-/* -*- Mode: C++; tab-width: 2; indent-tabs-mode: nil; c-basic-offset: 2 -*- */\r
-/* ***** BEGIN LICENSE BLOCK *****\r
- * Version: MPL 1.1/GPL 2.0/LGPL 2.1\r
- *\r
- * The contents of this file are subject to the Mozilla Public License Version\r
- * 1.1 (the "License"); you may not use this file except in compliance with\r
- * the License. You may obtain a copy of the License at\r
- * http://www.mozilla.org/MPL/\r
- *\r
- * Software distributed under the License is distributed on an "AS IS" basis,\r
- * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License\r
- * for the specific language governing rights and limitations under the\r
- * License.\r
- *\r
- * The Original Code is Mozilla Communicator client code, released\r
- * March 31, 1998.\r
- *\r
- * The Initial Developer of the Original Code is\r
- * Netscape Communications Corporation.\r
- * Portions created by the Initial Developer are Copyright (C) 1998\r
- * the Initial Developer. All Rights Reserved.\r
- *\r
- * Contributor(s):\r
- *\r
- * Alternatively, the contents of this file may be used under the terms of\r
- * either the GNU General Public License Version 2 or later (the "GPL"), or\r
- * the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),\r
- * in which case the provisions of the GPL or the LGPL are applicable instead\r
- * of those above. If you wish to allow use of your version of this file only\r
- * under the terms of either the GPL or the LGPL, and not to allow others to\r
- * use your version of this file under the terms of the MPL, indicate your\r
- * decision by deleting the provisions above and replace them with the notice\r
- * and other provisions required by the GPL or the LGPL. If you do not delete\r
- * the provisions above, a recipient may use your version of this file under\r
- * the terms of any one of the MPL, the GPL or the LGPL.\r
- *\r
- * ***** END LICENSE BLOCK ***** */\r
-/**\r
- File Name: 11.13.2-5.js\r
- ECMA Section: 11.13.2 Compound Assignment: -=\r
- Description:\r
-\r
- *= /= %= -= -= <<= >>= >>>= &= ^= |=\r
-\r
- 11.13.2 Compound assignment ( op= )\r
-\r
- The production AssignmentExpression :\r
- LeftHandSideExpression @ = AssignmentExpression, where @ represents one of\r
- the operators indicated above, is evaluated as follows:\r
-\r
- 1. Evaluate LeftHandSideExpression.\r
- 2. Call GetValue(Result(1)).\r
- 3. Evaluate AssignmentExpression.\r
- 4. Call GetValue(Result(3)).\r
- 5. Apply operator @ to Result(2) and Result(4).\r
- 6. Call PutValue(Result(1), Result(5)).\r
- 7. Return Result(5).\r
-\r
- Author: christine@netscape.com\r
- Date: 12 november 1997\r
-*/\r
-var SECTION = "11.13.2-5";\r
-var VERSION = "ECMA_1";\r
-startTest();\r
-\r
-writeHeaderToLog( SECTION + " Compound Assignment: -=");\r
-\r
-// If either operand is NaN, result is NaN\r
-\r
-new TestCase( SECTION, "VAR1 = NaN; VAR2=1; VAR1 -= VAR2", Number.NaN, eval("VAR1 = Number.NaN; VAR2=1; VAR1 -= VAR2") );\r
-new TestCase( SECTION, "VAR1 = NaN; VAR2=1; VAR1 -= VAR2; VAR1", Number.NaN, eval("VAR1 = Number.NaN; VAR2=1; VAR1 -= VAR2; VAR1") );\r
-new TestCase( SECTION, "VAR1 = NaN; VAR2=0; VAR1 -= VAR2", Number.NaN, eval("VAR1 = Number.NaN; VAR2=0; VAR1 -= VAR2") );\r
-new TestCase( SECTION, "VAR1 = NaN; VAR2=0; VAR1 -= VAR2; VAR1", Number.NaN, eval("VAR1 = Number.NaN; VAR2=0; VAR1 -= VAR2; VAR1") );\r
-new TestCase( SECTION, "VAR1 = 0; VAR2=NaN; VAR1 -= VAR2", Number.NaN, eval("VAR1 = 0; VAR2=Number.NaN; VAR1 -= VAR2") );\r
-new TestCase( SECTION, "VAR1 = 0; VAR2=NaN; VAR1 -= VAR2; VAR1", Number.NaN, eval("VAR1 = 0; VAR2=Number.NaN; VAR1 -= VAR2; VAR1") );\r
-\r
-// the sum of two Infinities the same sign is the infinity of that sign\r
-// the sum of two Infinities of opposite sign is NaN\r
-\r
-new TestCase( SECTION, "VAR1 = Infinity; VAR2= Infinity; VAR1 -= VAR2; VAR1", Number.NaN, eval("VAR1 = Number.POSITIVE_INFINITY; VAR2 = Number.POSITIVE_INFINITY; VAR1 -= VAR2; VAR1") );\r
-new TestCase( SECTION, "VAR1 = Infinity; VAR2= -Infinity; VAR1 -= VAR2; VAR1", Number.POSITIVE_INFINITY, eval("VAR1 = Number.POSITIVE_INFINITY; VAR2 = Number.NEGATIVE_INFINITY; VAR1 -= VAR2; VAR1") );\r
-new TestCase( SECTION, "VAR1 =-Infinity; VAR2= Infinity; VAR1 -= VAR2; VAR1", Number.NEGATIVE_INFINITY, eval("VAR1 = Number.NEGATIVE_INFINITY; VAR2 = Number.POSITIVE_INFINITY; VAR1 -= VAR2; VAR1") );\r
-new TestCase( SECTION, "VAR1 =-Infinity; VAR2=-Infinity; VAR1 -= VAR2; VAR1", Number.NaN, eval("VAR1 = Number.NEGATIVE_INFINITY; VAR2 = Number.NEGATIVE_INFINITY; VAR1 -= VAR2; VAR1") );\r
-\r
-// the sum of an infinity and a finite value is equal to the infinite operand\r
-\r
-new TestCase( SECTION, "VAR1 = 0; VAR2= Infinity; VAR1 -= VAR2;VAR1", Number.NEGATIVE_INFINITY, eval("VAR1 = 0; VAR2 = Number.POSITIVE_INFINITY; VAR1 -= VAR2; VAR1") );\r
-new TestCase( SECTION, "VAR1 = -0; VAR2= Infinity; VAR1 -= VAR2;VAR1", Number.NEGATIVE_INFINITY, eval("VAR1 = -0; VAR2 = Number.POSITIVE_INFINITY; VAR1 -= VAR2; VAR1") );\r
-new TestCase( SECTION, "VAR1 = 0; VAR2= -Infinity; VAR1 -= VAR2;VAR1", Number.POSITIVE_INFINITY, eval("VAR1 = 0; VAR2 = Number.NEGATIVE_INFINITY; VAR1 -= VAR2; VAR1") );\r
-new TestCase( SECTION, "VAR1 = -0; VAR2= -Infinity; VAR1 -= VAR2;VAR1", Number.POSITIVE_INFINITY, eval("VAR1 = -0; VAR2 = Number.NEGATIVE_INFINITY; VAR1 -= VAR2; VAR1") );\r
-\r
-// the sum of two negative zeros is -0. the sum of two positive zeros, or of two zeros of opposite sign, is +0\r
-\r
-new TestCase( SECTION, "VAR1 = 0; VAR2= -0; VAR1 -= VAR2", 0, eval("VAR1 = 0; VAR2 = 0; VAR1 -= VAR2; VAR1") );\r
-new TestCase( SECTION, "VAR1 = 0; VAR2= 0; VAR1 -= VAR2", 0, eval("VAR1 = 0; VAR2 = -0; VAR1 -= VAR2; VAR1") );\r
-new TestCase( SECTION, "VAR1 = -0; VAR2= -0; VAR1 -= VAR2", 0, eval("VAR1 = -0; VAR2 = 0; VAR1 -= VAR2; VAR1") );\r
-new TestCase( SECTION, "VAR1 = -0; VAR2= 0; VAR1 -= VAR2", -0, eval("VAR1 = -0; VAR2 = -0; VAR1 -= VAR2; VAR1") );\r
-\r
-// the sum of a zero and a nonzero finite value is eqal to the nonzero operand\r
-\r
-new TestCase( SECTION, "VAR1 = 0; VAR2= -1; VAR1 -= VAR2; VAR1", 1, eval("VAR1 = 0; VAR2 = -1; VAR1 -= VAR2; VAR1") );\r
-new TestCase( SECTION, "VAR1 = -0; VAR2= -1; VAR1 -= VAR2; VAR1", 1, eval("VAR1 = -0; VAR2 = -1; VAR1 -= VAR2; VAR1") );\r
-new TestCase( SECTION, "VAR1 = -0; VAR2= 1; VAR1 -= VAR2; VAR1", -1, eval("VAR1 = -0; VAR2 = 1; VAR1 -= VAR2; VAR1") );\r
-new TestCase( SECTION, "VAR1 = 0; VAR2= 1; VAR1 -= VAR2; VAR1", -1, eval("VAR1 = 0; VAR2 = 1; VAR1 -= VAR2; VAR1") );\r
-\r
-// the sum of a zero and a nozero finite value is equal to the nonzero operand.\r
-new TestCase( SECTION, "VAR1 = 0; VAR2=-1; VAR1 -= VAR2", 1, eval("VAR1 = 0; VAR2=-1; VAR1 -= VAR2;VAR1") );\r
-new TestCase( SECTION, "VAR1 = 0; VAR2=-1; VAR1 -= VAR2;VAR1", 1, eval("VAR1 = 0; VAR2=-1; VAR1 -= VAR2;VAR1") );\r
-\r
-// the sum of two nonzero finite values of the same magnitude and opposite sign is +0\r
-new TestCase( SECTION, "VAR1 = Number.MAX_VALUE; VAR2= Number.MAX_VALUE; VAR1 -= VAR2; VAR1", 0, eval("VAR1 = Number.MAX_VALUE; VAR2= Number.MAX_VALUE; VAR1 -= VAR2; VAR1") );\r
-new TestCase( SECTION, "VAR1 = Number.MIN_VALUE; VAR2= Number.MIN_VALUE; VAR1 -= VAR2; VAR1", 0, eval("VAR1 = Number.MIN_VALUE; VAR2= Number.MIN_VALUE; VAR1 -= VAR2; VAR1") );\r
-\r
-/*\r
- new TestCase( SECTION, "VAR1 = 10; VAR2 = '0XFF', VAR1 -= VAR2", 2550, eval("VAR1 = 10; VAR2 = '0XFF', VAR1 -= VAR2") );\r
- new TestCase( SECTION, "VAR1 = '0xFF'; VAR2 = 0xA, VAR1 -= VAR2", 2550, eval("VAR1 = '0XFF'; VAR2 = 0XA, VAR1 -= VAR2") );\r
-\r
- new TestCase( SECTION, "VAR1 = '10'; VAR2 = '255', VAR1 -= VAR2", 2550, eval("VAR1 = '10'; VAR2 = '255', VAR1 -= VAR2") );\r
- new TestCase( SECTION, "VAR1 = '10'; VAR2 = '0XFF', VAR1 -= VAR2", 2550, eval("VAR1 = '10'; VAR2 = '0XFF', VAR1 -= VAR2") );\r
- new TestCase( SECTION, "VAR1 = '0xFF'; VAR2 = 0xA, VAR1 -= VAR2", 2550, eval("VAR1 = '0XFF'; VAR2 = 0XA, VAR1 -= VAR2") );\r
-\r
- // boolean cases\r
- new TestCase( SECTION, "VAR1 = true; VAR2 = false; VAR1 -= VAR2", 0, eval("VAR1 = true; VAR2 = false; VAR1 -= VAR2") );\r
- new TestCase( SECTION, "VAR1 = true; VAR2 = true; VAR1 -= VAR2", 1, eval("VAR1 = true; VAR2 = true; VAR1 -= VAR2") );\r
-\r
- // object cases\r
- new TestCase( SECTION, "VAR1 = new Boolean(true); VAR2 = 10; VAR1 -= VAR2;VAR1", 10, eval("VAR1 = new Boolean(true); VAR2 = 10; VAR1 -= VAR2; VAR1") );\r
- new TestCase( SECTION, "VAR1 = new Number(11); VAR2 = 10; VAR1 -= VAR2; VAR1", 110, eval("VAR1 = new Number(11); VAR2 = 10; VAR1 -= VAR2; VAR1") );\r
- new TestCase( SECTION, "VAR1 = new Number(11); VAR2 = new Number(10); VAR1 -= VAR2", 110, eval("VAR1 = new Number(11); VAR2 = new Number(10); VAR1 -= VAR2") );\r
- new TestCase( SECTION, "VAR1 = new String('15'); VAR2 = new String('0xF'); VAR1 -= VAR2", 255, eval("VAR1 = String('15'); VAR2 = new String('0xF'); VAR1 -= VAR2") );\r
-\r
-*/\r
-\r
-test();\r
+/* -*- Mode: C++; tab-width: 2; indent-tabs-mode: nil; c-basic-offset: 2 -*- */
+/* ***** BEGIN LICENSE BLOCK *****
+ * Version: MPL 1.1/GPL 2.0/LGPL 2.1
+ *
+ * The contents of this file are subject to the Mozilla Public License Version
+ * 1.1 (the "License"); you may not use this file except in compliance with
+ * the License. You may obtain a copy of the License at
+ * http://www.mozilla.org/MPL/
+ *
+ * Software distributed under the License is distributed on an "AS IS" basis,
+ * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
+ * for the specific language governing rights and limitations under the
+ * License.
+ *
+ * The Original Code is Mozilla Communicator client code, released
+ * March 31, 1998.
+ *
+ * The Initial Developer of the Original Code is
+ * Netscape Communications Corporation.
+ * Portions created by the Initial Developer are Copyright (C) 1998
+ * the Initial Developer. All Rights Reserved.
+ *
+ * Contributor(s):
+ *
+ * Alternatively, the contents of this file may be used under the terms of
+ * either the GNU General Public License Version 2 or later (the "GPL"), or
+ * the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
+ * in which case the provisions of the GPL or the LGPL are applicable instead
+ * of those above. If you wish to allow use of your version of this file only
+ * under the terms of either the GPL or the LGPL, and not to allow others to
+ * use your version of this file under the terms of the MPL, indicate your
+ * decision by deleting the provisions above and replace them with the notice
+ * and other provisions required by the GPL or the LGPL. If you do not delete
+ * the provisions above, a recipient may use your version of this file under
+ * the terms of any one of the MPL, the GPL or the LGPL.
+ *
+ * ***** END LICENSE BLOCK ***** */
+/**
+ File Name: 11.13.2-5.js
+ ECMA Section: 11.13.2 Compound Assignment: -=
+ Description:
+
+ *= /= %= -= -= <<= >>= >>>= &= ^= |=
+
+ 11.13.2 Compound assignment ( op= )
+
+ The production AssignmentExpression :
+ LeftHandSideExpression @ = AssignmentExpression, where @ represents one of
+ the operators indicated above, is evaluated as follows:
+
+ 1. Evaluate LeftHandSideExpression.
+ 2. Call GetValue(Result(1)).
+ 3. Evaluate AssignmentExpression.
+ 4. Call GetValue(Result(3)).
+ 5. Apply operator @ to Result(2) and Result(4).
+ 6. Call PutValue(Result(1), Result(5)).
+ 7. Return Result(5).
+
+ Author: christine@netscape.com
+ Date: 12 november 1997
+*/
+var SECTION = "11.13.2-5";
+var VERSION = "ECMA_1";
+startTest();
+
+writeHeaderToLog( SECTION + " Compound Assignment: -=");
+
+// If either operand is NaN, result is NaN
+
+new TestCase( SECTION, "VAR1 = NaN; VAR2=1; VAR1 -= VAR2", Number.NaN, eval("VAR1 = Number.NaN; VAR2=1; VAR1 -= VAR2") );
+new TestCase( SECTION, "VAR1 = NaN; VAR2=1; VAR1 -= VAR2; VAR1", Number.NaN, eval("VAR1 = Number.NaN; VAR2=1; VAR1 -= VAR2; VAR1") );
+new TestCase( SECTION, "VAR1 = NaN; VAR2=0; VAR1 -= VAR2", Number.NaN, eval("VAR1 = Number.NaN; VAR2=0; VAR1 -= VAR2") );
+new TestCase( SECTION, "VAR1 = NaN; VAR2=0; VAR1 -= VAR2; VAR1", Number.NaN, eval("VAR1 = Number.NaN; VAR2=0; VAR1 -= VAR2; VAR1") );
+new TestCase( SECTION, "VAR1 = 0; VAR2=NaN; VAR1 -= VAR2", Number.NaN, eval("VAR1 = 0; VAR2=Number.NaN; VAR1 -= VAR2") );
+new TestCase( SECTION, "VAR1 = 0; VAR2=NaN; VAR1 -= VAR2; VAR1", Number.NaN, eval("VAR1 = 0; VAR2=Number.NaN; VAR1 -= VAR2; VAR1") );
+
+// the sum of two Infinities the same sign is the infinity of that sign
+// the sum of two Infinities of opposite sign is NaN
+
+new TestCase( SECTION, "VAR1 = Infinity; VAR2= Infinity; VAR1 -= VAR2; VAR1", Number.NaN, eval("VAR1 = Number.POSITIVE_INFINITY; VAR2 = Number.POSITIVE_INFINITY; VAR1 -= VAR2; VAR1") );
+new TestCase( SECTION, "VAR1 = Infinity; VAR2= -Infinity; VAR1 -= VAR2; VAR1", Number.POSITIVE_INFINITY, eval("VAR1 = Number.POSITIVE_INFINITY; VAR2 = Number.NEGATIVE_INFINITY; VAR1 -= VAR2; VAR1") );
+new TestCase( SECTION, "VAR1 =-Infinity; VAR2= Infinity; VAR1 -= VAR2; VAR1", Number.NEGATIVE_INFINITY, eval("VAR1 = Number.NEGATIVE_INFINITY; VAR2 = Number.POSITIVE_INFINITY; VAR1 -= VAR2; VAR1") );
+new TestCase( SECTION, "VAR1 =-Infinity; VAR2=-Infinity; VAR1 -= VAR2; VAR1", Number.NaN, eval("VAR1 = Number.NEGATIVE_INFINITY; VAR2 = Number.NEGATIVE_INFINITY; VAR1 -= VAR2; VAR1") );
+
+// the sum of an infinity and a finite value is equal to the infinite operand
+
+new TestCase( SECTION, "VAR1 = 0; VAR2= Infinity; VAR1 -= VAR2;VAR1", Number.NEGATIVE_INFINITY, eval("VAR1 = 0; VAR2 = Number.POSITIVE_INFINITY; VAR1 -= VAR2; VAR1") );
+new TestCase( SECTION, "VAR1 = -0; VAR2= Infinity; VAR1 -= VAR2;VAR1", Number.NEGATIVE_INFINITY, eval("VAR1 = -0; VAR2 = Number.POSITIVE_INFINITY; VAR1 -= VAR2; VAR1") );
+new TestCase( SECTION, "VAR1 = 0; VAR2= -Infinity; VAR1 -= VAR2;VAR1", Number.POSITIVE_INFINITY, eval("VAR1 = 0; VAR2 = Number.NEGATIVE_INFINITY; VAR1 -= VAR2; VAR1") );
+new TestCase( SECTION, "VAR1 = -0; VAR2= -Infinity; VAR1 -= VAR2;VAR1", Number.POSITIVE_INFINITY, eval("VAR1 = -0; VAR2 = Number.NEGATIVE_INFINITY; VAR1 -= VAR2; VAR1") );
+
+// the sum of two negative zeros is -0. the sum of two positive zeros, or of two zeros of opposite sign, is +0
+
+new TestCase( SECTION, "VAR1 = 0; VAR2= -0; VAR1 -= VAR2", 0, eval("VAR1 = 0; VAR2 = 0; VAR1 -= VAR2; VAR1") );
+new TestCase( SECTION, "VAR1 = 0; VAR2= 0; VAR1 -= VAR2", 0, eval("VAR1 = 0; VAR2 = -0; VAR1 -= VAR2; VAR1") );
+new TestCase( SECTION, "VAR1 = -0; VAR2= -0; VAR1 -= VAR2", 0, eval("VAR1 = -0; VAR2 = 0; VAR1 -= VAR2; VAR1") );
+new TestCase( SECTION, "VAR1 = -0; VAR2= 0; VAR1 -= VAR2", -0, eval("VAR1 = -0; VAR2 = -0; VAR1 -= VAR2; VAR1") );
+
+// the sum of a zero and a nonzero finite value is eqal to the nonzero operand
+
+new TestCase( SECTION, "VAR1 = 0; VAR2= -1; VAR1 -= VAR2; VAR1", 1, eval("VAR1 = 0; VAR2 = -1; VAR1 -= VAR2; VAR1") );
+new TestCase( SECTION, "VAR1 = -0; VAR2= -1; VAR1 -= VAR2; VAR1", 1, eval("VAR1 = -0; VAR2 = -1; VAR1 -= VAR2; VAR1") );
+new TestCase( SECTION, "VAR1 = -0; VAR2= 1; VAR1 -= VAR2; VAR1", -1, eval("VAR1 = -0; VAR2 = 1; VAR1 -= VAR2; VAR1") );
+new TestCase( SECTION, "VAR1 = 0; VAR2= 1; VAR1 -= VAR2; VAR1", -1, eval("VAR1 = 0; VAR2 = 1; VAR1 -= VAR2; VAR1") );
+
+// the sum of a zero and a nozero finite value is equal to the nonzero operand.
+new TestCase( SECTION, "VAR1 = 0; VAR2=-1; VAR1 -= VAR2", 1, eval("VAR1 = 0; VAR2=-1; VAR1 -= VAR2;VAR1") );
+new TestCase( SECTION, "VAR1 = 0; VAR2=-1; VAR1 -= VAR2;VAR1", 1, eval("VAR1 = 0; VAR2=-1; VAR1 -= VAR2;VAR1") );
+
+// the sum of two nonzero finite values of the same magnitude and opposite sign is +0
+new TestCase( SECTION, "VAR1 = Number.MAX_VALUE; VAR2= Number.MAX_VALUE; VAR1 -= VAR2; VAR1", 0, eval("VAR1 = Number.MAX_VALUE; VAR2= Number.MAX_VALUE; VAR1 -= VAR2; VAR1") );
+new TestCase( SECTION, "VAR1 = Number.MIN_VALUE; VAR2= Number.MIN_VALUE; VAR1 -= VAR2; VAR1", 0, eval("VAR1 = Number.MIN_VALUE; VAR2= Number.MIN_VALUE; VAR1 -= VAR2; VAR1") );
+
+/*
+ new TestCase( SECTION, "VAR1 = 10; VAR2 = '0XFF', VAR1 -= VAR2", 2550, eval("VAR1 = 10; VAR2 = '0XFF', VAR1 -= VAR2") );
+ new TestCase( SECTION, "VAR1 = '0xFF'; VAR2 = 0xA, VAR1 -= VAR2", 2550, eval("VAR1 = '0XFF'; VAR2 = 0XA, VAR1 -= VAR2") );
+
+ new TestCase( SECTION, "VAR1 = '10'; VAR2 = '255', VAR1 -= VAR2", 2550, eval("VAR1 = '10'; VAR2 = '255', VAR1 -= VAR2") );
+ new TestCase( SECTION, "VAR1 = '10'; VAR2 = '0XFF', VAR1 -= VAR2", 2550, eval("VAR1 = '10'; VAR2 = '0XFF', VAR1 -= VAR2") );
+ new TestCase( SECTION, "VAR1 = '0xFF'; VAR2 = 0xA, VAR1 -= VAR2", 2550, eval("VAR1 = '0XFF'; VAR2 = 0XA, VAR1 -= VAR2") );
+
+ // boolean cases
+ new TestCase( SECTION, "VAR1 = true; VAR2 = false; VAR1 -= VAR2", 0, eval("VAR1 = true; VAR2 = false; VAR1 -= VAR2") );
+ new TestCase( SECTION, "VAR1 = true; VAR2 = true; VAR1 -= VAR2", 1, eval("VAR1 = true; VAR2 = true; VAR1 -= VAR2") );
+
+ // object cases
+ new TestCase( SECTION, "VAR1 = new Boolean(true); VAR2 = 10; VAR1 -= VAR2;VAR1", 10, eval("VAR1 = new Boolean(true); VAR2 = 10; VAR1 -= VAR2; VAR1") );
+ new TestCase( SECTION, "VAR1 = new Number(11); VAR2 = 10; VAR1 -= VAR2; VAR1", 110, eval("VAR1 = new Number(11); VAR2 = 10; VAR1 -= VAR2; VAR1") );
+ new TestCase( SECTION, "VAR1 = new Number(11); VAR2 = new Number(10); VAR1 -= VAR2", 110, eval("VAR1 = new Number(11); VAR2 = new Number(10); VAR1 -= VAR2") );
+ new TestCase( SECTION, "VAR1 = new String('15'); VAR2 = new String('0xF'); VAR1 -= VAR2", 255, eval("VAR1 = String('15'); VAR2 = new String('0xF'); VAR1 -= VAR2") );
+
+*/
+
+test();
projects / mono.git / blobdiff