}
#endif
+/**************************************************************************
+ *
+ * pcideadlock
+ *
+ * Bugtool #465 and #609
+ * PCI cache deadlock
+ * There is also fix code in cache and PCI functions. This bug is very is pervasive.
+ *
+ * Entry:
+ * Exit:
+ * Modified:
+ *
+ **************************************************************************/
static void
-pcideadlock(void){
+pcideadlock(void)
+{
msr_t msr;
+ /*
+ * forces serialization of all load misses. Setting this bit prevents the
+ * DM pipe from backing up if a read request has to be held up waiting
+ * for PCI writes to complete.
+ */
msr = rdmsr(CPU_DM_CONFIG0);
msr.hi &= ~(7<<DM_CONFIG0_UPPER_WSREQ_SHIFT);
msr.hi |= (2<<DM_CONFIG0_UPPER_WSREQ_SHIFT);
msr.lo |= DM_CONFIG0_LOWER_MISSER_SET;
wrmsr(CPU_DM_CONFIG0, msr);
-
-
+ /* interlock instruction fetches to WS regions with data accesses.
+ * This prevents an instruction fetch from going out to PCI if the
+ * data side is about to make a request.
+ */
msr = rdmsr(CPU_IM_CONFIG);
- msr.lo |= IM_CONFIG_LOWER_QWT_SET; /* interlock instruction fetches to WS regions with data accesses.
- * This prevents in instruction fetch from going out to PCI if the
- * data side is about to make a request.
- */
+ msr.lo |= IM_CONFIG_LOWER_QWT_SET;
wrmsr(CPU_IM_CONFIG, msr);
- /* write serialize memory hole to PCI. Need to to unWS when something is shadowed regardless of cachablility.*/
-
+
+ /* write serialize memory hole to PCI. Need to unWS when something is
+ * shadowed regardless of cachablility.
+ */
msr.lo = 0x021212121;
msr.hi = 0x021212121;
wrmsr( CPU_RCONF_A0_BF, msr);
wrmsr( CPU_RCONF_E0_FF, msr);
}
-/****************************************************************************/
-/***/
-/** CPUbug784*/
-/***/
-/** Bugtool #784 + #792*/
-/***/
-/** Fix CPUID instructions for < 3.0 CPUs*/
-/***/
-/** Entry:*/
-/** Exit:*/
-/** Modified:*/
-/***/
-/****************************************************************************/
-
-void bug784(void){
+/****************************************************************************
+ *
+ * CPUbug784
+ *
+ * Bugtool #784 + #792
+ *
+ * Fix CPUID instructions for < 3.0 CPUs
+ *
+ * Entry:
+ * Exit:
+ * Modified:
+ *
+ ****************************************************************************/
+
+void bug784(void)
+{
msr_t msr;
-// static char *name = "Geode by NSC";
+ //static char *name = "Geode by NSC";
/* we'll do this the stupid way, for now, but that's the string they want. NO ONE KNOWS why you
- * would do this -- the OS can figure this type of stuff out!
- */
+ * would do this -- the OS can figure this type of stuff out!
+ */
msr = rdmsr(0x3006);
msr.hi = 0x646f6547;
wrmsr(0x3006, msr);
msr = rdmsr(0x3002);
wrmsr(0x3008, msr);
-/* More CPUID to match AMD better. #792*/
+ /* More CPUID to match AMD better. #792*/
msr = rdmsr(0x3009);
msr.hi = 0x0C0C0A13D;
msr.lo = 0x00000000;
}
/* cpubug 1398: enable MC if we KNOW we have DDR*/
-void
-eng1398(void){
+/**************************************************************************
+ *
+ * CPUbugIAENG1398
+ *
+ * ClearQuest #IAENG1398
+ * The MC can not be enabled with SDR memory but can for DDR. Enable for
+ * DDR here if the setup token is "Default"
+ * Add this back to core by default once 2.0 CPUs are not supported.
+ * Entry:
+ * Exit:
+ * Modified:
+ *
+ **************************************************************************/
+void eng1398(void)
+{
msr_t msr;
msr = rdmsr(MSR_GLCP+0x17);
- if ((msr.lo & 0xff) < CPU_REV_2_0) {
+ if ((msr.lo & 0xff) <= CPU_REV_2_0) {
msr = rdmsr(GLCP_SYS_RSTPLL);
if (msr.lo & (1<<RSTPPL_LOWER_SDRMODE_SHIFT))
return;
}
- /* no bios to check, we just go for it? */
+ /* no CMOS/NVRAM to check, so enable MC Clock Gating */
msr = rdmsr(MC_GLD_MSR_PM);
msr.lo |= 3; /* enable MC clock gating.*/
wrmsr(MC_GLD_MSR_PM, msr);
}
+/***************************************************************************
+ *
+ * CPUbugIAENG2900
+ *
+ * Clear Quest IAENG00002900, VSS 118.150
+ *
+ * BTB issue causes blue screen in windows, but the fix is required
+ * for all operating systems.
+ *
+ * Entry:
+ * Exit:
+ * Modified:
+ *
+ **************************************************************************/
void
-eng2900(void){
- printk_err(" NOT DOING eng2900: only shown to be a windows problem\n");
-#if 0
+eng2900(void)
+{
+ msr_t msr;
-;**************************************************************************
-;*
-;* CPUbugIAENG2900
-;*
-;* Clear Quest IAENG00002900, VSS 118.150
-;*
-;* BTB issue causes blue screen in windows.
-;*
-;* Entry:
-;* Exit:
-;* Modified:
-;*
-;**************************************************************************
-CPUbugIAENG2900 PROC NEAR PUBLIC
- pushad
-
-; Clear bit 43, disables the sysenter/sysexit in CPUID3
- mov ecx, 3003h
- RDMSR
- and edx, 0FFFFF7FFh
- WRMSR
-
- mov cx, TOKEN_BTB_2900_SWAPSIF_ENABLE
- NOSTACK bx, GetNVRAMValueBX
- cmp ax, TVALUE_ENABLE
- jne bug2900exit
-
-
-;Disable enable_actions in DIAGCTL while setting up GLCP
- mov ecx, MSR_GLCP + 005fh
- xor edx, edx
- xor eax, eax
- WRMSR
-
-;Changing DBGCLKCTL register to GeodeLink
- mov ecx, MSR_GLCP + 0016h
- xor edx, edx
- xor eax, eax
- WRMSR
-
- mov ecx, MSR_GLCP + 0016h
- xor edx, edx
- mov eax, 02h
- WRMSR
-
-;The code below sets up the RedCloud to stall for 4 GeodeLink clocks when CPU is snooped.
-;Because setting XSTATE to 0 overrides any other XSTATE action, the code will always
-;stall for 4 GeodeLink clocks after a snoop request goes away even if it occured a clock or two
-;later than a different snoop; the stall signal will never 'glitch high' for
-;only one or two CPU clocks with this code.
-
-;Send mb0 port 3 requests to upper GeodeLink diag bits [63:32]
- mov ecx, MSR_GLIU0 + 2005h
- xor edx, edx
- mov eax, 80338041h
- WRMSR
-
-;set5m watches request ready from mb0 to CPU (snoop)
- mov ecx, MSR_GLCP + 0045h
- mov edx, 5ad68000h
- xor eax, eax
- WRMSR
-
-;SET4M will be high when state is idle (XSTATE=11)
- mov ecx, MSR_GLCP + 0044h
- xor edx, edx
- mov eax, 0140h
- WRMSR
-
-;SET5n to watch for processor stalled state
- mov ecx, MSR_GLCP + 004Dh
- mov edx, 2000h
- xor eax, eax
- WRMSR
-
-;Writing action number 13: XSTATE=0 to occur when CPU is snooped unless we're stalled
- mov ecx, MSR_GLCP + 0075h
- xor edx, edx
- mov eax, 00400000h
- WRMSR
-
-;Writing action number 11: inc XSTATE every GeodeLink clock unless we're idle
- mov ecx, MSR_GLCP + 0073h
- xor edx, edx
- mov eax, 30000h
- WRMSR
-
-
-;Writing action number 5: STALL_CPU_PIPE when exitting idle state or not in idle state
- mov ecx, MSR_GLCP + 006Dh
- xor edx, edx
- mov eax, 00430000h
- WRMSR
-
-;Writing DIAGCTL Register to enable the stall action and to let set5m watch the upper GeodeLink diag bits.
- mov ecx, MSR_GLCP + 005fh
- xor edx, edx
- mov eax, 80004000h
- WRMSR
-
-
-bug2900exit:
- popad
- ret
-CPUbugIAENG2900 ENDP
-#endif
+ printk(BIOS_DEBUG, "CPU_BUG:%s\n", __func__);
+ /* Clear bit 43, disables the sysenter/sysexit in CPUID3 */
+ msr = rdmsr(0x3003);
+ msr.hi &= 0xFFFFF7FF;
+ wrmsr(0x3003, msr);
+
+ /* change this value to zero if you need to disable this BTB SWAPSiF. */
+ if (1) {
+
+ /* Disable enable_actions in DIAGCTL while setting up GLCP */
+ msr.hi = 0;
+ msr.lo = 0;
+ wrmsr(MSR_GLCP + 0x005f, msr);
+
+ /* Changing DBGCLKCTL register to GeodeLink */
+ msr.hi = 0;
+ msr.lo = 0;
+ wrmsr(MSR_GLCP + 0x0016, msr);
+
+ msr.hi = 0;
+ msr.lo = 2;
+ wrmsr(MSR_GLCP + 0x0016, msr);
+
+ /* The code below sets up the CPU to stall for 4 GeodeLink
+ * clocks when CPU is snooped. Because setting XSTATE to 0
+ * overrides any other XSTATE action, the code will always
+ * stall for 4 GeodeLink clocks after a snoop request goes
+ * away even if it occured a clock or two later than a
+ * different snoop; the stall signal will never 'glitch high'
+ * for only one or two CPU clocks with this code.
+ */
+
+ /* Send mb0 port 3 requests to upper GeodeLink diag bits
+ [63:32] */
+ msr.hi = 0;
+ msr.lo = 0x80338041;
+ wrmsr(MSR_GLIU0 + 0x2005, msr);
+
+ /* set5m watches request ready from mb0 to CPU (snoop) */
+ msr.hi = 0x5ad68000;
+ msr.lo = 0;
+ wrmsr(MSR_GLCP + 0x0045, msr);
+
+ /* SET4M will be high when state is idle (XSTATE=11) */
+ msr.hi = 0;
+ msr.lo = 0x0140;
+ wrmsr(MSR_GLCP + 0x0044, msr);
+
+ /* SET5n to watch for processor stalled state */
+ msr.hi = 0x2000;
+ msr.lo = 0;
+ wrmsr(MSR_GLCP + 0x004D, msr);
+
+ /* Writing action number 13: XSTATE=0 to occur when CPU is
+ snooped unless we're stalled */
+ msr.hi = 0;
+ msr.lo = 0x00400000;
+ wrmsr(MSR_GLCP + 0x0075, msr);
+
+ /* Writing action number 11: inc XSTATE every GeodeLink clock
+ unless we're idle */
+ msr.hi = 0;
+ msr.lo = 0x30000;
+ wrmsr(MSR_GLCP + 0x0073, msr);
+
+ /* Writing action number 5: STALL_CPU_PIPE when exitting idle
+ state or not in idle state */
+ msr.hi = 0;
+ msr.lo = 0x00430000;
+ wrmsr(MSR_GLCP + 0x006D, msr);
+
+ /* Writing DIAGCTL Register to enable the stall action and to
+ let set5m watch the upper GeodeLink diag bits. */
+ msr.hi = 0;
+ msr.lo = 0x80004000;
+ wrmsr(MSR_GLCP + 0x005f, msr);
+ }
}
-void bug118253(void){
+void bug118253(void)
+{
+ /* GLPCI PIO Post Control shouldn't be enabled */
msr_t msr;
msr = rdmsr(GLPCI_SPARE);
wrmsr(GLPCI_SPARE, msr);
}
-void
-bug118339(void) {
- printk_err("This is OPTIONAL BIOS-ENABLED ... ignore for now\n");
-#if 0
- PROC NEAR PUBLIC
- pushad
-
- mov cx, TOKEN_VGTEAR_118339_SWAPSIF_ENABLE
- NOSTACK bx, GetNVRAMValueBX
- cmp ax, TVALUE_ENABLE
- jne bug118339exit
-
-;Disable enable_actions in DIAGCTL while setting up GLCP
- mov ecx, MSR_GLCP + 005fh
- xor edx, edx
- xor eax, eax
- WRMSR
-
-; SET2M fires if VG pri is odd (3, not 2) and Ystate=0
- mov ecx, MSR_GLCP + 042h
-; mov edx, 2d6b8000h
- mov edx, 596b8000h
- mov eax, 00000a00h
- WRMSR
-
-; SET3M fires if MBUS changed and VG pri is odd
- mov ecx, MSR_GLCP + 043h
- mov edx, 596b8040h
- xor eax, eax
- WRMSR
-
-; Put VG request data on lower diag bus
- mov ecx, MSR_GLIU0 + 2005h
- xor edx, edx
- mov eax, 80338041h
- WRMSR
-
-; Increment Y state if SET3M if true
- mov ecx, MSR_GLCP + 074h
- xor edx, edx
- mov eax, 0000c000h
- WRMSR
-
-; Set up MBUS action to PRI=3 read of MBIU
- mov ecx, MSR_GLCP + 020h
- mov edx, 0000d863h
- mov eax, 20002000h
- WRMSR
-
-; Trigger MBUS action if VG=pri3 and Y=0, this blocks most PCI
- mov ecx, MSR_GLCP + 071h
- xor edx, edx
- mov eax, 00000c00h
- WRMSR
-
-;Writing DIAGCTL
- mov ecx, MSR_GLCP + 005fh
- xor edx, edx
- mov eax, 80004000h
- WRMSR
-
- ; Code to enable FS2 even when BTB and VGTEAR SWAPSiFs are enabled
- ; As per Todd Roberts in PBz1094 and PBz1095
- ; Moved from CPUREG to CPUBUG per Tom Sylla
- mov ecx, 04C000042h ; GLCP SETMCTL Register
- rdmsr
- or edx, 8 ; Bit 35 = MCP_IN
- wrmsr
-
-bug118339exit:
- popad
- ret
-CPUbug118339 ENDP
-#endif
+void bug118339(void)
+{
+ /* per AMD, do this always */
+ msr_t msr = {0,0};
+ int msrnum;
+
+ /* Disable enable_actions in DIAGCTL while setting up GLCP */
+ wrmsr(MSR_GLCP + 0x005f, msr);
+
+ /* SET2M fires if VG pri is odd (3, not 2) and Ystate=0 */
+ msrnum = MSR_GLCP + 0x042;
+ /* msr.hi = 2d6b8000h */;
+ msr.hi = 0x596b8000;
+ msr.lo = 0x00000a00;
+ wrmsr(msrnum, msr);
+
+ /* SET3M fires if MBUS changed and VG pri is odd */
+ msrnum = MSR_GLCP + 0x043;
+ msr.hi = 0x596b8040;
+ msr.lo = 0;
+ wrmsr(msrnum, msr);
+
+ /* Put VG request data on lower diag bus */
+ msrnum = MSR_GLIU0 + 0x2005;
+ msr.hi = 0;
+ msr.lo = 0x80338041;
+ wrmsr(msrnum, msr);
+
+ /* Increment Y state if SET3M if true */
+ msrnum = MSR_GLCP + 0x074;
+ msr.hi = 0;
+ msr.lo = 0x0000c000;
+ wrmsr(msrnum, msr);
+
+ /* Set up MBUS action to PRI=3 read of MBIU */
+ msrnum = MSR_GLCP + 0x020;
+ msr.hi = 0x0000d863;
+ msr.lo = 0x20002000;
+ wrmsr(msrnum, msr);
+
+ /* Trigger MBUS action if VG=pri3 and Y=0, this blocks most PCI */
+ msrnum = MSR_GLCP + 0x071;
+ msr.hi = 0;
+ msr.lo = 0x00000c00;
+ wrmsr(msrnum, msr);
+
+ /* Writing DIAGCTL */
+ msrnum = MSR_GLCP + 0x005f;
+ msr.hi = 0;
+ msr.lo = 0x80004000;
+ wrmsr(msrnum, msr);
+
+ /* Code to enable FS2 even when BTB and VGTEAR SWAPSiFs are enabled */
+ /* As per Todd Roberts in PBz1094 and PBz1095 */
+ /* Moved from CPUREG to CPUBUG per Tom Sylla */
+ msrnum = 0x04C000042; /* GLCP SETMCTL Register */;
+ msr = rdmsr(msrnum);
+ msr.hi |= 8; /* Bit 35 = MCP_IN */
+ wrmsr(msrnum, msr);
}
/** Modified:*/
/***/
/****************************************************************************/
-void
-disablememoryreadorder(void) {
+void disablememoryreadorder(void)
+{
msr_t msr;
msr = rdmsr(MC_CF8F_DATA);
msr.hi |= CF8F_UPPER_REORDER_DIS_SET;
wrmsr(MC_CF8F_DATA, msr);
}
+
void
-cpubug(void){
+cpubug(void)
+{
msr_t msr;
int rev;
rev = msr.lo & 0xff;
if (rev < 0x20) {
- printk_err("%s: rev < 0x20! bailing!\n");
+ printk(BIOS_ERR, "%s: rev < 0x20! bailing!\n");
return;
}
- printk_debug("Doing cpubug fixes for rev 0x%x\n", rev);
+ printk(BIOS_DEBUG, "Doing cpubug fixes for rev 0x%x\n", rev);
switch(rev)
{
case 0x20:
case 0x30:
break;
default:
- printk_err("unknown rev %x, bailing\n", rev);
+ printk(BIOS_ERR, "unknown rev %x, bailing\n", rev);
return;
}
bug784();
bug118253();
disablememoryreadorder();
- printk_debug("Done cpubug fixes \n");
+ printk(BIOS_DEBUG, "Done cpubug fixes \n");
}
projects / coreboot.git / blobdiff