// Screen writes are also sent to debug ports.
#define CONFIG_SCREEN_AND_DEBUG 1
+// Support running hardware initialization in parallel
+#define CONFIG_THREADS 1
+// Allow hardware init to run in parallel with optionrom execution
+#define CONFIG_THREAD_OPTIONROMS 0
// Support int13 disk/floppy drive functions
#define CONFIG_DRIVES 1
// Support floppy drive access
// Support USB UHCI controllers
#define CONFIG_USB_UHCI 1
// Support USB OHCI controllers
-#define CONFIG_USB_OHCI 0
+#define CONFIG_USB_OHCI 1
+// Support USB EHCI controllers
+#define CONFIG_USB_EHCI 1
+// Support USB disks
+#define CONFIG_USB_MSC 1
+// Support USB hubs
+#define CONFIG_USB_HUB 1
// Support USB keyboards
#define CONFIG_USB_KEYBOARD 1
+// Support USB mice
+#define CONFIG_USB_MOUSE 1
+// Support PS2 ports (keyboard and mouse)
+#define CONFIG_PS2PORT 1
// Support for IDE disk code
#define CONFIG_ATA 1
+// Detect and try to use ATA bus mastering DMA controllers.
+#define CONFIG_ATA_DMA 0
// Use 32bit PIO accesses on ATA (minor optimization on PCI transfers)
#define CONFIG_ATA_PIO32 0
// Support for booting from a CD
// Disable A20 on 16bit boot
#define CONFIG_DISABLE_A20 0
// Support for int15c2 mouse calls
-#define CONFIG_PS2_MOUSE 1
+#define CONFIG_MOUSE 1
// If the target machine has multiple independent root buses, the
// extra buses may be specified here.
#define CONFIG_PCI_ROOT1 0x00
#define CONFIG_PCI_ROOT2 0x00
// Support searching coreboot flash format.
-#define CONFIG_COREBOOT_FLASH 0
+#define CONFIG_COREBOOT_FLASH 1
// Support floppy images in the coreboot flash.
#define CONFIG_FLASH_FLOPPY 1
// Support the lzma decompression algorighm.
// Support finding and running option roms during post.
#define CONFIG_OPTIONROMS 1
// Set if option roms are already copied to 0xc0000-0xf0000
-#define CONFIG_OPTIONROMS_DEPLOYED 1
+#define CONFIG_OPTIONROMS_DEPLOYED 0
// When option roms are not pre-deployed, SeaBIOS can copy an optionrom
// from flash for up to 2 devices.
#define OPTIONROM_VENDEV_1 0x00000000
#define CONFIG_USE_SMM 1
// Maximum number of map entries in the e820 map
#define CONFIG_MAX_E820 32
-// Space to reserve in f-segment for run-time built bios tables.
+// Space to reserve in f-segment for dynamic allocations
#define CONFIG_MAX_BIOSTABLE 2048
// Space to reserve in high-memory for tables
#define CONFIG_MAX_HIGHTABLE (64*1024)
-
-// Maximum number of ATA controllers to support
-#define CONFIG_MAX_ATA_INTERFACES 4
-// Maximum number of internal drives supported
-#define CONFIG_MAX_DRIVES 8
// Largest supported externaly facing drive id
#define CONFIG_MAX_EXTDRIVE 16
#define CONFIG_SUBMODEL_ID 0x00
#define CONFIG_BIOS_REVISION 0x01
+// Support boot from virtio storage
+#define CONFIG_VIRTIO_BLK 1
+
// Various memory addresses used by the code.
-#define BUILD_STACK_ADDR 0x7c00
+#define BUILD_STACK_ADDR 0x7000
#define BUILD_S3RESUME_STACK_ADDR 0x1000
#define BUILD_AP_BOOT_ADDR 0x10000
#define BUILD_EBDA_MINIMUM 0x90000
#define BUILD_BIOS_SIZE 0x10000
// 32KB for shadow ram copying (works around emulator deficiencies)
#define BUILD_BIOS_TMP_ADDR 0x30000
+#define BUILD_MAX_HIGHMEM 0xe0000000
+#define BUILD_PCIMEM_START 0xf0000000
#define BUILD_APIC_ADDR 0xfee00000
#define BUILD_IOAPIC_ADDR 0xfec00000
#define DEBUG_ISR_09 9
#define DEBUG_ISR_0e 9
#define DEBUG_HDL_10 20
-#define DEBUG_HDL_11 1
-#define DEBUG_HDL_12 1
+#define DEBUG_HDL_11 2
+#define DEBUG_HDL_12 2
#define DEBUG_HDL_13 10
-#define DEBUG_HDL_14 1
+#define DEBUG_HDL_14 2
#define DEBUG_HDL_15 9
#define DEBUG_HDL_16 9
-#define DEBUG_HDL_17 1
+#define DEBUG_HDL_17 2
#define DEBUG_HDL_18 1
#define DEBUG_HDL_19 1
#define DEBUG_HDL_1a 9
#define DEBUG_ISR_hwpic2 5
#define DEBUG_HDL_pnp 1
#define DEBUG_HDL_pmm 1
+#define DEBUG_HDL_pcibios32 9
+#define DEBUG_HDL_apm 9
+
+#define DEBUG_unimplemented 2
+#define DEBUG_invalid 3
+#define DEBUG_thread 2
#endif // config.h
projects / seabios.git / blobdiff