#define CONFIG_APPNAME6 "BOCHS "
#define CONFIG_APPNAME4 "BXPC"
-// Configure for use with KVM.
-#define CONFIG_KVM 0
// Configure as a coreboot payload.
#define CONFIG_COREBOOT 0
// Control how verbose debug output is.
#define CONFIG_DEBUG_LEVEL 1
-
// Send debugging information to serial port
#define CONFIG_DEBUG_SERIAL 0
-
-// Support for int13 floppy drive access
-#define CONFIG_FLOPPY_SUPPORT 1
+// Screen writes are also sent to debug ports.
+#define CONFIG_SCREEN_AND_DEBUG 1
+
+// Support running hardware initialization in parallel
+#define CONFIG_THREADS 1
+// Support int13 disk/floppy drive functions
+#define CONFIG_DRIVES 1
+// Support floppy drive access
+#define CONFIG_FLOPPY 1
+// Support USB devices
+#define CONFIG_USB 1
+// Support USB UHCI controllers
+#define CONFIG_USB_UHCI 1
+// Support USB OHCI controllers
+#define CONFIG_USB_OHCI 1
+// Support USB keyboards
+#define CONFIG_USB_KEYBOARD 1
// Support for IDE disk code
#define CONFIG_ATA 1
// Use 32bit PIO accesses on ATA (minor optimization on PCI transfers)
#define CONFIG_APMBIOS 1
// Support PnP BIOS entry point.
#define CONFIG_PNPBIOS 1
+// Support Post Memory Manager (PMM) entry point.
+#define CONFIG_PMM 1
// Support int 19/18 system bootup support
#define CONFIG_BOOT 1
// Support an interactive boot menu at end of post.
#define CONFIG_PCI_ROOT2 0x00
// Support searching coreboot flash format.
#define CONFIG_COREBOOT_FLASH 0
+// Support floppy images in the coreboot flash.
+#define CONFIG_FLASH_FLOPPY 1
// Support the lzma decompression algorighm.
#define CONFIG_LZMA 1
// Support finding and running option roms during post.
#define CONFIG_MAX_E820 32
// Space to reserve in f-segment for run-time built bios tables.
#define CONFIG_MAX_BIOSTABLE 2048
+// Space to reserve in high-memory for tables
+#define CONFIG_MAX_HIGHTABLE (64*1024)
+// Maximum number of ATA controllers to support
#define CONFIG_MAX_ATA_INTERFACES 4
-#define CONFIG_MAX_ATA_DEVICES (CONFIG_MAX_ATA_INTERFACES*2)
-
-#define CONFIG_ACPI_DATA_SIZE 0x00010000L
+// Maximum number of internal drives supported
+#define CONFIG_MAX_DRIVES 8
+// Largest supported externaly facing drive id
+#define CONFIG_MAX_EXTDRIVE 16
#define CONFIG_MODEL_ID 0xFC
#define CONFIG_SUBMODEL_ID 0x00
#define CONFIG_BIOS_REVISION 0x01
// Various memory addresses used by the code.
-#define BUILD_STACK_ADDR 0x7c00
+#define BUILD_STACK_ADDR 0x7000
#define BUILD_S3RESUME_STACK_ADDR 0x1000
#define BUILD_AP_BOOT_ADDR 0x10000
+#define BUILD_EBDA_MINIMUM 0x90000
+#define BUILD_LOWRAM_END 0xa0000
+#define BUILD_ROM_START 0xc0000
#define BUILD_BIOS_ADDR 0xf0000
#define BUILD_BIOS_SIZE 0x10000
+// 32KB for shadow ram copying (works around emulator deficiencies)
+#define BUILD_BIOS_TMP_ADDR 0x30000
#define BUILD_APIC_ADDR 0xfee00000
#define BUILD_IOAPIC_ADDR 0xfec00000
#define DEBUG_ISR_hwpic1 5
#define DEBUG_ISR_hwpic2 5
#define DEBUG_HDL_pnp 1
+#define DEBUG_HDL_pmm 1
+#define DEBUG_thread 1
#endif // config.h