projects
/
summon-arm-toolchain.git
/ blobdiff
commit
grep
author
committer
pickaxe
?
search:
re
summary
|
shortlog
|
log
|
commit
|
commitdiff
|
tree
raw
|
inline
| side by side
compile GMP, MPFR and MPC with GCC
[summon-arm-toolchain.git]
/
summon-arm-toolchain
diff --git
a/summon-arm-toolchain
b/summon-arm-toolchain
index 708869c7383b2fe885edd75cbe71a97ddca97e86..dd5d6ea931dd9bccab5a206000c8b2a3fa7cafa6 100755
(executable)
--- a/
summon-arm-toolchain
+++ b/
summon-arm-toolchain
@@
-1,4
+1,4
@@
-#!/bin/
ba
sh
+#!/bin/sh
# Written by Uwe Hermann <uwe@hermann-uwe.de>, released as public domain.
# Modified by Piotr Esden-Tempski <piotr@esden.net>, released as public domain.
# Written by Uwe Hermann <uwe@hermann-uwe.de>, released as public domain.
# Modified by Piotr Esden-Tempski <piotr@esden.net>, released as public domain.
@@
-13,38
+13,48
@@
set -e
# Settings section
# You probably want to customize those
##############################################################################
# Settings section
# You probably want to customize those
##############################################################################
-TARGET=arm-eabi # Or: TARGET=arm-elf
-PREFIX=${HOME}/arm # Install location of your final toolchain
+TARGET=arm-none-eabi # Or: TARGET=arm-elf
+[ -z $PREFIX ] && PREFIX=${HOME}/arm # Install location of your final toolchain
+[ -z $WORKDIR ] && WORKDIR=$PREFIX/work #temporary directory
PARALLEL= # Or: PARALLEL="-j 5" for 4 CPUs
# Set to 'sudo' if you need superuser privileges while installing
SUDO=''
# Set to 1 to be quieter while running
PARALLEL= # Or: PARALLEL="-j 5" for 4 CPUs
# Set to 'sudo' if you need superuser privileges while installing
SUDO=''
# Set to 1 to be quieter while running
-QUIET=
1
+QUIET=
0
# Set to 1 to use linaro gcc instead of the FSF gcc
# Set to 1 to use linaro gcc instead of the FSF gcc
-USE_LINARO=1
+USE_LINARO=0
+# Set to 1 to enable C++
+USE_CPP=0
# Set to 1 to enable building of OpenOCD
# Set to 1 to enable building of OpenOCD
-OOCD_EN=
1
+OOCD_EN=
0
# Set to 1 to build libstm32 provided by ST
LIBSTM32_EN=0
# Set to 1 to build libopenstm32 an open source library for stm32
# Set to 1 to build libstm32 provided by ST
LIBSTM32_EN=0
# Set to 1 to build libopenstm32 an open source library for stm32
-LIBOPENSTM32_EN=
1
+LIBOPENSTM32_EN=
0
# Make the gcc default to Cortex-M3
DEFAULT_TO_CORTEX_M3=1
##############################################################################
# Version and download url settings section
##############################################################################
# Make the gcc default to Cortex-M3
DEFAULT_TO_CORTEX_M3=1
##############################################################################
# Version and download url settings section
##############################################################################
-if [ ${USE_LINARO} =
=
0 ] ; then
+if [ ${USE_LINARO} = 0 ] ; then
# For FSF GCC:
# For FSF GCC:
- GCCVERSION=4.5.1
- GCC=gcc-${GCCVERSION}
- GCCURL=http://ftp.gnu.org/gnu/gcc/${GCC}/${GCC}.tar.gz
+ GCCVERSION=4.6.1
+ if [ ${USE_CPP} = 0 ]; then
+ GCC=gcc-core-${GCCVERSION}
+ GCCDIR=gcc-${GCCVERSION}
+ else
+ GCC=gcc-${GCCVERSION}
+ GCCDIR=${GCC}
+ fi
+ GCCURL=http://ftp.gnu.org/gnu/gcc/${GCCDIR}/${GCC}.tar.bz2
else
# For the Linaro GCC:
GCCRELEASE=4.6-2011.07
else
# For the Linaro GCC:
GCCRELEASE=4.6-2011.07
- GCCVERSION=${GCCRELEASE}
- GCC=gcc-linaro-${GCCVERSION}
- GCCURL=http://launchpad.net/gcc-linaro/4.6/${GCCRELEASE}/+download/${GCC}.tar.bz2
+ GCCVERSION=4.6-2011.07-0
+ GCC=gcc-linaro-${GCCRELEASE}
+ GCCDIR=gcc-linaro-${GCCVERSION}
+ GCCURL=http://launchpad.net/gcc-linaro/4.6/${GCCRELEASE}/+download/gcc-linaro-${GCCRELEASE}.tar.bz2
fi
BINUTILS=binutils-2.21
fi
BINUTILS=binutils-2.21
@@
-55,6
+65,9
@@
LIBCMSIS=v1.10-2
LIBSTM32=v3.0.0-1
LIBSTM32USB=v3.0.1-1
LIBOPENSTM32=master
LIBSTM32=v3.0.0-1
LIBSTM32USB=v3.0.1-1
LIBOPENSTM32=master
+GMP=gmp-5.0.2
+MPFR=mpfr-3.0.1
+MPC=mpc-0.9
##############################################################################
# Flags section
##############################################################################
# Flags section
@@
-71,7
+84,7
@@
echo "${CPUS} cpu's detected running make with '${PARALLEL}' flag"
GDBFLAGS=
BINUTILFLAGS=
GDBFLAGS=
BINUTILFLAGS=
-if [ ${DEFAULT_TO_CORTEX_M3} =
=
0 ] ; then
+if [ ${DEFAULT_TO_CORTEX_M3} = 0 ] ; then
GCCFLAGS=
else
# To default to the Cortex-M3:
GCCFLAGS=
else
# To default to the Cortex-M3:
@@
-93,7
+106,7
@@
fi
export PATH="${PREFIX}/bin:${PATH}"
export PATH="${PREFIX}/bin:${PATH}"
-SUMMON_DIR=$
(pwd)
+SUMMON_DIR=$
{WORKDIR}
SOURCES=${SUMMON_DIR}/sources
STAMPS=${SUMMON_DIR}/stamps
SOURCES=${SUMMON_DIR}/sources
STAMPS=${SUMMON_DIR}/stamps
@@
-116,8
+129,7
@@
case "$(uname)" in
echo "Found Darwin OS."
# darwin dependencies
echo "Found Darwin OS."
# darwin dependencies
- DARWINDEPS="wget mpfr libmpc gmp"
- DARWINDEPSCOUNT=4
+ DARWINDEPS="wget"
echo "Installing dependencies ..."
if ! which brew > /dev/null; then
echo "Installing dependencies ..."
if ! which brew > /dev/null; then
@@
-126,13
+138,7
@@
case "$(uname)" in
brew install ${DARWINDEPS} | (grep -v '^Warning: Formula already installed: ' || true)
fi
brew install ${DARWINDEPS} | (grep -v '^Warning: Formula already installed: ' || true)
fi
- GCCFLAGS="${GCCFLAGS} \
- --with-gmp=$(brew --prefix gmp) \
- --with-mpfr=$(brew --prefix mpfr) \
- --with-mpc=$(brew --prefix mpc)
- -with-libiconv-prefix=$(brew --prefix libiconv)"
-
- TAR=gnutar
+ TAR=gnutar
OOCD_CFLAGS="-m32 -I/opt/mine/include -I/opt/local/include"
OOCD_LDFLAGS="-L/opt/mine/lib -L/opt/local/lib"
OOCD_CFLAGS="-m32 -I/opt/mine/include -I/opt/local/include"
OOCD_LDFLAGS="-L/opt/mine/lib -L/opt/local/lib"
@@
-152,7
+158,7
@@
esac
##############################################################################
# Fetch a versioned file from a URL
##############################################################################
# Fetch a versioned file from a URL
-f
unction fetch
{
+f
etch()
{
if [ ! -e ${STAMPS}/$1.fetch ]; then
log "Downloading $1 sources..."
wget -c $2
if [ ! -e ${STAMPS}/$1.fetch ]; then
log "Downloading $1 sources..."
wget -c $2
@@
-161,14
+167,14
@@
function fetch {
}
# Log a message out to the console
}
# Log a message out to the console
-
function log
{
+
log()
{
echo "******************************************************************"
echo "* $*"
echo "******************************************************************"
}
# Unpack an archive
echo "******************************************************************"
echo "* $*"
echo "******************************************************************"
}
# Unpack an archive
-
function unpack
{
+
unpack()
{
log Unpacking $*
# Use 'auto' mode decompression. Replace with a switch if tar doesn't support -a
ARCHIVE=$(ls ${SOURCES}/$1.tar.*)
log Unpacking $*
# Use 'auto' mode decompression. Replace with a switch if tar doesn't support -a
ARCHIVE=$(ls ${SOURCES}/$1.tar.*)
@@
-183,20
+189,25
@@
function unpack {
;;
*)
echo "Unknown archive type of $1"
;;
*)
echo "Unknown archive type of $1"
- echo
${ARCHIVE}
- exit 1
+ echo
"leaving the decision to tar"
+ TYPE=
;;
esac
${TAR} xf${TYPE}${TARFLAGS} ${SOURCES}/$1.tar.*
}
# Install a build
;;
esac
${TAR} xf${TYPE}${TARFLAGS} ${SOURCES}/$1.tar.*
}
# Install a build
-
function install
{
+
install()
{
log $1
${SUDO} make ${MAKEFLAGS} $2 $3 $4 $5 $6 $7 $8
}
log $1
${SUDO} make ${MAKEFLAGS} $2 $3 $4 $5 $6 $7 $8
}
-
+if [ ! -d $SUMMON_DIR ]; then
+ mkdir -p ${SUMMON_DIR}
+ SUMMON_DIR_CREATED=1
+else
+ SUMMON_DIR_CREATED=0
+fi
mkdir -p ${STAMPS} ${SOURCES}
cd ${SOURCES}
mkdir -p ${STAMPS} ${SOURCES}
cd ${SOURCES}
@@
-205,6
+216,9
@@
fetch ${BINUTILS} http://ftp.gnu.org/gnu/binutils/${BINUTILS}.tar.bz2
fetch ${GCC} ${GCCURL}
fetch ${NEWLIB} ftp://sources.redhat.com/pub/newlib/${NEWLIB}.tar.gz
fetch ${GDB} http://ftp.gnu.org/gnu/gdb/${GDB}.tar.bz2
fetch ${GCC} ${GCCURL}
fetch ${NEWLIB} ftp://sources.redhat.com/pub/newlib/${NEWLIB}.tar.gz
fetch ${GDB} http://ftp.gnu.org/gnu/gdb/${GDB}.tar.bz2
+fetch ${GMP} ftp://ftp.gmplib.org/pub/${GMP}/${GMP}.tar.bz2
+fetch ${MPFR} http://www.mpfr.org/${MPFR}/${MPFR}.tar.bz2
+fetch ${MPC} http://www.multiprecision.org/mpc/download/${MPC}.tar.gz
if [ ${OOCD_EN} != 0 ]; then
if [ ! -e openocd-${OOCD}.tar.bz2 ]; then
if [ ${OOCD_EN} != 0 ]; then
if [ ! -e openocd-${OOCD}.tar.bz2 ]; then
@@
-294,9
+308,15
@@
fi
if [ ! -e ${STAMPS}/${GCC}-boot.build ]; then
unpack ${GCC} boot
if [ ! -e ${STAMPS}/${GCC}-boot.build ]; then
unpack ${GCC} boot
+ unpack ${GMP}
+ mv ${GMP} ${GCCDIR}/gmp
+ unpack ${MPFR}
+ mv ${MPFR} ${GCCDIR}/mpfr
+ unpack ${MPC}
+ mv ${MPC} ${GCCDIR}/mpc
cd build
log "Configuring ${GCC}-boot"
cd build
log "Configuring ${GCC}-boot"
- ../${GCC}/configure --target=${TARGET} \
+ ../${GCC
DIR
}/configure --target=${TARGET} \
--prefix=${PREFIX} \
--enable-interwork \
--enable-multilib \
--prefix=${PREFIX} \
--enable-interwork \
--enable-multilib \
@@
-316,13
+336,15
@@
if [ ! -e ${STAMPS}/${GCC}-boot.build ]; then
cd ..
log "Cleaning up ${GCC}-boot"
touch ${STAMPS}/${GCC}-boot.build
cd ..
log "Cleaning up ${GCC}-boot"
touch ${STAMPS}/${GCC}-boot.build
- rm -rf build/* ${GCC}
+ rm -rf build/* ${GCC
DIR
}
fi
if [ ! -e ${STAMPS}/${NEWLIB}.build ]; then
unpack ${NEWLIB}
cd build
log "Configuring ${NEWLIB}"
fi
if [ ! -e ${STAMPS}/${NEWLIB}.build ]; then
unpack ${NEWLIB}
cd build
log "Configuring ${NEWLIB}"
+ # configuration options and flags partially
+ # from https://github.com/jsnyder/arm-eabi-toolchain
../${NEWLIB}/configure --target=${TARGET} \
--prefix=${PREFIX} \
--enable-interwork \
../${NEWLIB}/configure --target=${TARGET} \
--prefix=${PREFIX} \
--enable-interwork \
@@
-332,9
+354,13
@@
if [ ! -e ${STAMPS}/${NEWLIB}.build ]; then
--disable-nls \
--disable-werror \
--disable-newlib-supplied-syscalls \
--disable-nls \
--disable-werror \
--disable-newlib-supplied-syscalls \
+ --disable-shared \
+ --disable-nls \
+ --disable-libgloss \
--with-float=soft
log "Building ${NEWLIB}"
--with-float=soft
log "Building ${NEWLIB}"
- make ${MAKEFLAGS} CFLAGS_FOR_TARGET="-msoft-float" CCASFLAGS="-msoft-float"
+ NEWLIB_FLAGS="-ffunction-sections -fdata-sections -DPREFER_SIZE_OVER_SPEED -D__OPTIMIZE_SIZE__ -Os -fomit-frame-pointer -fno-unroll-loops -D__BUFSIZ__=256 -mabi=aapcs"
+ make ${MAKEFLAGS} CFLAGS_FOR_TARGET="${NEWLIB_FLAGS}" CCASFLAGS="${NEWLIB_FLAGS}"
install ${NEWLIB} install
cd ..
log "Cleaning up ${NEWLIB}"
install ${NEWLIB} install
cd ..
log "Cleaning up ${NEWLIB}"
@@
-345,13
+371,19
@@
fi
# Yes, you need to build gcc again!
if [ ! -e ${STAMPS}/${GCC}.build ]; then
unpack ${GCC}
# Yes, you need to build gcc again!
if [ ! -e ${STAMPS}/${GCC}.build ]; then
unpack ${GCC}
+ unpack ${GMP}
+ mv ${GMP} ${GCCDIR}/gmp
+ unpack ${MPFR}
+ mv ${MPFR} ${GCCDIR}/mpfr
+ unpack ${MPC}
+ mv ${MPC} ${GCCDIR}/mpc
cd build
log "Configuring ${GCC}"
cd build
log "Configuring ${GCC}"
- ../${GCC}/configure --target=${TARGET} \
+ [ ${USE_CPP} = 1 ] && GCCFLAGS="--enable-languages='c,c++' ${GCCFLAGS}"
+ ../${GCCDIR}/configure --target=${TARGET} \
--prefix=${PREFIX} \
--enable-interwork \
--enable-multilib \
--prefix=${PREFIX} \
--enable-interwork \
--enable-multilib \
- --enable-languages="c,c++" \
--with-newlib \
--disable-shared \
--with-gnu-as \
--with-newlib \
--disable-shared \
--with-gnu-as \
@@
-366,7
+398,7
@@
if [ ! -e ${STAMPS}/${GCC}.build ]; then
cd ..
log "Cleaning up ${GCC}"
touch ${STAMPS}/${GCC}.build
cd ..
log "Cleaning up ${GCC}"
touch ${STAMPS}/${GCC}.build
- rm -rf build/* ${GCC}
+ rm -rf build/* ${GCC
DIR
}
fi
if [ ! -e ${STAMPS}/${GDB}.build ]; then
fi
if [ ! -e ${STAMPS}/${GDB}.build ]; then
@@
-474,3
+506,8
@@
if [ ! -e ${STAMPS}/libopenstm32-${LIBOPENSTM32}.build ]; then
rm -rf libopenstm32-${LIBOPENSTM32}
fi
fi
rm -rf libopenstm32-${LIBOPENSTM32}
fi
fi
+
+if [ ${SUMMON_DIR_CREATED} = 1 ]; then
+ log "Removing work directory"
+ rm -rf ${SUMMON_DIR}
+fi