printk_foo -> printk(BIOS_FOO, ...)

[coreboot.git] / src / mainboard / amd / dbm690t / mainboard.c

diff --git a/src/mainboard/amd/dbm690t/mainboard.c b/src/mainboard/amd/dbm690t/mainboard.c
index 3d5ca18e8289022afad970a5e4d00c2b46c0086e..c85c210a5b772bbc47a9cd702099e4180fdcc332 100644 (file)
--- a/src/mainboard/amd/dbm690t/mainboard.c
+++ b/src/mainboard/amd/dbm690t/mainboard.c
@@ -61,7 +61,7 @@ static void enable_onboard_nic()
 {
        u8 byte;
 
-       printk_info("%s.\n", __func__);
+       printk(BIOS_INFO, "%s.\n", __func__);
 
        /* set index register 0C50h to 13h (miscellaneous control) */
        outb(0x13, 0xC50);      /* CMIndex */
@@ -100,7 +100,7 @@ static void get_ide_dma66()
        struct device *sm_dev;
        struct device *ide_dev;
 
-       printk_info("%s.\n", __func__);
+       printk(BIOS_INFO, "%s.\n", __func__);
        sm_dev = dev_find_slot(0, PCI_DEVFN(0x14, 0));
 
        byte = pci_read_config8(sm_dev, 0xA9);
@@ -137,7 +137,7 @@ static void set_thermal_config()
 
        byte = ADT7461_read_byte(0x02); /* read status register to clear it */
        ARA_read_byte(0x05); /* A hardware alert can only be cleared by the master sending an ARA as a read command */
-       printk_info("Init adt7461 end , status 0x02 %02x\n", byte);
+       printk(BIOS_INFO, "Init adt7461 end , status 0x02 %02x\n", byte);
 
        /* sb600 settings for thermal config */
        /* set SB600 GPIO 64 to GPIO with pull-up */
@@ -190,19 +190,19 @@ void dbm690t_enable(device_t dev)
        struct mainboard_config *mainboard =
            (struct mainboard_config *)dev->chip_info;
 
-       printk_info("Mainboard DBM690T Enable. dev=0x%p\n", dev);
+       printk(BIOS_INFO, "Mainboard DBM690T Enable. dev=0x%p\n", dev);
 
 #if (CONFIG_GFXUMA == 1)
        msr_t msr, msr2;
 
        /* TOP_MEM: the top of DRAM below 4G */
        msr = rdmsr(TOP_MEM);
-       printk_info("%s, TOP MEM: msr.lo = 0x%08x, msr.hi = 0x%08x\n",
+       printk(BIOS_INFO, "%s, TOP MEM: msr.lo = 0x%08x, msr.hi = 0x%08x\n",
                    __func__, msr.lo, msr.hi);
 
        /* TOP_MEM2: the top of DRAM above 4G */
        msr2 = rdmsr(TOP_MEM2);
-       printk_info("%s, TOP MEM2: msr2.lo = 0x%08x, msr2.hi = 0x%08x\n",
+       printk(BIOS_INFO, "%s, TOP MEM2: msr2.lo = 0x%08x, msr2.hi = 0x%08x\n",
                    __func__, msr2.lo, msr2.hi);
 
        switch (msr.lo) {
@@ -224,7 +224,7 @@ void dbm690t_enable(device_t dev)
        }
 
        uma_memory_base = msr.lo - uma_memory_size;     /* TOP_MEM1 */
-       printk_info("%s: uma size 0x%08llx, memory start 0x%08llx\n",
+       printk(BIOS_INFO, "%s: uma size 0x%08llx, memory start 0x%08llx\n",
                    __func__, uma_memory_size, uma_memory_base);
 
        /* TODO: TOP_MEM2 */
@@ -244,7 +244,7 @@ int add_mainboard_resources(struct lb_memory *mem)
         * in some circumstances we want the memory mentioned as reserved.
         */
 #if (CONFIG_GFXUMA == 1)
-       printk_info("uma_memory_base=0x%llx, uma_memory_size=0x%llx \n",
+       printk(BIOS_INFO, "uma_memory_base=0x%llx, uma_memory_size=0x%llx \n",
        uma_memory_base, uma_memory_size);
        lb_add_memory_range(mem, LB_MEM_RESERVED,
                uma_memory_base, uma_memory_size);