#ifndef __CONFIG_H
#define __CONFIG_H
-// Configuration definitions.
-#define CONFIG_FLOPPY_SUPPORT 1
-#define CONFIG_PS2_MOUSE 1
-#define CONFIG_ATA 1
-#define CONFIG_KBD_CALL_INT15_4F 1
-#define CONFIG_CDROM_BOOT 1
-#define CONFIG_CDROM_EMU 1
-#define CONFIG_PCIBIOS 1
+#include "autoconf.h"
-#define CONFIG_MAX_ATA_INTERFACES 4
-#define CONFIG_MAX_ATA_DEVICES (CONFIG_MAX_ATA_INTERFACES*2)
+// Configuration definitions.
-#define CONFIG_STACK_SEGMENT 0x00
-#define CONFIG_STACK_OFFSET 0xfffe
+//#define CONFIG_APPNAME "QEMU"
+//#define CONFIG_CPUNAME8 "QEMUCPU "
+//#define CONFIG_APPNAME6 "QEMU "
+//#define CONFIG_APPNAME4 "QEMU"
+#define CONFIG_APPNAME "Bochs"
+#define CONFIG_CPUNAME8 "BOCHSCPU"
+#define CONFIG_APPNAME6 "BOCHS "
+#define CONFIG_APPNAME4 "BXPC"
-#define CONFIG_ACPI_DATA_SIZE 0x00010000L
+// Maximum number of map entries in the e820 map
+#define CONFIG_MAX_E820 32
+// Space to reserve in f-segment for dynamic allocations
+#define CONFIG_MAX_BIOSTABLE 2048
+// Space to reserve in high-memory for tables
+#define CONFIG_MAX_HIGHTABLE (64*1024)
+// Largest supported externaly facing drive id
+#define CONFIG_MAX_EXTDRIVE 16
#define CONFIG_MODEL_ID 0xFC
#define CONFIG_SUBMODEL_ID 0x00
#define CONFIG_BIOS_REVISION 0x01
+// Various memory addresses used by the code.
+#define BUILD_STACK_ADDR 0x7000
+#define BUILD_S3RESUME_STACK_ADDR 0x1000
+#define BUILD_AP_BOOT_ADDR 0x10000
+#define BUILD_EBDA_MINIMUM 0x90000
+#define BUILD_LOWRAM_END 0xa0000
+#define BUILD_ROM_START 0xc0000
+#define BUILD_BIOS_ADDR 0xf0000
+#define BUILD_BIOS_SIZE 0x10000
+// 32KB for shadow ram copying (works around emulator deficiencies)
+#define BUILD_BIOS_TMP_ADDR 0x30000
+#define BUILD_MAX_HIGHMEM 0xe0000000
+
+#define BUILD_PCIMEM_START 0xf0000000
+#define BUILD_PCIMEM_SIZE (BUILD_PCIMEM_END - BUILD_PCIMEM_START)
+#define BUILD_PCIMEM_END 0xfec00000 /* IOAPIC is mapped at */
+
+#define BUILD_APIC_ADDR 0xfee00000
+#define BUILD_IOAPIC_ADDR 0xfec00000
+
+#define BUILD_SMM_INIT_ADDR 0x38000
+#define BUILD_SMM_ADDR 0xa8000
+#define BUILD_SMM_SIZE 0x8000
+
+// Important real-mode segments
+#define SEG_IVT 0x0000
+#define SEG_BDA 0x0040
+#define SEG_BIOS 0xf000
+
+// Segment definitions in protected mode (see rombios32_gdt in misc.c)
+#define SEG32_MODE32_CS (1 << 3)
+#define SEG32_MODE32_DS (2 << 3)
+#define SEG32_MODE16_CS (3 << 3)
+#define SEG32_MODE16_DS (4 << 3)
+#define SEG32_MODE16BIG_CS (5 << 3)
+#define SEG32_MODE16BIG_DS (6 << 3)
+
+// Debugging levels. If non-zero and CONFIG_DEBUG_LEVEL is greater
+// than the specified value, then the corresponding irq handler will
+// report every enter event.
+#define DEBUG_ISR_02 1
+#define DEBUG_HDL_05 1
+#define DEBUG_ISR_08 20
+#define DEBUG_ISR_09 9
+#define DEBUG_ISR_0e 9
+#define DEBUG_HDL_10 20
+#define DEBUG_HDL_11 2
+#define DEBUG_HDL_12 2
+#define DEBUG_HDL_13 10
+#define DEBUG_HDL_14 2
+#define DEBUG_HDL_15 9
+#define DEBUG_HDL_16 9
+#define DEBUG_HDL_17 2
+#define DEBUG_HDL_18 1
+#define DEBUG_HDL_19 1
+#define DEBUG_HDL_1a 9
+#define DEBUG_HDL_40 1
+#define DEBUG_ISR_70 9
+#define DEBUG_ISR_74 9
+#define DEBUG_ISR_75 1
+#define DEBUG_ISR_76 10
+#define DEBUG_ISR_hwpic1 5
+#define DEBUG_ISR_hwpic2 5
+#define DEBUG_HDL_pnp 1
+#define DEBUG_HDL_pmm 1
+#define DEBUG_HDL_pcibios32 9
+#define DEBUG_HDL_apm 9
+
+#define DEBUG_unimplemented 2
+#define DEBUG_invalid 3
+#define DEBUG_thread 2
+
#endif // config.h
projects / seabios.git / blobdiff