HT_CHAIN_ON_BUS0
 #               object dsdt_bus0.o
 #       else
 #               object dsdt.o
 #       end
 #       object ssdt.o
-#       if ACPI_SSDTX_NUM
-#                if SB_HT_CHAIN_ON_BUS0
+#       if CONFIG_ACPI_SSDTX_NUM
+#                if CONFIG_SB_HT_CHAIN_ON_BUS0
 #                 object ssdt2_bus0.o
 #                else
 #                 object ssdt2.o
@@ -85,36 +41,36 @@ end
 #       end
 #end
 
-if HAVE_ACPI_TABLES
+if CONFIG_GENERATE_ACPI_TABLES
         object acpi_tables.o
         object fadt.o
        makerule dsdt.c
-               depends "$(MAINBOARD)/dx/dsdt_lb.dsl"
-               action  "iasl -p $(PWD)/dsdt_lb -tc $(MAINBOARD)/dx/dsdt_lb.dsl"
+               depends "$(CONFIG_MAINBOARD)/dx/dsdt_lb.dsl"
+               action  "iasl -p $(CURDIR)/dsdt_lb -tc $(CONFIG_MAINBOARD)/dx/dsdt_lb.dsl"
                action  "mv dsdt_lb.hex dsdt.c"
        end
         object ./dsdt.o
 
        #./ssdt.o is moved to northbridge/amd/amdk8/Config.lb
        
-        if ACPI_SSDTX_NUM
+        if CONFIG_ACPI_SSDTX_NUM
             makerule ssdt2.c
-                        depends "$(MAINBOARD)/dx/pci2.asl"
-                        action  "iasl -p $(PWD)/pci2 -tc $(MAINBOARD)/dx/pci2.asl"
+                        depends "$(CONFIG_MAINBOARD)/dx/pci2.asl"
+                        action  "iasl -p $(CURDIR)/pci2 -tc $(CONFIG_MAINBOARD)/dx/pci2.asl"
                         action  "perl -pi -e 's/AmlCode/AmlCode_ssdt2/g' pci2.hex"
                         action  "mv pci2.hex ssdt2.c"
             end
             object ./ssdt2.o
             makerule ssdt3.c
-                        depends "$(MAINBOARD)/dx/pci3.asl"
-                        action  "iasl -p $(PWD)/pci3 -tc $(MAINBOARD)/dx/pci3.asl"
+                        depends "$(CONFIG_MAINBOARD)/dx/pci3.asl"
+                        action  "iasl -p $(CURDIR)/pci3 -tc $(CONFIG_MAINBOARD)/dx/pci3.asl"
                         action  "perl -pi -e 's/AmlCode/AmlCode_ssdt3/g' pci3.hex"
                         action  "mv pci3.hex ssdt3.c"
             end
             object ./ssdt3.o
             makerule ssdt4.c
-                        depends "$(MAINBOARD)/dx/pci4.asl"
-                        action  "iasl -p $(PWD)/pci4 -tc $(MAINBOARD)/dx/pci4.asl"
+                        depends "$(CONFIG_MAINBOARD)/dx/pci4.asl"
+                        action  "iasl -p $(CURDIR)/pci4 -tc $(CONFIG_MAINBOARD)/dx/pci4.asl"
                         action  "perl -pi -e 's/AmlCode/AmlCode_ssdt4/g' pci4.hex"
                         action  "mv pci4.hex ssdt4.c"
             end
@@ -125,26 +81,26 @@ end
        if CONFIG_USE_INIT
                # compile cache_as_ram.c to auto.o
                makerule ./cache_as_ram_auto.o
-                       depends "$(MAINBOARD)/cache_as_ram_auto.c option_table.h"
-                       action "$(CC) $(DISTRO_CFLAGS) -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/cache_as_ram_auto.c -Os -nostdinc -nostdlib -fno-builtin -Wall -c -o $@" 
+                       depends "$(CONFIG_MAINBOARD)/cache_as_ram_auto.c option_table.h"
+                       action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) -I$(TOP)/src -I. -c $(CONFIG_MAINBOARD)/cache_as_ram_auto.c -o $@"
                end
 
        else   
                #compile cache_as_ram.c to auto.inc 
                makerule ./cache_as_ram_auto.inc
-                       depends "$(MAINBOARD)/cache_as_ram_auto.c option_table.h"
-                       action "$(CC) $(DISTRO_CFLAGS) -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/cache_as_ram_auto.c -Os -nostdinc -nostdlib -fno-builtin -Wall $(DEBUG_CFLAGS) -c -S -o $@"         
+                       depends "$(CONFIG_MAINBOARD)/cache_as_ram_auto.c option_table.h"
+                       action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) $(DEBUG_CFLAGS) -I$(TOP)/src -I. -c -S $(CONFIG_MAINBOARD)/cache_as_ram_auto.c -o $@"
                        action "perl -e 's/\.rodata/.rom.data/g' -pi $@"
                        action "perl -e 's/\.text/.section .rom.text/g' -pi $@"
                end
        end
 
-if USE_FAILOVER_IMAGE
+if CONFIG_USE_FAILOVER_IMAGE
 else
     if CONFIG_AP_CODE_IN_CAR
        makerule ./apc_auto.o
-               depends "$(MAINBOARD)/apc_auto.c option_table.h"
-               action "$(CC) -I$(TOP)/src -I. $(DISTRO_CFLAGS) $(CPPFLAGS) $(MAINBOARD)/apc_auto.c -Os -nostdinc -nostdlib -fno-builtin -Wall -c -o $@"
+               depends "$(CONFIG_MAINBOARD)/apc_auto.c option_table.h"
+               action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) -I$(TOP)/src -I. -c $(CONFIG_MAINBOARD)/apc_auto.c -o $@"
        end
        ldscript /arch/i386/init/ldscript_apc.lb
     end
@@ -154,13 +110,13 @@ end
 ## Build our 16 bit and 32 bit coreboot entry code
 ##
 
-if HAVE_FAILOVER_BOOT
-    if USE_FAILOVER_IMAGE
+if CONFIG_HAVE_FAILOVER_BOOT
+    if CONFIG_USE_FAILOVER_IMAGE
        mainboardinit cpu/x86/16bit/entry16.inc
        ldscript /cpu/x86/16bit/entry16.lds
     end
 else
-    if USE_FALLBACK_IMAGE
+    if CONFIG_USE_FALLBACK_IMAGE
        mainboardinit cpu/x86/16bit/entry16.inc
        ldscript /cpu/x86/16bit/entry16.lds
     end
@@ -178,8 +134,8 @@ mainboardinit cpu/x86/32bit/entry32.inc
 ##
 ## Build our reset vector (This is where coreboot is entered)
 ##
-if HAVE_FAILOVER_BOOT
-    if USE_FAILOVER_IMAGE 
+if CONFIG_HAVE_FAILOVER_BOOT
+    if CONFIG_USE_FAILOVER_IMAGE 
        mainboardinit cpu/x86/16bit/reset16.inc 
        ldscript /cpu/x86/16bit/reset16.lds 
     else
@@ -187,7 +143,7 @@ if HAVE_FAILOVER_BOOT
        ldscript /cpu/x86/32bit/reset32.lds 
     end
 else
-    if USE_FALLBACK_IMAGE 
+    if CONFIG_USE_FALLBACK_IMAGE 
        mainboardinit cpu/x86/16bit/reset16.inc 
        ldscript /cpu/x86/16bit/reset16.lds 
     else
@@ -212,12 +168,12 @@ ldscript /arch/i386/lib/id.lds
 ### Things are delicate and we test to see if we should
 ### failover to another image.
 ###
-if HAVE_FAILOVER_BOOT
-    if USE_FAILOVER_IMAGE
+if CONFIG_HAVE_FAILOVER_BOOT
+    if CONFIG_USE_FAILOVER_IMAGE
                ldscript /arch/i386/lib/failover_failover.lds
     end
 else
-    if USE_FALLBACK_IMAGE
+    if CONFIG_USE_FALLBACK_IMAGE
                ldscript /arch/i386/lib/failover.lds
     end
 end