Select the prefix to all files put into the image. It's "fallback"
by default, "normal" is a common alternative.
+choice
+ prompt "Compiler"
+ default COMPILER_GCC
+ help
+ This option allows you to select the compiler used for building
+ coreboot.
+
+config COMPILER_GCC
+ bool "GCC"
+config COMPILER_LLVM_CLANG
+ bool "LLVM/clang"
+endchoice
+
+config SCANBUILD_ENABLE
+ bool "Build with scan-build for static analysis"
+ default n
+ help
+ Changes the build process to scan-build is used.
+ Requires scan-build in path.
+
+config SCANBUILD_REPORT_LOCATION
+ string "Directory to put scan-build report in"
+ default ""
+ depends on SCANBUILD_ENABLE
+ help
+ Where the scan-build report should be stored
+
+config CCACHE
+ bool "ccache"
+ default n
+ help
+ Enables the use of ccache for faster builds.
+ Requires ccache in path.
+
+config USE_OPTION_TABLE
+ bool "Use CMOS for configuration values"
+ default n
+ help
+ Enable this option if coreboot shall read options from the "CMOS"
+ NVRAM instead of using hard coded values.
+
endmenu
source src/mainboard/Kconfig
endmenu
+menu "Generic Drivers"
+source src/drivers/Kconfig
+endmenu
+
config PCI_BUS_SEGN_BITS
int
default 0
int
default 36
-config XIP_ROM_BASE
- hex
- default 0xfffe0000
-
-config XIP_ROM_SIZE
- hex
- default 0x20000
-
-config LB_CKS_RANGE_START
- int
- default 49
-
-config LB_CKS_RANGE_END
- int
- default 125
-
-config LB_CKS_LOC
- int
- default 126
-
config LOGICAL_CPUS
bool
default y
hex
default 0x4000
-config DEBUG
- bool
- default n
-
config USE_PRINTK_IN_CAR
bool
default n
-config USE_OPTION_TABLE
- bool
- default n
-
config MAX_CPUS
int
default 1
bool
default n
-config RAMTOP
- hex
- default 0x200000
-
config ATI_RAGE_XL
bool
bool
default n
-config ACPI_SSDTX_NUM
- int
- default 0
-
-config HAVE_FALLBACK_BOOT
- bool
- default y
-
-config USE_FALLBACK_IMAGE
- bool
- default y
-
-config HAVE_FAILOVER_BOOT
+config HAVE_ACPI_SLIC
bool
default n
-config USE_FAILOVER_IMAGE
- bool
- default n
+config ACPI_SSDTX_NUM
+ int
+ default 0
config HAVE_HARD_RESET
bool
This variable specifies whether a given board has a hard_reset
function, no matter if it's provided by board code or chipset code.
-config BOARD_HAS_HARD_RESET
- bool
- default n
- help
- This variable specifies whether a given board has a reset.c
- file containing a hard_reset() function.
-
-config BOARD_HAS_FADT
- bool
- default n
- help
- This variable specifies whether a given board has a board-local
- FADT in fadt.c. Long-term, those should be moved to appropriate
- chipset components (eg. southbridge)
-
-config HAVE_BUS_CONFIG
- bool
- default n
- help
- This variable specifies whether a given board has a get_bus_conf.c
- file containing bus configuration data.
-
config HAVE_INIT_TIMER
bool
default n if UDELAY_IO
the "0x" prefix) and 3230 specifies the PCI device ID of the
video card (also in hex, without "0x" prefix).
+config INTEL_MBI
+ bool "Add an MBI image"
+ depends on NORTHBRIDGE_INTEL_I82830
+ help
+ Select this option if you have an Intel MBI image that you would
+ like to add to your ROM.
+
+ You will be able to specify the location and file name of the
+ image later.
+
+config FALLBACK_MBI_FILE
+ string "Intel MBI path and filename"
+ depends on INTEL_MBI
+ default "mbi.bin"
+ help
+ The path and filename of the file to use as VGA BIOS.
+
+endmenu
+
+menu "Bootsplash"
+ depends on PCI_OPTION_ROM_RUN_YABEL
+
+config BOOTSPLASH
+ prompt "Show graphical bootsplash"
+ bool
+ depends on PCI_OPTION_ROM_RUN_YABEL
+ help
+ This option shows a graphical bootsplash screen. The grapics are
+ loaded from the CBFS file bootsplash.jpg.
+
+config FALLBACK_BOOTSPLASH_FILE
+ string "Bootsplash path and filename"
+ depends on BOOTSPLASH
+ default "bootsplash.jpg"
+ help
+ The path and filename of the file to use as graphical bootsplash
+ screen. The file format has to be jpg.
+
+# TODO: Turn this into a "choice".
+config FRAMEBUFFER_VESA_MODE
+ prompt "VESA framebuffer video mode"
+ hex
+ default 0x117
+ depends on BOOTSPLASH
+ help
+ This option sets the resolution used for the coreboot framebuffer and
+ bootsplash screen. Set to 0x117 for 1024x768x16. A diligent soul will
+ some day make this a "choice".
+
+config COREBOOT_KEEP_FRAMEBUFFER
+ prompt "Keep VESA framebuffer"
+ bool
+ depends on BOOTSPLASH
+ help
+ This option keeps the framebuffer mode set after coreboot finishes
+ execution. If this option is enabled, coreboot will pass a
+ framebuffer entry in its coreboot table and the payload will need a
+ framebuffer driver. If this option is disabled, coreboot will switch
+ back to text mode before handing control to a payload.
+
endmenu
menu "Debugging"
If enabled, you will be able to set breakpoints for gdb debugging.
See src/arch/i386/lib/c_start.S for details.
+config DEBUG_RAM_SETUP
+ bool "Output verbose RAM init debug messages"
+ default n
+ depends on (NORTHBRIDGE_AMD_AMDFAM10 \
+ || NORTHBRIDGE_AMD_AMDK8 \
+ || NORTHBRIDGE_VIA_CN700 \
+ || NORTHBRIDGE_VIA_CX700 \
+ || NORTHBRIDGE_VIA_VX800 \
+ || NORTHBRIDGE_INTEL_E7501 \
+ || NORTHBRIDGE_INTEL_I440BX \
+ || NORTHBRIDGE_INTEL_I82810 \
+ || NORTHBRIDGE_INTEL_I82830 \
+ || NORTHBRIDGE_INTEL_I945)
+ help
+ This option enables additional RAM init related debug messages.
+ It is recommended to enable this when debugging issues on your
+ board which might be RAM init related.
+
+ Note: This option will increase the size of the coreboot image.
+
+ If unsure, say N.
+
+config DEBUG_PIRQ
+ bool "Check PIRQ table consistency"
+ default n
+ depends on GENERATE_PIRQ_TABLE
+ help
+ If unsure, say N.
+
+config DEBUG_SMBUS
+ bool "Output verbose SMBus debug messages"
+ default n
+ depends on (SOUTHBRIDGE_VIA_VT8237R \
+ || NORTHBRIDGE_VIA_VX800 \
+ || NORTHBRIDGE_VIA_CX700 \
+ || NORTHBRIDGE_AMD_AMDK8 \
+ || NORTHBRIDGE_AMD_AMDFAM10 \
+ || BOARD_LIPPERT_SPACERUNNER_LX \
+ || SOUTHBRIDGE_VIA_VT8231)
+ help
+ This option enables additional SMBus (and SPD) debug messages.
+
+ Note: This option will increase the size of the coreboot image.
+
+ If unsure, say N.
+
+config DEBUG_SMI
+ bool "Output verbose SMI debug messages"
+ default n
+ depends on HAVE_SMI_HANDLER
+ help
+ This option enables additional SMI related debug messages.
+
+ Note: This option will increase the size of the coreboot image.
+
+ If unsure, say N.
+
+config X86EMU_DEBUG
+ bool "Output verbose x86emu debug messages"
+ default n
+ depends on PCI_OPTION_ROM_RUN_YABEL
+ help
+ This option enables additional x86emu related debug messages.
+
+ Note: This option will increase the size of the coreboot image.
+
+ If unsure, say N.
+
+config X86EMU_DEBUG_JMP
+ bool "Trace JMP/RETF"
+ default n
+ depends on X86EMU_DEBUG
+ help
+ Print information about JMP and RETF opcodes from x86emu.
+
+ Note: This option will increase the size of the coreboot image.
+
+ If unsure, say N.
+
+config X86EMU_DEBUG_TRACE
+ bool "Trace all opcodes"
+ default n
+ depends on X86EMU_DEBUG
+ help
+ Print _all_ opcodes that are executed by x86emu.
+
+ WARNING: This will produce a LOT of output and take a long time.
+
+ Note: This option will increase the size of the coreboot image.
+
+ If unsure, say N.
+
+config X86EMU_DEBUG_PNP
+ bool "Log Plug&Play accesses"
+ default n
+ depends on X86EMU_DEBUG
+ help
+ Print Plug And Play accesses made by option ROMs.
+
+ Note: This option will increase the size of the coreboot image.
+
+ If unsure, say N.
+
+config X86EMU_DEBUG_DISK
+ bool "Log Disk I/O"
+ default n
+ depends on X86EMU_DEBUG
+ help
+ Print Disk I/O related messages.
+
+ Note: This option will increase the size of the coreboot image.
+
+ If unsure, say N.
+
+config X86EMU_DEBUG_PMM
+ bool "Log PMM"
+ default n
+ depends on X86EMU_DEBUG
+ help
+ Print messages related to POST Memory Manager (PMM).
+
+ Note: This option will increase the size of the coreboot image.
+
+ If unsure, say N.
+
+
+config X86EMU_DEBUG_VBE
+ bool "Debug VESA BIOS Extensions"
+ default n
+ depends on X86EMU_DEBUG
+ help
+ Print messages related to VESA BIOS Extension (VBE) functions.
+
+ Note: This option will increase the size of the coreboot image.
+
+ If unsure, say N.
+
+config X86EMU_DEBUG_INT10
+ bool "Redirect INT10 output to console"
+ default n
+ depends on X86EMU_DEBUG
+ help
+ Let INT10 (i.e. character output) calls print messages to debug output.
+
+ Note: This option will increase the size of the coreboot image.
+
+ If unsure, say N.
+
+config X86EMU_DEBUG_INTERRUPTS
+ bool "Log intXX calls"
+ default n
+ depends on X86EMU_DEBUG
+ help
+ Print messages related to interrupt handling.
+
+ Note: This option will increase the size of the coreboot image.
+
+ If unsure, say N.
+
+config X86EMU_DEBUG_CHECK_VMEM_ACCESS
+ bool "Log special memory accesses"
+ default n
+ depends on X86EMU_DEBUG
+ help
+ Print messages related to accesses to certain areas of the virtual
+ memory (e.g. BDA (BIOS Data Area) or interrupt vectors)
+
+ Note: This option will increase the size of the coreboot image.
+
+ If unsure, say N.
+
+config X86EMU_DEBUG_MEM
+ bool "Log all memory accesses"
+ default n
+ depends on X86EMU_DEBUG
+ help
+ Print memory accesses made by option ROM.
+ Note: This also includes accesses to fetch instructions.
+
+ Note: This option will increase the size of the coreboot image.
+
+ If unsure, say N.
+
+config X86EMU_DEBUG_IO
+ bool "Log IO accesses"
+ default n
+ depends on X86EMU_DEBUG
+ help
+ Print I/O accesses made by option ROM.
+
+ Note: This option will increase the size of the coreboot image.
+
+ If unsure, say N.
+
+config LLSHELL
+ bool "Built-in low-level shell"
+ default n
+ help
+ If enabled, you will have a low level shell to examine your machine.
+ Put llshell() in your (romstage) code to start the shell.
+ See src/arch/i386/llshell/llshell.inc for details.
+
endmenu
config LIFT_BSP_APIC_ID
bool
default n
-config USE_INIT
- bool
- default n
-
config ENABLE_APIC_EXT_ID
bool
default n
config ID_SECTION_OFFSET
hex
default 0x10
+
+source src/Kconfig.deprecated_options
projects / coreboot.git / blobdiff