+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2003-2004 Linux Networx
+ * (Written by Eric Biederman <ebiederman@lnxi.com> for Linux Networx)
+ * Copyright (C) 2003 Ronald G. Minnich <rminnich@gmail.com>
+ * Copyright (C) 2004-2005 Li-Ta Lo <ollie@lanl.gov>
+ * Copyright (C) 2005 Tyan
+ * (Written by Yinghai Lu <yhlu@tyan.com> for Tyan)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
#include <console/console.h>
#include <device/device.h>
#include <device/pci.h>
+#include <part/hard_reset.h>
/**
* Read the resources for the root device,
}
/**
- * @brief Write the resources for the root device
+ * @brief Write the resources for every device
*
+ * Write the resources for the root device,
* and every device under it which are all of the devices.
* @param root Pointer to the device structure for the system root device
*/
struct bus *bus;
bus = &root->link[0];
- compute_allocate_resource(bus, &root->resource[0],
- IORESOURCE_IO, IORESOURCE_IO);
- compute_allocate_resource(bus, &root->resource[1],
- IORESOURCE_MEM, IORESOURCE_MEM);
+ compute_allocate_resource(bus,
+ &root->resource[0], IORESOURCE_IO, IORESOURCE_IO);
+ compute_allocate_resource(bus,
+ &root->resource[1], IORESOURCE_MEM, IORESOURCE_MEM);
assign_resources(bus);
}
*
* The enumeration of certain buses is purely static. The existence of
* devices on those buses can be completely determined at compile time
- * and is specified in the config file. Typical exapmles are the 'PNP'
- * devices on a legacy ISA/LPC bus. There is no need of probing of any
- * kind, the only thing we have to do is to walk through the bus and
+ * and is specified in the config file. Typical examples are the 'PNP'
+ * devices on a legacy ISA/LPC bus. There is no need of probing of any kind,
+ * the only thing we have to do is to walk through the bus and
* enable or disable devices as indicated in the config file.
*
* On the other hand, some devices are virtual and their existence is
* This function is the default scan_bus() method for the root device and
* LPC bridges.
*
- * @param root Pointer to the root device which the static buses are attached
+ * @param bus Pointer to the device structure which the static buses are attached
* @param max Maximum bus number currently used before scanning.
- * @return Largest bus number used after scanning.
+ * @return Largest bus number used.
*/
-unsigned int scan_static_bus(device_t root, unsigned int max)
+static int smbus_max = 0;
+unsigned int scan_static_bus(device_t bus, unsigned int max)
{
device_t child;
unsigned link;
- printk_spew("%s for %s\n", __func__, dev_path(root));
+ printk_spew("%s for %s\n", __func__, dev_path(bus));
- for (link = 0; link < root->links; link++) {
- for (child = root->link[link].children; child; child = child->sibling) {
+ for(link = 0; link < bus->links; link++) {
+ /* for smbus bus enumerate */
+ child = bus->link[link].children;
+ if(child && child->path.type == DEVICE_PATH_I2C) {
+ bus->link[link].secondary = ++smbus_max;
+ }
+ for(child = bus->link[link].children; child; child = child->sibling) {
if (child->chip_ops && child->chip_ops->enable_dev) {
child->chip_ops->enable_dev(child);
}
if (child->ops && child->ops->enable) {
child->ops->enable(child);
}
- if (child->path.type == DEVICE_PATH_I2C)
- printk_debug("smbus: %s[%d]->", dev_path(child->bus->dev), child->bus->link );
- printk_debug("%s %s\n", dev_path(child),
- child->enabled?"enabled": "disabled");
+ if (child->path.type == DEVICE_PATH_I2C) {
+ printk_debug("smbus: %s[%d]->",
+ dev_path(child->bus->dev), child->bus->link );
+ }
+ printk_debug("%s %s\n",
+ dev_path(child),
+ child->enabled?"enabled": "disabled");
}
}
- for (link = 0; link < root->links; link++) {
- for (child = root->link[link].children; child; child = child->sibling) {
+ for(link = 0; link < bus->links; link++) {
+ for(child = bus->link[link].children; child; child = child->sibling) {
if (!child->ops || !child->ops->scan_bus)
continue;
printk_spew("%s scanning...\n", dev_path(child));
- max = child->ops->scan_bus(child, max);
+ max = scan_bus(child, max);
}
}
- printk_spew("%s for %s done\n", __func__, dev_path(root));
+ printk_spew("%s for %s done\n", __func__, dev_path(bus));
return max;
}
*
* @param dev the device whos children's resources are to be enabled
*
- * This function is call by the global enable_resources() indirectly via the
+ * This function is called by the global enable_resource() indirectly via the
* device_operation::enable_resources() method of devices.
*
* Indirect mutual recursion:
void enable_childrens_resources(device_t dev)
{
unsigned link;
- for (link = 0; link < dev->links; link++) {
+ for(link = 0; link < dev->links; link++) {
device_t child;
- for (child = dev->link[link].children; child; child = child->sibling) {
+ for(child = dev->link[link].children; child; child = child->sibling) {
enable_resources(child);
}
}
{
}
+void root_dev_reset(struct bus *bus)
+{
+ printk_info("Reseting board...\n");
+ hard_reset();
+}
+
/**
* @brief Default device operation for root device
*
.enable_resources = root_dev_enable_resources,
.init = root_dev_init,
.scan_bus = root_dev_scan_bus,
+ .reset_bus = root_dev_reset,
};
/**
projects / coreboot.git / blobdiff