Various USB Debug Port fixes (trivial).

[coreboot.git] / src / Kconfig

diff --git a/src/Kconfig b/src/Kconfig
index 5c83a0607d87ce3ece8eb93d622f5aca55c8f726..be55b4bf9063b43ad3a68a0075de6a245b9051b5 100644 (file)
--- a/src/Kconfig
+++ b/src/Kconfig
@@ -80,6 +80,24 @@ config CCACHE
          Enables the use of ccache for faster builds.
          Requires ccache in path.
 
+config SCONFIG_GENPARSER
+       bool "Generate SCONFIG parser using flex and bison"
+       default n
+       depends on EXPERT
+       help
+         Enable this option if you are working on the sconfig
+         device tree parser and made changes to sconfig.l and
+         sconfig.y. 
+         Otherwise, say N.
+
+config USE_OPTION_TABLE
+       bool "Use CMOS for configuration values"
+       default n
+       depends on HAVE_OPTION_TABLE
+       help
+         Enable this option if coreboot shall read options from the "CMOS"
+         NVRAM instead of using hard coded values.
+
 endmenu
 
 source src/mainboard/Kconfig
@@ -132,18 +150,6 @@ config HEAP_SIZE
        hex
        default 0x4000
 
-config DEBUG
-       bool
-       default n
-
-config USE_PRINTK_IN_CAR
-       bool
-       default n
-
-config USE_OPTION_TABLE
-       bool "Use CMOS for configuration values"
-       default n
-
 config MAX_CPUS
        int
        default 1
@@ -165,6 +171,10 @@ config HAVE_ACPI_RESUME
        bool
        default n
 
+config HAVE_ACPI_SLIC
+       bool
+       default n
+
 config ACPI_SSDTX_NUM
        int
        default 0
@@ -186,13 +196,17 @@ config HAVE_MAINBOARD_RESOURCES
        bool
        default n
 
+config USE_OPTION_TABLE
+       bool
+       default n
+
 config HAVE_OPTION_TABLE
        bool
-       default y
+       default n
        help
          This variable specifies whether a given board has a cmos.layout
          file containing NVRAM/CMOS bit definitions.
-         It defaults to 'y' but can be changed to 'n' in mainboard/*/Kconfig.
+         It defaults to 'n' but can be selected in mainboard/*/Kconfig.
 
 config PIRQ_ROUTE
        bool
@@ -236,27 +250,6 @@ config GFXUMA
 #
 # endmenu
 
-#TODO Remove this option or make it useful.
-config HAVE_LOW_TABLES
-       bool
-       default y
-       help
-         This Option is unused in the code.  Since two boards try to set it to
-         'n', they may be broken.  We either need to make the option useful or
-         get rid of it.  The broken boards are:
-         asus/m2v-mx_se
-         supermicro/h8dme
-
-config HAVE_HIGH_TABLES
-       bool
-       default y
-       help
-         This variable specifies whether a given northbridge has high table
-         support.
-         It is set in northbridge/*/Kconfig.
-         Whether or not the high tables are actually written by coreboot is
-         configurable by the user via WRITE_HIGH_TABLES.
-
 config HAVE_ACPI_TABLES
        bool
        help
@@ -296,15 +289,10 @@ config GENERATE_PIRQ_TABLE
        bool
        default HAVE_PIRQ_TABLE
 
-config WRITE_HIGH_TABLES
-       bool
-       default HAVE_HIGH_TABLES
-
 menu "System tables"
 
 config WRITE_HIGH_TABLES
        bool "Write 'high' tables to avoid being overwritten in F segment"
-       depends on HAVE_HIGH_TABLES
        default y
 
 config MULTIBOOT
@@ -495,19 +483,13 @@ config GDB_STUB
          If enabled, you will be able to set breakpoints for gdb debugging.
          See src/arch/i386/lib/c_start.S for details.
 
+config HAVE_DEBUG_RAM_SETUP
+       def_bool n
+
 config DEBUG_RAM_SETUP
        bool "Output verbose RAM init debug messages"
        default n
-       depends on (NORTHBRIDGE_AMD_AMDFAM10 \
-                || NORTHBRIDGE_AMD_AMDK8 \
-                || NORTHBRIDGE_VIA_CN700 \
-                || NORTHBRIDGE_VIA_CX700 \
-                || NORTHBRIDGE_VIA_VX800 \
-                || NORTHBRIDGE_INTEL_E7501 \
-                || NORTHBRIDGE_INTEL_I440BX \
-                || NORTHBRIDGE_INTEL_I82810 \
-                || NORTHBRIDGE_INTEL_I82830 \
-                || NORTHBRIDGE_INTEL_I945)
+       depends on HAVE_DEBUG_RAM_SETUP
        help
          This option enables additional RAM init related debug messages.
          It is recommended to enable this when debugging issues on your
@@ -517,15 +499,20 @@ config DEBUG_RAM_SETUP
 
          If unsure, say N.
 
+config DEBUG_PIRQ
+       bool "Check PIRQ table consistency"
+       default n
+       depends on GENERATE_PIRQ_TABLE
+       help
+         If unsure, say N.
+
+config HAVE_DEBUG_SMBUS
+       def_bool n
+
 config DEBUG_SMBUS
        bool "Output verbose SMBus debug messages"
        default n
-       depends on (SOUTHBRIDGE_VIA_VT8237R \
-                || NORTHBRIDGE_VIA_VX800 \
-                || NORTHBRIDGE_VIA_CX700 \
-                || NORTHBRIDGE_AMD_AMDK8 \
-                || NORTHBRIDGE_AMD_AMDFAM10 \
-                || SOUTHBRIDGE_VIA_VT8231)
+       depends on HAVE_DEBUG_SMBUS
        help
          This option enables additional SMBus (and SPD) debug messages.
 
@@ -544,6 +531,29 @@ config DEBUG_SMI
 
          If unsure, say N.
 
+config DEBUG_SMM_RELOCATION
+       bool "Debug SMM relocation code"
+       default n
+       depends on HAVE_SMI_HANDLER
+       help
+         This option enables additional SMM handler relocation related
+         debug messages.
+
+         Note: This option will increase the size of the coreboot image.
+
+         If unsure, say N.
+
+config REALMODE_DEBUG
+       bool "Enable debug messages for option ROM execution"
+       default n
+       depends on PCI_OPTION_ROM_RUN_REALMODE
+       help
+         This option enables additional x86emu related debug messages.
+
+         Note: This option will increase the time to emulate a ROM.
+
+         If unsure, say N.
+
 config X86EMU_DEBUG
        bool "Output verbose x86emu debug messages"
        default n
@@ -706,7 +716,7 @@ config ENABLE_APIC_EXT_ID
 
 config WARNINGS_ARE_ERRORS
        bool
-       default n
+       default y
 
 config ID_SECTION_OFFSET
        hex