-/* -*- Mode: C++; tab-width: 2; indent-tabs-mode: nil; c-basic-offset: 2 -*- */\r
-/* ***** BEGIN LICENSE BLOCK *****\r
- * Version: MPL 1.1/GPL 2.0/LGPL 2.1\r
- *\r
- * The contents of this file are subject to the Mozilla Public License Version\r
- * 1.1 (the "License"); you may not use this file except in compliance with\r
- * the License. You may obtain a copy of the License at\r
- * http://www.mozilla.org/MPL/\r
- *\r
- * Software distributed under the License is distributed on an "AS IS" basis,\r
- * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License\r
- * for the specific language governing rights and limitations under the\r
- * License.\r
- *\r
- * The Original Code is Mozilla Communicator client code, released\r
- * March 31, 1998.\r
- *\r
- * The Initial Developer of the Original Code is\r
- * Netscape Communications Corporation.\r
- * Portions created by the Initial Developer are Copyright (C) 1998\r
- * the Initial Developer. All Rights Reserved.\r
- *\r
- * Contributor(s):\r
- *\r
- * Alternatively, the contents of this file may be used under the terms of\r
- * either the GNU General Public License Version 2 or later (the "GPL"), or\r
- * the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),\r
- * in which case the provisions of the GPL or the LGPL are applicable instead\r
- * of those above. If you wish to allow use of your version of this file only\r
- * under the terms of either the GPL or the LGPL, and not to allow others to\r
- * use your version of this file under the terms of the MPL, indicate your\r
- * decision by deleting the provisions above and replace them with the notice\r
- * and other provisions required by the GPL or the LGPL. If you do not delete\r
- * the provisions above, a recipient may use your version of this file under\r
- * the terms of any one of the MPL, the GPL or the LGPL.\r
- *\r
- * ***** END LICENSE BLOCK ***** */\r
-\r
-/**\r
- File Name: 10.2.2-2.js\r
- ECMA Section: 10.2.2 Eval Code\r
- Description:\r
-\r
- When control enters an execution context for eval code, the previous\r
- active execution context, referred to as the calling context, is used to\r
- determine the scope chain, the variable object, and the this value. If\r
- there is no calling context, then initializing the scope chain, variable\r
- instantiation, and determination of the this value are performed just as\r
- for global code.\r
-\r
- The scope chain is initialized to contain the same objects, in the same\r
- order, as the calling context's scope chain. This includes objects added\r
- to the calling context's scope chain by WithStatement.\r
-\r
- Variable instantiation is performed using the calling context's variable\r
- object and using empty property attributes.\r
-\r
- The this value is the same as the this value of the calling context.\r
-\r
- Author: christine@netscape.com\r
- Date: 12 november 1997\r
-*/\r
-\r
-var SECTION = "10.2.2-2";\r
-var VERSION = "ECMA_1";\r
-startTest();\r
-var TITLE = "Eval Code";\r
-\r
-writeHeaderToLog( SECTION + " "+ TITLE);\r
-\r
-// Test Objects\r
-\r
-var OBJECT = new MyObject( "hello" );\r
-var GLOBAL_PROPERTIES = new Array();\r
-var i = 0;\r
-\r
-for ( p in this ) {\r
- GLOBAL_PROPERTIES[i++] = p;\r
-}\r
-\r
-with ( OBJECT ) {\r
- var THIS = this;\r
- new TestCase( SECTION, \r
- "eval( 'this == THIS' )", \r
- true, \r
- eval("this == THIS") );\r
- new TestCase( SECTION, \r
- "this in a with() block", \r
- GLOBAL, \r
- this+"" );\r
- new TestCase( SECTION, \r
- "new MyObject('hello').value", \r
- "hello", \r
- value );\r
- new TestCase( SECTION, \r
- "eval(new MyObject('hello').value)", \r
- "hello", \r
- eval("value") );\r
- new TestCase( SECTION, \r
- "new MyObject('hello').getClass()", \r
- "[object Object]", \r
- getClass() );\r
- new TestCase( SECTION, \r
- "eval(new MyObject('hello').getClass())", \r
- "[object Object]", \r
- eval("getClass()") );\r
- new TestCase( SECTION, \r
- "eval(new MyObject('hello').toString())", \r
- "hello", \r
- eval("toString()") );\r
- new TestCase( SECTION, \r
- "eval('getClass') == Object.prototype.toString", \r
- true, \r
- eval("getClass") == Object.prototype.toString );\r
-\r
- for ( i = 0; i < GLOBAL_PROPERTIES.length; i++ ) {\r
- new TestCase( SECTION, GLOBAL_PROPERTIES[i] +\r
- " == THIS["+GLOBAL_PROPERTIES[i]+"]", true,\r
- eval(GLOBAL_PROPERTIES[i]) == eval( "THIS[GLOBAL_PROPERTIES[i]]") );\r
- }\r
-\r
-}\r
-\r
-test();\r
-\r
-function MyObject( value ) {\r
- this.value = value;\r
- this.getClass = Object.prototype.toString;\r
- this.toString = new Function( "return this.value+''" );\r
- return this;\r
-}\r
+/* -*- Mode: C++; tab-width: 2; indent-tabs-mode: nil; c-basic-offset: 2 -*- */
+/* ***** BEGIN LICENSE BLOCK *****
+ * Version: MPL 1.1/GPL 2.0/LGPL 2.1
+ *
+ * The contents of this file are subject to the Mozilla Public License Version
+ * 1.1 (the "License"); you may not use this file except in compliance with
+ * the License. You may obtain a copy of the License at
+ * http://www.mozilla.org/MPL/
+ *
+ * Software distributed under the License is distributed on an "AS IS" basis,
+ * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
+ * for the specific language governing rights and limitations under the
+ * License.
+ *
+ * The Original Code is Mozilla Communicator client code, released
+ * March 31, 1998.
+ *
+ * The Initial Developer of the Original Code is
+ * Netscape Communications Corporation.
+ * Portions created by the Initial Developer are Copyright (C) 1998
+ * the Initial Developer. All Rights Reserved.
+ *
+ * Contributor(s):
+ *
+ * Alternatively, the contents of this file may be used under the terms of
+ * either the GNU General Public License Version 2 or later (the "GPL"), or
+ * the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
+ * in which case the provisions of the GPL or the LGPL are applicable instead
+ * of those above. If you wish to allow use of your version of this file only
+ * under the terms of either the GPL or the LGPL, and not to allow others to
+ * use your version of this file under the terms of the MPL, indicate your
+ * decision by deleting the provisions above and replace them with the notice
+ * and other provisions required by the GPL or the LGPL. If you do not delete
+ * the provisions above, a recipient may use your version of this file under
+ * the terms of any one of the MPL, the GPL or the LGPL.
+ *
+ * ***** END LICENSE BLOCK ***** */
+
+/**
+ File Name: 10.2.2-2.js
+ ECMA Section: 10.2.2 Eval Code
+ Description:
+
+ When control enters an execution context for eval code, the previous
+ active execution context, referred to as the calling context, is used to
+ determine the scope chain, the variable object, and the this value. If
+ there is no calling context, then initializing the scope chain, variable
+ instantiation, and determination of the this value are performed just as
+ for global code.
+
+ The scope chain is initialized to contain the same objects, in the same
+ order, as the calling context's scope chain. This includes objects added
+ to the calling context's scope chain by WithStatement.
+
+ Variable instantiation is performed using the calling context's variable
+ object and using empty property attributes.
+
+ The this value is the same as the this value of the calling context.
+
+ Author: christine@netscape.com
+ Date: 12 november 1997
+*/
+
+var SECTION = "10.2.2-2";
+var VERSION = "ECMA_1";
+startTest();
+var TITLE = "Eval Code";
+
+writeHeaderToLog( SECTION + " "+ TITLE);
+
+// Test Objects
+
+var OBJECT = new MyObject( "hello" );
+var GLOBAL_PROPERTIES = new Array();
+var i = 0;
+
+for ( p in this ) {
+ GLOBAL_PROPERTIES[i++] = p;
+}
+
+with ( OBJECT ) {
+ var THIS = this;
+ new TestCase( SECTION,
+ "eval( 'this == THIS' )",
+ true,
+ eval("this == THIS") );
+ new TestCase( SECTION,
+ "this in a with() block",
+ GLOBAL,
+ this+"" );
+ new TestCase( SECTION,
+ "new MyObject('hello').value",
+ "hello",
+ value );
+ new TestCase( SECTION,
+ "eval(new MyObject('hello').value)",
+ "hello",
+ eval("value") );
+ new TestCase( SECTION,
+ "new MyObject('hello').getClass()",
+ "[object Object]",
+ getClass() );
+ new TestCase( SECTION,
+ "eval(new MyObject('hello').getClass())",
+ "[object Object]",
+ eval("getClass()") );
+ new TestCase( SECTION,
+ "eval(new MyObject('hello').toString())",
+ "hello",
+ eval("toString()") );
+ new TestCase( SECTION,
+ "eval('getClass') == Object.prototype.toString",
+ true,
+ eval("getClass") == Object.prototype.toString );
+
+ for ( i = 0; i < GLOBAL_PROPERTIES.length; i++ ) {
+ new TestCase( SECTION, GLOBAL_PROPERTIES[i] +
+ " == THIS["+GLOBAL_PROPERTIES[i]+"]", true,
+ eval(GLOBAL_PROPERTIES[i]) == eval( "THIS[GLOBAL_PROPERTIES[i]]") );
+ }
+
+}
+
+test();
+
+function MyObject( value ) {
+ this.value = value;
+ this.getClass = Object.prototype.toString;
+ this.toString = new Function( "return this.value+''" );
+ return this;
+}
projects / mono.git / blobdiff