VERSION = 0.93
-USE_MCS_FLAGS = $(LOCAL_MCS_FLAGS) $(PLATFORM_MCS_FLAGS) $(PROFILE_MCS_FLAGS) $(MCS_FLAGS)
-USE_MBAS_FLAGS = $(LOCAL_MBAS_FLAGS) $(PLATFORM_MBAS_FLAGS) $(PROFILE_MBAS_FLAGS) $(MBAS_FLAGS)
+USE_MCS_FLAGS = /codepage:$(CODEPAGE) $(LOCAL_MCS_FLAGS) $(PLATFORM_MCS_FLAGS) $(PROFILE_MCS_FLAGS) $(MCS_FLAGS)
+USE_MBAS_FLAGS = /codepage:$(CODEPAGE) $(LOCAL_MBAS_FLAGS) $(PLATFORM_MBAS_FLAGS) $(PROFILE_MBAS_FLAGS) $(MBAS_FLAGS)
USE_CFLAGS = $(LOCAL_CFLAGS) $(CFLAGS)
CSCOMPILE = $(MCS) $(USE_MCS_FLAGS)
BASCOMPILE = $(MBAS) $(USE_MBAS_FLAGS)
CCOMPILE = $(CC) $(USE_CFLAGS)
BOOT_COMPILE = $(BOOTSTRAP_MCS) $(USE_MCS_FLAGS)
-INSTALL_DATA = $(INSTALL) -m 644
-INSTALL_BIN = $(INSTALL) -m 755
+INSTALL = $(SHELL) $(topdir)/../mono/install-sh
+INSTALL_DATA = $(INSTALL) -c -m 644
+INSTALL_BIN = $(INSTALL) -c -m 755
INSTALL_LIB = $(INSTALL_BIN)
MKINSTALLDIRS = $(SHELL) $(topdir)/mkinstalldirs
-INTERNAL_MCS = $(RUNTIME) $(topdir)/mcs/mcs.exe
-INTERNAL_MBAS = $(RUNTIME) $(topdir)/mbas/mbas.exe
-INTERNAL_GMCS = $(RUNTIME) $(topdir)/gmcs/gmcs.exe
-INTERNAL_ILASM = $(RUNTIME) $(topdir)/ilasm/ilasm.exe
-INTERNAL_RESGEN = $(RUNTIME) $(topdir)/monoresgen/monoresgen.exe
+INTERNAL_MCS = $(RUNTIME) $(RUNTIME_FLAGS) $(topdir)/class/lib/$(PROFILE)/mcs.exe
+INTERNAL_MBAS = $(RUNTIME) $(RUNTIME_FLAGS) $(topdir)/mbas/mbas.exe
+INTERNAL_GMCS = $(RUNTIME) $(RUNTIME_FLAGS) $(topdir)/mcs/gmcs.exe
+INTERNAL_ILASM = $(RUNTIME) $(RUNTIME_FLAGS) $(topdir)/class/lib/$(PROFILE)/ilasm.exe
+INTERNAL_RESGEN = $(RUNTIME) $(RUNTIME_FLAGS) $(topdir)/class/lib/$(BOOTSTRAP_PROFILE)/resgen.exe
corlib = mscorlib.dll
depsdir = $(topdir)/build/deps
-distdir = $(dots)/$(package)/$(thisdir)
# Make sure these propagate if set manually
# Get this so the platform.make platform-check rule doesn't become the
# default target
+.DEFAULT: all
default: all
# Get initial configuration. pre-config is so that the builder can
include $(topdir)/build/profiles/$(PROFILE).make
-include $(topdir)/build/config.make
-# Simple rules
-
-%-recursive:
- @set . $$MAKEFLAGS; \
- case $$2 in *=*) dk="exit 1" ;; *k*) dk=: ;; *) dk="exit 1" ;; esac; \
- list='$(SUBDIRS)'; for d in $$list ; do \
- (cd $$d && $(MAKE) $*) || $$dk ; \
- done
-
-# note: dist-local dep, extra subdirs, $* has become $@
-
-dist-recursive: dist-local
- @list='$(SUBDIRS) $(DIST_ONLY_SUBDIRS)'; for d in $$list ; do \
- (cd $$d && $(MAKE) $@) || exit 1 ; \
- done
-
-# We do this manually to not have a make[1]: blah message (That is,
-# instead of using a '%: %-recursive %-local' construct.)
-#
-# Let the makefile override these for special situations (running checks
-# in the toplevel makefile, or a directory that needs to be built before
-# its subdirectories).
-
-ifndef OVERRIDE_BARE_TARGETS
+ifdef OVERRIDE_TARGET_ALL
+all: all.override
+else
+all: do-all
+endif
-all: all-recursive all-local
+STD_TARGETS = test run-test run-test-ondotnet clean install uninstall
-install: install-recursive install-local
+$(STD_TARGETS): %: do-%
-test: test-recursive test-local
+do-run-test:
+ ok=:; $(MAKE) run-test-recursive || ok=false; $(MAKE) run-test-local || ok=false; $$ok
-run-test: run-test-recursive test-local run-test-local
+do-%: %-recursive
+ $(MAKE) $*-local
-run-test-ondotnet: run-test-ondotnet-recursive test-local run-test-ondotnet-local
+# The way this is set up, any profile-specific subdirs list should
+# be listed _before_ including rules.make. However, the default
+# SUBDIRS list can come after, so don't use the eager := syntax when
+# using the defaults.
+PROFILE_SUBDIRS := $($(PROFILE)_SUBDIRS)
+ifndef PROFILE_SUBDIRS
+PROFILE_SUBDIRS = $(SUBDIRS)
+endif
-clean: clean-recursive clean-local
+ifndef FRAMEWORK_VERSION_MAJOR
+FRAMEWORK_VERSION_MAJOR = $(basename $(FRAMEWORK_VERSION))
+endif
-uninstall: uninstall-recursive uninstall-local
+%-recursive:
+ @set . $$MAKEFLAGS; final_exit=:; \
+ case $$2 in --unix) shift ;; esac; \
+ case $$2 in *=*) dk="exit 1" ;; *k*) dk=: ;; *) dk="exit 1" ;; esac; \
+ list='$(PROFILE_SUBDIRS)'; for d in $$list ; do \
+ (cd $$d && $(MAKE) $*) || { final_exit="exit 1"; $$dk; } ; \
+ done; \
+ $$final_exit
+ifndef DIST_SUBDIRS
+DIST_SUBDIRS = $(SUBDIRS) $(DIST_ONLY_SUBDIRS)
endif
+dist-recursive: dist-local
+ @case '$(distdir)' in [\\/$$]* | ?:[\\/]* ) reldir='$(distdir)' ;; *) reldir='../$(distdir)' ;; esac ; \
+ list='$(DIST_SUBDIRS)'; for d in $$list ; do \
+ (cd $$d && $(MAKE) distdir=$$reldir/$$d $@) || exit 1 ; \
+ done
-# Can only do this from the top dir
-# ## dist: dist-recursive dist-local
-
-# We invert the test here to not end in an error
-# if ChangeLog doesn't exist.
+# The following target can be used like
#
-# Note that we error out if we try to dist a nonexistant
-# file. Seems reasonable to me.
-
+# dist-local: dist-default
+# ... additional commands ...
+#
+# Notes:
+# 1. we invert the test here to not end in an error if ChangeLog doesn't exist.
+# 2. we error out if we try to dist a nonexistant file.
+# 3. we pick up Makefile, makefile, or GNUmakefile.
dist-default:
- -mkdir $(distdir)
+ -mkdir -p $(distdir)
test '!' -f ChangeLog || cp ChangeLog $(distdir)
- for f in Makefile $(DISTFILES) ; do \
+ if test -f Makefile; then m=M; fi; \
+ if test -f makefile; then m=m; fi; \
+ if test -f GNUmakefile; then m=GNUm; fi; \
+ for f in $${m}akefile $(DISTFILES) ; do \
dest=`dirname $(distdir)/$$f` ; \
- $(MKINSTALLDIRS) $$dest && cp $$f $$dest || exit 1 ; \
+ $(MKINSTALLDIRS) $$dest && cp -p $$f $$dest || exit 1 ; \
done
+$(depsdir)/.stamp:
+ $(MKINSTALLDIRS) $(@D)
+ touch $@
+
# Useful
withmcs: