+/*MONO_ARCH_HAVE_HANDLER_BLOCK_GUARD*/
+gpointer
+mono_arch_install_handler_block_guard (MonoJitInfo *ji, MonoJitExceptionInfo *clause, MonoContext *ctx, gpointer new_value)
+{
+ int offset;
+ gpointer *sp, old_value;
+ char *bp;
+ const unsigned char *handler;
+
+ /*Decode the first instruction to figure out where did we store the spvar*/
+ /*Our jit MUST generate the following:
+ mov %esp, -?(%ebp)
+ Which is encoded as: 0x89 mod_rm.
+ mod_rm (esp, ebp, imm) which can be: (imm will never be zero)
+ mod (reg + imm8): 01 reg(esp): 100 rm(ebp): 101 -> 01100101 (0x65)
+ mod (reg + imm32): 10 reg(esp): 100 rm(ebp): 101 -> 10100101 (0xA5)
+ */
+ handler = clause->handler_start;
+
+ if (*handler != 0x89)
+ return NULL;
+
+ ++handler;
+
+ if (*handler == 0x65)
+ offset = *(signed char*)(handler + 1);
+ else if (*handler == 0xA5)
+ offset = *(int*)(handler + 1);
+ else
+ return NULL;
+
+ /*Load the spvar*/
+ bp = MONO_CONTEXT_GET_BP (ctx);
+ sp = *(gpointer*)(bp + offset);
+
+ old_value = *sp;
+ if (old_value < ji->code_start || (char*)old_value > ((char*)ji->code_start + ji->code_size))
+ return old_value;
+
+ *sp = new_value;
+
+ return old_value;
+}
+
+/*
+ * mono_aot_emit_load_got_addr:
+ *
+ * Emit code to load the got address.
+ * On x86, the result is placed into EBX.
+ */
+guint8*
+mono_arch_emit_load_got_addr (guint8 *start, guint8 *code, MonoCompile *cfg, MonoJumpInfo **ji)
+{
+ x86_call_imm (code, 0);
+ /*
+ * The patch needs to point to the pop, since the GOT offset needs
+ * to be added to that address.
+ */
+ if (cfg)
+ mono_add_patch_info (cfg, code - cfg->native_code, MONO_PATCH_INFO_GOT_OFFSET, NULL);
+ else
+ *ji = mono_patch_info_list_prepend (*ji, code - start, MONO_PATCH_INFO_GOT_OFFSET, NULL);
+ x86_pop_reg (code, MONO_ARCH_GOT_REG);
+ x86_alu_reg_imm (code, X86_ADD, MONO_ARCH_GOT_REG, 0xf0f0f0f0);
+
+ return code;
+}
+
+/*
+ * mono_ppc_emit_load_aotconst:
+ *
+ * Emit code to load the contents of the GOT slot identified by TRAMP_TYPE and
+ * TARGET from the mscorlib GOT in full-aot code.
+ * On x86, the GOT address is assumed to be in EBX, and the result is placed into
+ * EAX.
+ */
+guint8*
+mono_arch_emit_load_aotconst (guint8 *start, guint8 *code, MonoJumpInfo **ji, int tramp_type, gconstpointer target)
+{
+ /* Load the mscorlib got address */
+ x86_mov_reg_membase (code, X86_EAX, MONO_ARCH_GOT_REG, sizeof (gpointer), 4);
+ *ji = mono_patch_info_list_prepend (*ji, code - start, tramp_type, target);
+ /* arch_emit_got_access () patches this */
+ x86_mov_reg_membase (code, X86_EAX, X86_EAX, 0xf0f0f0f0, 4);
+
+ return code;
+}
+
+/* Can't put this into mini-x86.h */
+gpointer
+mono_x86_get_signal_exception_trampoline (MonoTrampInfo **info, gboolean aot);
+
+GSList *
+mono_arch_get_trampolines (gboolean aot)
+{
+ MonoTrampInfo *info;
+ GSList *tramps = NULL;
+
+ mono_x86_get_signal_exception_trampoline (&info, aot);
+
+ tramps = g_slist_append (tramps, info);
+
+ return tramps;
+}
+
+
+#if __APPLE__
+#define DBG_SIGNAL SIGBUS
+#else
+#define DBG_SIGNAL SIGSEGV
+#endif
+
+/* Soft Debug support */
+#ifdef MONO_ARCH_SOFT_DEBUG_SUPPORTED
+
+/*
+ * mono_arch_set_breakpoint:
+ *
+ * Set a breakpoint at the native code corresponding to JI at NATIVE_OFFSET.
+ * The location should contain code emitted by OP_SEQ_POINT.
+ */
+void
+mono_arch_set_breakpoint (MonoJitInfo *ji, guint8 *ip)
+{
+ guint8 *code = ip;
+
+ /*
+ * In production, we will use int3 (has to fix the size in the md
+ * file). But that could confuse gdb, so during development, we emit a SIGSEGV
+ * instead.
+ */
+ g_assert (code [0] == 0x90);
+ x86_alu_reg_mem (code, X86_CMP, X86_EAX, (guint32)bp_trigger_page);
+}
+
+/*
+ * mono_arch_clear_breakpoint:
+ *
+ * Clear the breakpoint at IP.
+ */
+void
+mono_arch_clear_breakpoint (MonoJitInfo *ji, guint8 *ip)
+{
+ guint8 *code = ip;
+ int i;
+
+ for (i = 0; i < 6; ++i)
+ x86_nop (code);
+}
+
+/*
+ * mono_arch_start_single_stepping:
+ *
+ * Start single stepping.
+ */
+void
+mono_arch_start_single_stepping (void)
+{
+ mono_mprotect (ss_trigger_page, mono_pagesize (), 0);
+}
+
+/*
+ * mono_arch_stop_single_stepping:
+ *
+ * Stop single stepping.
+ */
+void
+mono_arch_stop_single_stepping (void)
+{
+ mono_mprotect (ss_trigger_page, mono_pagesize (), MONO_MMAP_READ);
+}
+
+/*
+ * mono_arch_is_single_step_event:
+ *
+ * Return whenever the machine state in SIGCTX corresponds to a single
+ * step event.
+ */
+gboolean
+mono_arch_is_single_step_event (void *info, void *sigctx)
+{
+#ifdef TARGET_WIN32
+ EXCEPTION_RECORD* einfo = (EXCEPTION_RECORD*)info; /* Sometimes the address is off by 4 */
+ if ((einfo->ExceptionInformation[1] >= ss_trigger_page && (guint8*)einfo->ExceptionInformation[1] <= (guint8*)ss_trigger_page + 128))
+ return TRUE;
+ else
+ return FALSE;
+#else
+ siginfo_t* sinfo = (siginfo_t*) info;
+ /* Sometimes the address is off by 4 */
+ if (sinfo->si_signo == DBG_SIGNAL && (sinfo->si_addr >= ss_trigger_page && (guint8*)sinfo->si_addr <= (guint8*)ss_trigger_page + 128))
+ return TRUE;
+ else
+ return FALSE;
+#endif
+}
+
+gboolean
+mono_arch_is_breakpoint_event (void *info, void *sigctx)
+{
+#ifdef TARGET_WIN32
+ EXCEPTION_RECORD* einfo = (EXCEPTION_RECORD*)info; /* Sometimes the address is off by 4 */
+ if ((einfo->ExceptionInformation[1] >= bp_trigger_page && (guint8*)einfo->ExceptionInformation[1] <= (guint8*)bp_trigger_page + 128))
+ return TRUE;
+ else
+ return FALSE;
+#else
+ siginfo_t* sinfo = (siginfo_t*)info;
+ /* Sometimes the address is off by 4 */
+ if (sinfo->si_signo == DBG_SIGNAL && (sinfo->si_addr >= bp_trigger_page && (guint8*)sinfo->si_addr <= (guint8*)bp_trigger_page + 128))
+ return TRUE;
+ else
+ return FALSE;
+#endif
+}
+
+/*
+ * mono_arch_get_ip_for_breakpoint:
+ *
+ * See mini-amd64.c for docs.
+ */
+guint8*
+mono_arch_get_ip_for_breakpoint (MonoJitInfo *ji, MonoContext *ctx)
+{
+ guint8 *ip = MONO_CONTEXT_GET_IP (ctx);
+
+ return ip;
+}
+
+#define BREAKPOINT_SIZE 6
+
+/*
+ * mono_arch_get_ip_for_single_step:
+ *
+ * See mini-amd64.c for docs.
+ */
+guint8*
+mono_arch_get_ip_for_single_step (MonoJitInfo *ji, MonoContext *ctx)
+{
+ guint8 *ip = MONO_CONTEXT_GET_IP (ctx);
+
+ /* Size of x86_alu_reg_imm */
+ ip += 6;
+
+ return ip;
+}
+
+/*
+ * mono_arch_skip_breakpoint:
+ *
+ * See mini-amd64.c for docs.
+ */
+void
+mono_arch_skip_breakpoint (MonoContext *ctx)
+{
+ MONO_CONTEXT_SET_IP (ctx, (guint8*)MONO_CONTEXT_GET_IP (ctx) + BREAKPOINT_SIZE);
+}
+
+/*
+ * mono_arch_skip_single_step:
+ *
+ * See mini-amd64.c for docs.
+ */
+void
+mono_arch_skip_single_step (MonoContext *ctx)
+{
+ MONO_CONTEXT_SET_IP (ctx, (guint8*)MONO_CONTEXT_GET_IP (ctx) + 6);
+}
+
+/*
+ * mono_arch_get_seq_point_info:
+ *
+ * See mini-amd64.c for docs.
+ */
+gpointer
+mono_arch_get_seq_point_info (MonoDomain *domain, guint8 *code)
+{
+ NOT_IMPLEMENTED;
+ return NULL;
+}
+
+#endif
+