op1 : in csigned;
op2 : in csigned;
op3 : out csigned;
+ opM : out csigned;
do_calc : in std_logic;
calc_done : out std_logic;
calc_error : out std_logic
end entity alu;
architecture beh of alu is
- type ALU_STATE is (SIDLE, SADD, SSUB, SMUL, SDIV, SDIV_CALC, SDIV_DONE,
- SDONE, SERROR);
+ type ALU_STATE is (SIDLE, SADD, SSUB, SMUL, SDIV, SDIV_CALC, SDONE, SERROR);
signal state_int, state_next : ALU_STATE;
- signal done_intern, error_intern, div_calc_done, div_go_calc : std_logic;
- signal op3_int, op3_next : csigned := (others => '0');
+ signal op3_int, op3_next, opM_int, opM_next : csigned;
signal calc_done_int, calc_done_next : std_logic;
signal calc_error_int, calc_error_next : std_logic;
-- signale fuer division
- signal dividend_msb_int, dividend_msb_next, laengediv_int, laengediv_next : natural;
+ signal dividend_msb_int, dividend_msb_next, laengediv_int, laengediv_next : divinteger;
signal quo_int, quo_next, aktdiv_int, aktdiv_int_next, op1_int, op1_next, op2_int, op2_next : csigned;
signal sign_int, sign_next : std_logic;
begin
op3 <= op3_int;
+ opM <= opM_int;
calc_done <= calc_done_int;
calc_error <= calc_error_int;
if sys_res_n = '0' then
state_int <= SIDLE;
op3_int <= (others => '0');
+ opM_int <= (others => '0');
calc_done_int <= '0';
calc_error_int <= '0';
--div
- dividend_msb_int <= 0;
- laengediv_int <= 0;
+ dividend_msb_int <= (others => '0');
+ laengediv_int <= (others => '0');
quo_int <= (others => '0');
aktdiv_int <= (others => '0');
op1_int <= (others => '0');
elsif rising_edge(sys_clk) then
state_int <= state_next;
op3_int <= op3_next;
+ opM_int <= opM_next;
calc_done_int <= calc_done_next;
calc_error_int <= calc_error_next;
-- div
end if;
end process;
- -- next state
- process(state_int, opcode, done_intern, error_intern, do_calc,
- div_calc_done, div_go_calc)
- begin
- -- set a default value for next state
- state_next <= state_int;
- -- next state berechnen
- case state_int is
- when SIDLE =>
- if do_calc = '1' then
- case opcode is
- when ALU_ADD =>
- state_next <= SADD;
- when ALU_SUB =>
- state_next <= SSUB;
- when ALU_MUL =>
- state_next <= SMUL;
- when ALU_DIV =>
- state_next <= SDIV;
- when others =>
- state_next <= SIDLE;
- end case;
- end if;
- when SADD | SSUB | SMUL | SDIV_DONE =>
- if done_intern = '1' then
- state_next <= SDONE;
- end if;
- if error_intern = '1' then
- state_next <= SERROR;
- end if;
- when SDIV =>
- if div_go_calc = '1' then
- state_next <= SDIV_CALC;
- end if;
- if error_intern = '1' then
- state_next <= SERROR;
- end if;
- when SDIV_CALC =>
- if div_calc_done = '1' then
- state_next <= SDIV_DONE;
- end if;
- when SDONE | SERROR =>
- if do_calc = '0' then
- state_next <= SIDLE;
+ -- next state & out
+ process(opcode, do_calc, state_int, op1, op2, dividend_msb_int,
+ laengediv_int, quo_int, aktdiv_int, sign_int, op1_int, op2_int,
+ op3_int, opM_int)
+ -- http://www.velocityreviews.com/forums/showpost.php?p=137148&postcount=5
+ function find_msb(a : std_logic_vector) return std_logic_vector is
+ function bits_to_fit(n : positive) return natural is
+ variable nn, bits : natural := 0;
+ begin
+ nn := n;
+ while nn > 0 loop
+ bits := bits + 1;
+ nn := nn/2;
+ end loop;
+ return bits;
+ end;
+
+ function or_all(p : std_logic_vector) return std_logic is
+ variable r : std_logic;
+ begin
+ r := '0';
+ for i in p'range loop
+ r := r or p(i);
+ end loop;
+ return r;
+ end;
+
+ constant wN : positive := bits_to_fit(a'length - 1);
+ constant wP : positive := 2 ** wN;
+ variable pv : std_logic_vector(wP-1 downto 0);
+ variable n : std_logic_vector(wN downto 1);
+ begin
+ if a'length <= 2 then
+ n(n'right) := a(a'left);
+ else
+ pv(a'length-1 downto 0) := a;
+ if or_all(pv(wP-1 downto wP/2)) = '1' then
+ n := '1' & find_msb((pv(wP-1 downto wP/2)));
+ else
+ n := '0' & find_msb((pv(wP/2-1 downto 0)));
end if;
- end case;
- end process;
+ end if;
+ return n;
+ end function find_msb;
+ -- -- alternativ: eleganter, braucht aber mehr logic cells
+ -- for i in (CBITS-1) downto 0 loop
+ -- exit when a(i) = '1';
+ -- r := r+1;
+ -- end loop;
+ -- return (CBITS - r);
- -- output
- process(state_int, op1, op2, dividend_msb_int, laengediv_int, quo_int, aktdiv_int, sign_int, op1_int, op2_int, op3_int)
- variable multmp, multmp2 : signed(((2*CBITS)-1) downto 0);
+ variable multmp : signed(((2*CBITS)-1) downto 0);
variable mulsign : std_logic;
variable tmp : csigned;
-- vars fuer div
- variable laengediv_var, dividend_msb_var : natural;
+ variable laengediv_var, dividend_msb_var, divtmp : divinteger;
variable aktdiv_int_var, quo_var, op1_var, op2_var : csigned;
begin
calc_done_next <= '0';
calc_error_next <= '0';
- div_calc_done <= '0';
- div_go_calc <= '0';
- done_intern <= '0';
- error_intern <= '0';
-- default fuer div
- dividend_msb_next <= 0;
- laengediv_next <= 0;
+ dividend_msb_next <= (others => '0');
+ laengediv_next <= (others => '0');
quo_next <= (others => '0');
- aktdiv_int_next <= (others => '0');
+ aktdiv_int_next <= aktdiv_int;
op1_next <= (others => '0');
op2_next <= (others => '0');
sign_next <= '0';
- op3_next <= (others => '0');
-
+ op3_next <= op3_int;
+ opM_next <= opM_int;
+ -- set a default value for next state
+ state_next <= state_int;
+ -- next state berechnen
case state_int is
when SIDLE =>
- null;
+ aktdiv_int_next <= (others => '0');
+ -- opM_next <= (others => '0');
+
+ if do_calc = '1' then
+ case opcode is
+ when ALU_ADD => state_next <= SADD;
+ when ALU_SUB => state_next <= SSUB;
+ when ALU_MUL => state_next <= SMUL;
+ when ALU_DIV => state_next <= SDIV;
+ when others => state_next <= SIDLE;
+ end case;
+ end if;
when SADD =>
tmp := op1 + op2;
op3_next <= tmp;
+ state_next <= SDONE;
-- over- bzw. underflow?
if (op1(CBITS-1) = op2(CBITS-1)) and (op1(CBITS-1) /= tmp(CBITS -1)) then
- error_intern <= '1';
- else
- done_intern <= '1';
+ state_next <= SERROR;
end if;
when SSUB =>
tmp := op1 - op2;
op3_next <= tmp;
+ state_next <= SDONE;
-- over- bzw. underflow?
if (op1(CBITS-1) /= op2(CBITS-1)) and (op1(CBITS-1) /= tmp(CBITS -1)) then
- error_intern <= '1';
- else
- done_intern <= '1';
+ state_next <= SERROR;
end if;
when SMUL =>
mulsign := op1(CBITS-1) xor op2(CBITS-1);
op3_next(CBITS-1) <= mulsign;
if mulsign = '1' then
- multmp2 := not (multmp + 1);
- else
- multmp2 := multmp;
+ multmp := (not multmp) + 1;
end if;
+ state_next <= SDONE;
-- overflow?
- if(multmp2((2*CBITS)-2 downto (CBITS-1)) > 0) then
- error_intern <= '1';
- else
- done_intern <= '1';
+ if(multmp((2*CBITS)-2 downto (CBITS-1)) > 0) then
+ state_next <= SERROR;
end if;
-
when SDIV =>
-- division implementiert nach ~hwmod/doc/division.pdf
if ((op1 = x"80000000" and op2 = to_signed(-1, CBITS)) or op2 = to_signed(0, CBITS)) then
- error_intern <= '1';
+ state_next <= SERROR;
else
-- sign check
op1_var := op1;
op2_var := op2;
if op1(CBITS-1) = '1' then
- op1_var := not (op1_var + 1);
+ op1_var := (not op1_var) + 1;
end if;
if op2(CBITS-1) = '1' then
- op2_var := not (op2_var + 1);
+ op2_var := (not op2_var) + 1;
end if;
- dividend_msb_var := find_msb(op1_var)-1;
- laengediv_var := find_msb(op2_var)-1;
+ dividend_msb_var := divinteger(find_msb(std_logic_vector(op1_var)))-1;
+ laengediv_var := divinteger(find_msb(std_logic_vector(op2_var)))-1;
- aktdiv_int_next <= op1_var srl (dividend_msb_var - laengediv_var + 1);
+ aktdiv_int_next <= op1_var srl to_integer(dividend_msb_var - laengediv_var + 1);
- div_go_calc <= '1';
- dividend_msb_next <= dividend_msb_var;
- laengediv_next <= laengediv_var;
- quo_next <= (others => '0');
- op1_next <= op1_var;
- op2_next <= op2_var;
- sign_next <= op1(CBITS-1) xor op2(CBITS-1);
+ -- anmerkung: xst (xilinx) kann folgende zeile nicht uebersetzen
+ -- > if op1 = to_signed(-2147483648, CBITS) then
+ -- darum folgende schreibweise ->
+ state_next <= SDONE;
+ if op1 = x"80000000" then
+ -- so ziemlich das boeseste was passieren kann
+ op3_next <= to_signed(-214748364,CBITS);
+ opM_next <= to_signed(8,CBITS);
+ elsif (op1_var < op2_var) then
+ op3_next <= to_signed(0,CBITS);
+ opM_next <= op1_var;
+ else
+ state_next <= SDIV_CALC;
+ dividend_msb_next <= dividend_msb_var;
+ laengediv_next <= laengediv_var;
+ quo_next <= (others => '0');
+ op1_next <= op1_var;
+ op2_next <= op2_var;
+ sign_next <= op1(CBITS-1) xor op2(CBITS-1);
+ end if;
end if;
when SDIV_CALC =>
- if (dividend_msb_int - laengediv_int + 1) > 0 then
+ divtmp := dividend_msb_int - laengediv_int + 1;
+
+ if divtmp > 0 then
aktdiv_int_var := aktdiv_int sll 1;
- aktdiv_int_var(0) := op1_int(dividend_msb_int - laengediv_int);
+ aktdiv_int_var(0) := op1_int(to_integer(divtmp) - 1);
quo_var := quo_int sll 1;
if aktdiv_int_var >= op2_int then
sign_next <= sign_int;
else
if sign_int = '1' then
- quo_next <= (not quo_int) + 1;
+ op3_next <= (not quo_int) + 1;
else
- quo_next <= quo_int;
+ op3_next <= quo_int;
end if;
- div_calc_done <= '1';
+ opM_next <= aktdiv_int;
+ state_next <= SDONE;
end if;
- when SDIV_DONE =>
- op3_next <= quo_int;
- done_intern <= '1';
when SDONE | SERROR =>
calc_done_next <= '1';
- if (state_int = SERROR) then
+ if state_int = SERROR then
calc_error_next <= '1';
end if;
- op3_next <= op3_int;
+ if do_calc = '0' then
+ state_next <= SIDLE;
+ end if;
end case;
end process;
end architecture beh;
-