/*
 * This file is part of the coreboot project.
 *
 * Copyright (C) 2000 AG Electronics Ltd.
 * Copyright (C) 2003-2004 Linux Networx
 * Copyright (C) 2004 Tyan
 * Copyright (C) 2005 Digital Design Corporation
 * Copyright (C) 2006 Ron Minnich, LANL
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 2 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
 */

#include <arch/io.h>
#include <device/device.h>
#include <device/pnp.h>
#include <console/console.h>
#include <device/smbus.h>
#include <string.h>
#include <bitops.h>
#include <uart8250.h>
#include <pc80/keyboard.h>
#include <stdlib.h>
#include "chip.h"
#include "lpc47m10x.h"

/* Forward declarations */
static void enable_dev(device_t dev);
static void lpc47m10x_pnp_set_resources(device_t dev);
static void lpc47m10x_pnp_enable_resources(device_t dev);
static void lpc47m10x_pnp_enable(device_t dev);
static void lpc47m10x_init(device_t dev);

static void pnp_enter_conf_state(device_t dev);
static void pnp_exit_conf_state(device_t dev);
// static void dump_pnp_device(device_t dev);

struct chip_operations superio_smsc_lpc47m10x_ops = {
	CHIP_NAME("SMSC LPC47M10x Super I/O")
	.enable_dev = enable_dev
};

static struct device_operations ops = {
	.read_resources   = pnp_read_resources,
	.set_resources    = lpc47m10x_pnp_set_resources,
	.enable_resources = lpc47m10x_pnp_enable_resources,
	.enable           = lpc47m10x_pnp_enable,
	.init             = lpc47m10x_init,
};

static struct pnp_info pnp_dev_info[] = {
	{ &ops, LPC47M10X2_FDC, PNP_IO0 | PNP_IRQ0 | PNP_DRQ0, {0x07f8, 0}, },
	{ &ops, LPC47M10X2_PP,  PNP_IO0 | PNP_IRQ0 | PNP_DRQ0, {0x07f8, 0}, },
	{ &ops, LPC47M10X2_SP1, PNP_IO0 | PNP_IRQ0, {0x07f8, 0}, },
	{ &ops, LPC47M10X2_SP2, PNP_IO0 | PNP_IRQ0, {0x07f8, 0}, },
	{ &ops, LPC47M10X2_KBC, PNP_IO0 | PNP_IO1 | PNP_IRQ0 | PNP_IRQ1, {0x07ff, 0}, {0x07ff, 4}, },
	{ &ops, LPC47M10X2_PME, PNP_IO0, { 0x0f80, 0 }, },
};

/**
 * Create device structures and allocate resources to devices specified in the
 * pnp_dev_info array (above).
 *
 * @param dev Pointer to structure describing a Super I/O device.
 */
static void enable_dev(device_t dev)
{
	pnp_enable_devices(dev, &pnp_ops, ARRAY_SIZE(pnp_dev_info),
			   pnp_dev_info);
}

/**
 * Configure the specified Super I/O device with the resources (I/O space,
 * etc.) that have been allocated for it.
 *
 * @param dev Pointer to structure describing a Super I/O device.
 */
static void lpc47m10x_pnp_set_resources(device_t dev)
{
	pnp_enter_conf_state(dev);
	pnp_set_resources(dev);
	pnp_exit_conf_state(dev);
}

static void lpc47m10x_pnp_enable_resources(device_t dev)
{
	pnp_enter_conf_state(dev);
	pnp_enable_resources(dev);
	pnp_exit_conf_state(dev);
}

static void lpc47m10x_pnp_enable(device_t dev)
{
	pnp_enter_conf_state(dev);
	pnp_set_logical_device(dev);
	pnp_set_enable(dev, !!dev->enabled);
	pnp_exit_conf_state(dev);
}

/**
 * Initialize the specified Super I/O device.
 *
 * Devices other than COM ports and the keyboard controller are ignored.
 * For COM ports, we configure the baud rate.
 *
 * @param dev Pointer to structure describing a Super I/O device.
 */
static void lpc47m10x_init(device_t dev)
{
	struct superio_smsc_lpc47m10x_config *conf = dev->chip_info;

	if (!dev->enabled)
		return;

	switch(dev->path.pnp.device) {
	case LPC47M10X2_KBC:
		pc_keyboard_init(&conf->keyboard);
		break;
	}
}

static void pnp_enter_conf_state(device_t dev)
{
	outb(0x55, dev->path.pnp.port);
}

static void pnp_exit_conf_state(device_t dev)
{
	outb(0xaa, dev->path.pnp.port);
}

#if 0
/**
 * Print the values of all of the LPC47M10X2's configuration registers.
 *
 * NOTE: The LPC47M10X2 must be in config mode when this function is called.
 *
 * @param dev Pointer to structure describing a Super I/O device.
 */
static void dump_pnp_device(device_t dev)
{
	int i;
	print_debug("\n");

	for (i = 0; i <= LPC47M10X2_MAX_CONFIG_REGISTER; i++) {
		u8 register_value;

		if ((i & 0x0f) == 0) {
			print_debug_hex8(i);
			print_debug_char(':');
		}

		/*
		 * Skip over 'register' that would cause exit from
		 * configuration mode.
		 */
		if (i == 0xaa)
			register_value = 0xaa;
		else
			register_value = pnp_read_config(dev, i);

		print_debug_char(' ');
		print_debug_hex8(register_value);
		if ((i & 0x0f) == 0x0f)
			print_debug("\n");
	}

	print_debug("\n");
}
#endif