/* src/vm/jit/replace.h - on-stack replacement of methods Copyright (C) 1996-2005, 2006, 2007 R. Grafl, A. Krall, C. Kruegel, C. Oates, R. Obermaisser, M. Platter, M. Probst, S. Ring, E. Steiner, C. Thalinger, D. Thuernbeck, P. Tomsich, C. Ullrich, J. Wenninger, Institut f. Computersprachen - TU Wien This file is part of CACAO. This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. */ #ifndef _REPLACE_H #define _REPLACE_H #include "config.h" #include "vm/types.h" #if !defined(ENABLE_REPLACEMENT) /*** macros for the codegens (disabled version) ************************/ #define REPLACEMENT_POINTS_INIT(cd, jd) #define REPLACEMENT_POINTS_RESET(cd, jd) #define REPLACEMENT_POINT_BLOCK_START(cd, bptr) #define REPLACEMENT_POINT_INLINE_START(cd, iptr) #define REPLACEMENT_POINT_INLINE_BODY(cd, iptr) #define REPLACEMENT_POINT_RETURN(cd, iptr) #define REPLACEMENT_POINT_INVOKE(cd, iptr) #define REPLACEMENT_POINT_INVOKE_RETURN(cd, iptr) #define REPLACEMENT_POINT_FORGC_BUILTIN(cd, iptr) #define REPLACEMENT_POINT_FORGC_BUILTIN_RETURN(cd, iptr) #else /* defined(ENABLE_REPLACEMENT) */ /* forward typedefs ***********************************************************/ typedef struct rplalloc rplalloc; typedef struct rplpoint rplpoint; typedef struct executionstate_t executionstate_t; typedef struct sourcestate_t sourcestate_t; typedef struct sourceframe_t sourceframe_t; typedef struct replace_safestack_t replace_safestack_t; typedef union replace_val_t replace_val_t; #include "arch.h" #include "md-abi.h" #include "vm/jit/reg.h" #include "vm/jit/stacktrace.h" #include "vmcore/method.h" /* alignment for the safe stack used during replacement */ #define REPLACE_STACK_ALIGNMENT 16 /* the size of the safe stack we use during replacement */ /* Must be a multiple of REPLACE_STACK_ALIGNMENT. */ #define REPLACE_SAFESTACK_SIZE 16384 /* bytes */ /*** structs *********************************************************/ #define RPLALLOC_STACK -1 #define RPLALLOC_PARAM -2 #define RPLALLOC_SYNC -3 /* `rplalloc` is a compact struct for register allocation info */ /* XXX optimize this for space efficiency */ struct rplalloc { s4 index; /* local index, -1 for stack slot */ s4 regoff; /* register index / stack slot offset */ unsigned int flags:4; /* OR of (INMEMORY,...) */ unsigned int type:4; /* TYPE_... constant */ }; #if INMEMORY > 0x08 #error value of INMEMORY is too big to fit in rplalloc.flags #endif /* XXX what to do about overlapping rplpoints? */ /* CAUTION: Do not change the numerical values. These are used as */ /* indices into replace_normalize_type_map. */ #define RPLPOINT_TYPE_STD BBTYPE_STD #define RPLPOINT_TYPE_EXH BBTYPE_EXH #define RPLPOINT_TYPE_SBR BBTYPE_SBR #define RPLPOINT_TYPE_CALL 3 #define RPLPOINT_TYPE_INLINE 4 #define RPLPOINT_TYPE_RETURN 5 #define RPLPOINT_TYPE_BODY 6 #define RPLPOINT_FLAG_NOTRAP 0x01 /* rplpoint cannot be trapped */ #define RPLPOINT_FLAG_COUNTDOWN 0x02 /* count down hits */ #define RPLPOINT_FLAG_ACTIVE 0x08 /* trap is active */ #if !defined(NDEBUG) #define RPLPOINT_CHECK(type) , RPLPOINT_TYPE_##type #define RPLPOINT_CHECK_BB(bptr) , (bptr)->type #else #define RPLPOINT_CHECK(type) #define RPLPOINT_CHECK_BB(bptr) #endif /* An `rplpoint` represents a replacement point in a compiled method */ struct rplpoint { u1 *pc; /* machine code PC of this point */ methodinfo *method; /* source method this point is in */ rplpoint *parent; /* rplpoint of the inlined body */ /* XXX unify with code */ rplalloc *regalloc; /* pointer to register index table */ s4 id; /* id of the rplpoint within method */ s4 callsize; /* size of call code in bytes */ unsigned int regalloccount:20; /* number of local allocations */ unsigned int type:4; /* RPLPOINT_TYPE_... constant */ unsigned int flags:8; /* OR of RPLPOINT_... constants */ }; union replace_val_t { s4 i; s8 l; ptrint p; struct { u4 lo; u4 hi; } words; float f; double d; java_object_t *a; }; /* An `executionsstate` represents the state of a thread as it reached */ /* an replacement point or is about to enter one. */ struct executionstate_t { u1 *pc; /* program counter */ u1 *sp; /* stack pointer within method */ u1 *pv; /* procedure value. NULL means */ /* search the AVL tree */ ptrint intregs[INT_REG_CNT]; /* register values */ double fltregs[FLT_REG_CNT]; /* register values */ #if defined(HAS_ADDRESS_REGISTER_FILE) ptrint adrregs[ADR_REG_CNT]; /* register values */ #endif codeinfo *code; /* codeinfo corresponding to the pv */ }; struct sourceframe_t { sourceframe_t *down; /* source frame down the call chain */ methodinfo *method; /* method this frame is in */ s4 id; s4 type; /* values */ replace_val_t instance; replace_val_t *javastack; /* values of stack vars */ u1 *javastacktype; /* types of stack vars */ s4 javastackdepth; /* number of stack vars */ replace_val_t *javalocals; /* values of javalocals */ u1 *javalocaltype; /* types of javalocals */ s4 javalocalcount; /* number of javalocals */ replace_val_t *syncslots; s4 syncslotcount; /* XXX do we need more than one? */ /* mapping info */ rplpoint *fromrp; /* rplpoint used to read this frame */ codeinfo *fromcode; /* code this frame was using */ rplpoint *torp; /* rplpoint this frame was mapped to */ codeinfo *tocode; /* code this frame was mapped to */ /* info for native frames */ stackframeinfo *sfi; /* sfi for native frames, otherwise NULL */ s4 nativeframesize; /* size (bytes) of native frame */ u1 *nativepc; ptrint nativesavint[INT_SAV_CNT]; /* XXX temporary */ double nativesavflt[FLT_REG_CNT]; /* XXX temporary */ #if defined(HAS_ADDRESS_REGISTER_FILE) ptrint nativesavadr[ADR_SAV_CNT]; /* XXX temporary */ #endif }; #define REPLACE_IS_NATIVE_FRAME(frame) ((frame)->sfi != NULL) #define REPLACE_IS_JAVA_FRAME(frame) ((frame)->sfi == NULL) struct sourcestate_t { sourceframe_t *frames; /* list of source frames, from bottom up */ }; /* replace_safestack_t ********************************************************* This struct is used to allocate a safe stack area to be used during the last phase of replacement. It also contains copies of all data needed during this phase. (The data cannot be kept in normal variables, as the C stack may be destroyed during replacement.) CAUTION: Do not change the layout of this struct! The assembler code depends on the order of fields. (`stack` must be first, directly followed by `es`.) *******************************************************************************/ struct replace_safestack_t { u1 stack[REPLACE_SAFESTACK_SIZE]; executionstate_t es; sourcestate_t *ss; u1 *mem; /* start of the allocated memory chunk */ s4 dumpsize; }; /*** macros for the codegens *******************************************/ #define REPLACEMENT_POINTS_INIT(cd, jd) \ if (!replace_create_replacement_points(jd)) \ return false; \ (cd)->replacementpoint = (jd)->code->rplpoints; #define REPLACEMENT_POINTS_RESET(cd, jd) \ (cd)->replacementpoint = (jd)->code->rplpoints; #define REPLACEMENT_POINT_BLOCK_START(cd, bptr) \ if ((bptr)->bitflags & BBFLAG_REPLACEMENT) \ codegen_set_replacement_point((cd) RPLPOINT_CHECK_BB(bptr)); #define REPLACEMENT_POINT_INLINE_START(cd, iptr) \ codegen_set_replacement_point(cd RPLPOINT_CHECK(INLINE)); #define REPLACEMENT_POINT_INLINE_BODY(cd, iptr) \ codegen_set_replacement_point_notrap(cd RPLPOINT_CHECK(BODY)); #define REPLACEMENT_POINT_RETURN(cd, iptr) \ codegen_set_replacement_point(cd RPLPOINT_CHECK(RETURN)); #define REPLACEMENT_POINT_INVOKE(cd, iptr) \ codegen_set_replacement_point(cd RPLPOINT_CHECK(CALL)); #define REPLACEMENT_POINT_INVOKE_RETURN(cd, iptr) \ if (iptr->opc != ICMD_BUILTIN) \ cd->replacementpoint[-1].callsize = (cd->mcodeptr - cd->mcodebase)\ - (ptrint) cd->replacementpoint[-1].pc; #define REPLACEMENT_POINT_FORGC_BUILTIN(cd, iptr) \ codegen_set_replacement_point(cd RPLPOINT_CHECK(CALL)); #define REPLACEMENT_POINT_FORGC_BUILTIN_RETURN(cd, iptr) \ if (iptr->opc == ICMD_BUILTIN) \ cd->replacementpoint[-1].callsize = (cd->mcodeptr - cd->mcodebase)\ - (ptrint) cd->replacementpoint[-1].pc; /*** prototypes ********************************************************/ bool replace_create_replacement_points(jitdata *jd); void replace_free_replacement_points(codeinfo *code); void replace_activate_replacement_points(codeinfo *code, bool mappable); void replace_deactivate_replacement_points(codeinfo *code); bool replace_me_wrapper(u1 *pc); void replace_me(rplpoint *rp,executionstate_t *es); #if !defined(NDEBUG) void replace_show_replacement_points(codeinfo *code); void replace_replacement_point_println(rplpoint *rp, int depth); void replace_executionstate_println(executionstate_t *es); void replace_sourcestate_println(sourcestate_t *ss); void replace_sourcestate_println_short(sourcestate_t *ss); void replace_source_frame_println(sourceframe_t *frame); #endif /* machine dependent functions (code in ARCH_DIR/md.c) */ #if defined(ENABLE_JIT) void md_patch_replacement_point(codeinfo *code, s4 index, rplpoint *rp, u1 *savedmcode); #endif #endif /* defined(ENABLE_REPLACEMENT) */ #endif /* _REPLACE_H */ /* * These are local overrides for various environment variables in Emacs. * Please do not remove this and leave it at the end of the file, where * Emacs will automagically detect them. * --------------------------------------------------------------------- * Local variables: * mode: c * indent-tabs-mode: t * c-basic-offset: 4 * tab-width: 4 * End: * vim:noexpandtab:sw=4:ts=4: */