help
Where the scan-build report should be stored
+config CCACHE
+ bool "ccache"
+ default n
+ help
+ Enables the use of ccache for faster builds.
+ Requires ccache in path.
+
endmenu
source src/mainboard/Kconfig
comment "CPU"
source src/cpu/Kconfig
comment "Northbridge"
-
-menu "HyperTransport setup"
- depends on (NORTHBRIDGE_AMD_AMDK8 || NORTHBRIDGE_AMD_AMDFAM10) && EXPERT
-
-choice
- prompt "HyperTransport frequency"
- default LIMIT_HT_SPEED_AUTO
- help
- This option sets the maximum permissible HyperTransport link
- frequency.
-
- Use of this option will only limit the autodetected HT frequency.
- It will not (and cannot) increase the frequency beyond the
- autodetected limits.
-
- This is primarily used to work around poorly designed or laid out
- HT traces on certain motherboards.
-
-config LIMIT_HT_SPEED_200
- bool "Limit HT frequency to 200MHz"
-config LIMIT_HT_SPEED_400
- bool "Limit HT frequency to 400MHz"
-config LIMIT_HT_SPEED_600
- bool "Limit HT frequency to 600MHz"
-config LIMIT_HT_SPEED_800
- bool "Limit HT frequency to 800MHz"
-config LIMIT_HT_SPEED_1000
- bool "Limit HT frequency to 1.0GHz"
-config LIMIT_HT_SPEED_1200
- bool "Limit HT frequency to 1.2GHz"
-config LIMIT_HT_SPEED_1400
- bool "Limit HT frequency to 1.4GHz"
-config LIMIT_HT_SPEED_1600
- bool "Limit HT frequency to 1.6GHz"
-config LIMIT_HT_SPEED_1800
- bool "Limit HT frequency to 1.8GHz"
-config LIMIT_HT_SPEED_2000
- bool "Limit HT frequency to 2.0GHz"
-config LIMIT_HT_SPEED_2200
- bool "Limit HT frequency to 2.2GHz"
-config LIMIT_HT_SPEED_2400
- bool "Limit HT frequency to 2.4GHz"
-config LIMIT_HT_SPEED_2600
- bool "Limit HT frequency to 2.6GHz"
-config LIMIT_HT_SPEED_AUTO
- bool "Autodetect HT frequency"
-endchoice
-
-choice
- prompt "HyperTransport downlink width"
- default LIMIT_HT_DOWN_WIDTH_16
- help
- This option sets the maximum permissible HyperTransport
- downlink width.
-
- Use of this option will only limit the autodetected HT width.
- It will not (and cannot) increase the width beyond the autodetected
- limits.
-
- This is primarily used to work around poorly designed or laid out HT
- traces on certain motherboards.
-
-config LIMIT_HT_DOWN_WIDTH_8
- bool "8 bits"
-config LIMIT_HT_DOWN_WIDTH_16
- bool "16 bits"
-endchoice
-
-choice
- prompt "HyperTransport uplink width"
- default LIMIT_HT_UP_WIDTH_16
- help
- This option sets the maximum permissible HyperTransport
- uplink width.
-
- Use of this option will only limit the autodetected HT width.
- It will not (and cannot) increase the width beyond the autodetected
- limits.
-
- This is primarily used to work around poorly designed or laid out HT
- traces on certain motherboards.
-
-config LIMIT_HT_UP_WIDTH_8
- bool "8 bits"
-config LIMIT_HT_UP_WIDTH_16
- bool "16 bits"
-endchoice
-
-endmenu
-
source src/northbridge/Kconfig
comment "Southbridge"
source src/southbridge/Kconfig
int
default 36
-config XIP_ROM_BASE
- hex
- default 0xfffe0000
-
-config XIP_ROM_SIZE
- hex
- default 0x20000
-
-config LB_CKS_RANGE_START
- int
- default 49
-
-config LB_CKS_RANGE_END
- int
- default 125
-
-config LB_CKS_LOC
- int
- default 126
-
config LOGICAL_CPUS
bool
default y
default n
config USE_OPTION_TABLE
- bool
+ bool "Use CMOS for configuration values"
default n
config MAX_CPUS
bool
default n
-config RAMTOP
- hex
- default 0x200000
-
config ATI_RAGE_XL
bool
depends on BOOTSPLASH
default "bootsplash.jpg"
help
- The path and filename of the file to use as graphical bootsplash
- screen. The file format has to be jpg.
+ The path and filename of the file to use as graphical bootsplash
+ screen. The file format has to be jpg.
# TODO: Turn this into a "choice".
config FRAMEBUFFER_VESA_MODE
depends on (SOUTHBRIDGE_VIA_VT8237R \
|| NORTHBRIDGE_VIA_VX800 \
|| NORTHBRIDGE_VIA_CX700 \
- || NORTHBRIDGE_AMD_AMDK8)
+ || NORTHBRIDGE_AMD_AMDK8 \
+ || NORTHBRIDGE_AMD_AMDFAM10 \
+ || SOUTHBRIDGE_VIA_VT8231)
help
This option enables additional SMBus (and SPD) debug messages.
depends on X86EMU_DEBUG
help
Print _all_ opcodes that are executed by x86emu.
-
+
WARNING: This will produce a LOT of output and take a long time.
Note: This option will increase the size of the coreboot image.
bool
default n
-config USE_INIT
- bool
- default n
-
config ENABLE_APIC_EXT_ID
bool
default n