[TestFixture]
public class TimeZoneTest {
- private CultureInfo oldcult;
-
- public TimeZoneTest() {}
-
- [SetUp]
- protected void SetUp ()
- {
- oldcult = Thread.CurrentThread.CurrentCulture;
- Thread.CurrentThread.CurrentCulture = new CultureInfo ("");
- }
-
- [TearDown]
- protected void TearDown ()
- {
- Thread.CurrentThread.CurrentCulture = oldcult;
- }
-
private void CET (TimeZone t1)
{
Assert.AreEqual("CET", t1.StandardName, "A01");
Assert.AreEqual(0L, t1.GetUtcOffset (d5).Ticks, "D14");
}
+ private void NZST(TimeZone t1) {
+ Assert.AreEqual("NZST", t1.StandardName, "E01");
+ Assert.AreEqual("NZDT", t1.DaylightName, "E02");
+
+ DaylightTime d1 = t1.GetDaylightChanges (2013);
+ Assert.AreEqual("09/29/2013 02:00:00", d1.Start.ToString ("G"), "E03");
+ Assert.AreEqual("04/07/2013 03:00:00", d1.End.ToString ("G"), "E04");
+ Assert.AreEqual(36000000000L, d1.Delta.Ticks, "E05");
+
+ DaylightTime d2 = t1.GetDaylightChanges (2001);
+ Assert.AreEqual("10/07/2001 02:00:00", d2.Start.ToString ("G"), "E06");
+ Assert.AreEqual("03/18/2001 03:00:00", d2.End.ToString ("G"), "E07");
+ Assert.AreEqual(36000000000L, d2.Delta.Ticks, "E08");
+
+ DateTime d3 = new DateTime(2013,02,15);
+ Assert.AreEqual(true, t1.IsDaylightSavingTime (d3), "E09");
+ DateTime d4 = new DateTime(2013,04,30);
+ Assert.AreEqual(false, t1.IsDaylightSavingTime (d4), "E10");
+ DateTime d5 = new DateTime(2013,11,03);
+ Assert.AreEqual(true, t1.IsDaylightSavingTime (d5), "E11");
+
+ Assert.AreEqual(36000000000L /*hour*/ * 13L, t1.GetUtcOffset (d3).Ticks, "E12");
+ Assert.AreEqual(36000000000L /*hour*/ * 12L, t1.GetUtcOffset (d4).Ticks, "E13");
+ Assert.AreEqual(36000000000L /*hour*/ * 13L, t1.GetUtcOffset (d5).Ticks, "E14");
+ }
+
[Test]
+ [Culture ("")]
public void TestCtors ()
{
TimeZone t1 = TimeZone.CurrentTimeZone;
case "GMT":
GMT (t1);
break;
+ case "NZST":
+ NZST (t1);
+ break;
default:
NUnit.Framework.Assert.Ignore ("Your time zone (" + t1.StandardName + ") isn't defined in the test case");
break;
}
[Test]
- [Category ("TargetJvmNotWorking")]
public void CurrentTimeZone_SerializationRoundtrip ()
{
TimeZone tz = TimeZone.CurrentTimeZone;
DateTime dst_start_utc = tz.GetDaylightChanges(2007).Start.ToUniversalTime ();
if (dst_start_utc == DateTime.MinValue)
- return;
+ Assert.Ignore ("Couldn't get beginning of daylight saving time in 2007.");
Assert.IsTrue (tz.ToLocalTime (dst_start_utc.Subtract (new TimeSpan (0, 1, 0))) < tz.ToLocalTime (dst_start_utc), "0:1:59 < 0:3:00");
Assert.IsTrue (tz.ToLocalTime (dst_start_utc) < tz.ToLocalTime (dst_start_utc.Add (new TimeSpan (0, 1, 0))), "0:3:00 < 0:3:01");
Assert.IsTrue (tz.ToLocalTime (dst_start_utc.Add (new TimeSpan (0, 1, 0))) < tz.ToLocalTime (dst_start_utc.Add (new TimeSpan (0, 59, 0))), "0:3:01 < 0:3:59");
Assert.IsTrue (tz.ToLocalTime (dst_start_utc.Add (new TimeSpan (0, 59, 0))) < tz.ToLocalTime (dst_start_utc.Add (new TimeSpan (1, 0, 0))), "0:3:59 < 0:4:00");
Assert.IsTrue (tz.ToLocalTime (dst_start_utc.Add (new TimeSpan (1, 0, 0))) < tz.ToLocalTime (dst_start_utc.Add (new TimeSpan (1, 1, 0))), "0:4:00 < 0:4:01");
}
-}
+ [Test]
+ public void GetUtcOffsetAtDSTBoundary ()
+ {
+ /*
+ * Getting a definitive list of timezones which do or don't observe Daylight
+ * Savings is difficult (can't say America's or USA definitively) and lengthy see
+ *
+ * http://en.wikipedia.org/wiki/Daylight_saving_time_by_country
+ *
+ * as a good starting point for a list.
+ *
+ * The following are SOME of the timezones/regions which do support daylight savings.
+ *
+ * Pacific/Auckland
+ * Pacific/Sydney
+ * USA (EST, CST, MST, PST, AKST) note this does not cover all states or regions
+ * Europe/London (GMT)
+ * CET (member states of the European Union)
+ *
+ * This test should work in all the above timezones
+ */
+
+
+ TimeZone tz = TimeZone.CurrentTimeZone;
+ int year = DateTime.Now.Year;
+ DaylightTime daylightChanges = tz.GetDaylightChanges(year);
+ DateTime dst_end = daylightChanges.End;
+
+ if (dst_end == DateTime.MinValue)
+ Assert.Ignore (tz.StandardName + " did not observe daylight saving time during " + year + ".");
+
+ var standardOffset = tz.GetUtcOffset(daylightChanges.Start.AddMinutes(-1));
+
+ Assert.AreEqual(standardOffset, tz.GetUtcOffset (dst_end));
+ Assert.AreEqual(standardOffset, tz.GetUtcOffset (dst_end.Add (daylightChanges.Delta.Negate ().Add (TimeSpan.FromSeconds(1)))));
+ Assert.AreEqual(standardOffset, tz.GetUtcOffset (dst_end.Add(daylightChanges.Delta.Negate ())));
+ Assert.AreNotEqual(standardOffset, tz.GetUtcOffset (dst_end.Add(daylightChanges.Delta.Negate ().Add (TimeSpan.FromSeconds(-1)))));
+ }
+
+
+ [Test]
+ public void StaticProperties ()
+ {
+ Assert.IsNotNull (TimeZoneInfo.Local, "Local");
+ Assert.IsNotNull (TimeZoneInfo.Utc, "Utc");
+ }
+
+ [Test]
+ public void FindSystemTimeZoneById ()
+ {
+ TimeZoneInfo tzi = TimeZoneInfo.FindSystemTimeZoneById ("Canada/Eastern");
+ Assert.AreEqual ("EDT", tzi.DaylightName, "DaylightName");
+ Assert.AreEqual ("EST", tzi.StandardName, "StandardName");
+ Assert.IsTrue (tzi.SupportsDaylightSavingTime, "SupportsDaylightSavingTime");
+ }
+
+#if MOBILE
+ // On device we cannot read the OS file system to look for /etc/localtime
+ // and /usr/share/zoneinfo - so we must initialize the BCL TimeZoneInfo
+ // from NSTimeZoneInfo. The tests here check the code paths between the
+ // two types - if they break then TimeZoneInfo work work at all
+ // ref: http://bugzilla.xamarin.com/show_bug.cgi?id=1790
+
+ bool incomplete_data_on_simulator_only_bug;
+
+ [Test]
+ public void GetSystemTimeZones ()
+ {
+ // if test is executed a second time then it report less than 400 (about 127) items available
+ if (incomplete_data_on_simulator_only_bug)
+ Assert.Ignore ("known to fail on some iOS simulator versions - see source comments");
+
+ try {
+ Assert.That (TimeZoneInfo.GetSystemTimeZones ().Count, Is.GreaterThan (400), "GetSystemTimeZones");
+ } catch (NullReferenceException) {
+ // that's a weird one. It failed on iOS 5.1 *beta* simulator (on Lion) but it worked on *final*
+ // now it fails on Snow Leopard the same way (incomplete data) with iOS5 simulator (OS update ?)
+ // but it *never*ever* failed on devices
+ incomplete_data_on_simulator_only_bug = true;
+#if XAMCORE_2_0
+ if (ObjCRuntime.Runtime.Arch == ObjCRuntime.Arch.SIMULATOR)
+#else
+ if (MonoTouch.ObjCRuntime.Runtime.Arch == MonoTouch.ObjCRuntime.Arch.SIMULATOR)
+#endif
+ Assert.Ignore ("known to fail on some iOS simulator versions - see source comments");
+ }
+ }
+#endif
+ }
}
projects / mono.git / blobdiff