/* * This file is part of the coreboot project. * * Copyright (C) 2011 The ChromiumOS Authors. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ #include #include #include #include #include #include #include "chip.h" #include "it8772f.h" static void pnp_enter_ext_func_mode(device_t dev) { u16 port = dev->path.pnp.port; outb(0x87, port); outb(0x01, port); outb(0x55, port); outb((port == 0x4e) ? 0xaa : 0x55, port); } static void pnp_exit_ext_func_mode(device_t dev) { pnp_write_config(dev, 0x02, 0x02); } static inline u8 it8772f_envc_read(struct resource *res, u8 addr) { outb(addr, res->base + 5); return inb(res->base + 6); } static inline void it8772f_envc_write(struct resource *res, u8 addr, u8 value) { outb(addr, res->base + 5); outb(value, res->base + 6); } /* * Setup External Temperature to read via PECI into TMPINx register */ static void it8772f_enable_peci(struct resource *res, int tmpin) { if (tmpin < 1 || tmpin > 3) return; /* Enable PECI interface */ it8772f_envc_write(res, IT8772F_INTERFACE_SELECT, IT8772F_INTERFACE_SEL_PECI | IT8772F_INTERFACE_SPEED_TOLERANCE); /* Setup External Temperature using PECI GetTemp */ it8772f_envc_write(res, IT8772F_EXTEMP_ADDRESS, PECI_CLIENT_ADDRESS); it8772f_envc_write(res, IT8772F_EXTEMP_COMMAND, PECI_GETTEMP_COMMAND); it8772f_envc_write(res, IT8772F_EXTEMP_WRITE_LENGTH, PECI_GETTEMP_WRITE_LENGTH); it8772f_envc_write(res, IT8772F_EXTEMP_READ_LENGTH, PECI_GETTEMP_READ_LENGTH); it8772f_envc_write(res, IT8772F_EXTEMP_CONTROL, IT8772F_EXTEMP_CONTROL_AUTO_4HZ | IT8772F_EXTEMP_CONTROL_AUTO_START); /* External Temperature reported in TMPINx register */ it8772f_envc_write(res, IT8772F_ADC_TEMP_CHANNEL_ENABLE, (tmpin & 3) << 6); } /* * Setup a FAN PWM interface for software control */ static void it8772f_enable_fan(struct resource *res, int fan) { u8 reg; if (fan < 1 || fan > 3) return; /* Enable 6MHz (23.43kHz PWM) active high output */ reg = it8772f_envc_read(res, IT8772F_FAN_CTL_MODE); reg |= IT8772F_FAN_CTL_ON(fan) | IT8772F_FAN_PWM_CLOCK_6MHZ | IT8772F_FAN_CTL_POLARITY_HIGH; it8772f_envc_write(res, IT8772F_FAN_CTL_MODE, reg); /* Enable output in smart mode */ reg = it8772f_envc_read(res, IT8772F_FAN_MAIN_CTL); reg |= IT8772F_FAN_MAIN_CTL_TAC_SMART(fan); reg |= IT8772F_FAN_MAIN_CTL_TAC_EN(fan); it8772f_envc_write(res, IT8772F_FAN_MAIN_CTL, reg); switch (fan) { case 2: /* Enable software operation */ it8772f_envc_write(res, IT8772F_FAN_CTL2_PWM_MODE, IT8772F_FAN_CTL_PWM_MODE_SOFTWARE); /* Disable Smoothing */ it8772f_envc_write(res, IT8772F_FAN_CTL2_AUTO_MODE, IT8772F_FAN_CTL_AUTO_SMOOTHING_DIS); /* Set a default medium fan speed */ it8772f_envc_write(res, IT8772F_FAN_CTL2_PWM_START, 0x80); break; case 3: /* Enable software operation */ it8772f_envc_write(res, IT8772F_FAN_CTL3_PWM_MODE, IT8772F_FAN_CTL_PWM_MODE_SOFTWARE); /* Disable Smoothing */ it8772f_envc_write(res, IT8772F_FAN_CTL3_AUTO_MODE, IT8772F_FAN_CTL_AUTO_SMOOTHING_DIS); /* Set a default medium fan speed */ it8772f_envc_write(res, IT8772F_FAN_CTL3_PWM_START, 0x80); break; } } static void it8772f_init(device_t dev) { struct superio_ite_it8772f_config *conf = dev->chip_info; struct resource *res; if (!dev->enabled) return; switch (dev->path.pnp.device) { case IT8772F_EC: res = find_resource(dev, PNP_IDX_IO0); if (!res) break; /* Enable PECI if configured */ it8772f_enable_peci(res, conf->peci_tmpin); /* Enable FANx if configured */ if (conf->fan1_enable) it8772f_enable_fan(res, 1); if (conf->fan2_enable) it8772f_enable_fan(res, 2); if (conf->fan3_enable) it8772f_enable_fan(res, 3); break; case IT8772F_GPIO: /* Set GPIO output levels */ res = find_resource(dev, PNP_IDX_IO1); if (res) { if (conf->gpio_set1) outb(conf->gpio_set1, res->base + 0); if (conf->gpio_set2) outb(conf->gpio_set2, res->base + 1); if (conf->gpio_set3) outb(conf->gpio_set3, res->base + 2); if (conf->gpio_set4) outb(conf->gpio_set4, res->base + 3); if (conf->gpio_set5) outb(conf->gpio_set5, res->base + 4); if (conf->gpio_set6) outb(conf->gpio_set6, res->base + 5); } break; case IT8772F_KBCK: if (!conf->skip_keyboard) { set_kbc_ps2_mode(); pc_keyboard_init(&conf->keyboard); } break; case IT8772F_KBCM: break; case IT8772F_IR: break; } } static void it8772f_pnp_set_resources(device_t dev) { pnp_enter_ext_func_mode(dev); pnp_set_resources(dev); pnp_exit_ext_func_mode(dev); } static void it8772f_pnp_enable_resources(device_t dev) { pnp_enter_ext_func_mode(dev); pnp_enable_resources(dev); pnp_exit_ext_func_mode(dev); } static void it8772f_pnp_enable(device_t dev) { pnp_enter_ext_func_mode(dev); pnp_set_logical_device(dev); pnp_set_enable(dev, !!dev->enabled); pnp_exit_ext_func_mode(dev); } static struct device_operations ops = { .read_resources = pnp_read_resources, .set_resources = it8772f_pnp_set_resources, .enable_resources = it8772f_pnp_enable_resources, .enable = it8772f_pnp_enable, .init = it8772f_init, }; static struct pnp_info pnp_dev_info[] = { /* Floppy Disk Controller */ { &ops, IT8772F_FDC, PNP_IO0 | PNP_IRQ0, {0x0ff8, 0}, }, /* Serial Port 1 */ { &ops, IT8772F_SP1, PNP_IO0 | PNP_IRQ0, {0x0ff8, 0}, }, /* Environmental Controller */ { &ops, IT8772F_EC, PNP_IO0 | PNP_IO1 | PNP_IRQ0, {0x0ff8, 0}, {0x0ffc, 4}, }, /* KBC Keyboard */ { &ops, IT8772F_KBCK, PNP_IO0 | PNP_IO1 | PNP_IRQ0, {0x0fff, 0}, {0x0fff, 4}, }, /* KBC Mouse */ { &ops, IT8772F_KBCM, PNP_IRQ0, }, /* 27 GPIOs */ { &ops, IT8772F_GPIO, PNP_IO0 | PNP_IO1, {0x0fff, 0}, {0x0ff8, 0}, }, /* Infrared */ { &ops, IT8772F_IR, PNP_IO0 | PNP_IRQ0, {0x0ff8, 0}, }, }; static void enable_dev(struct device *dev) { pnp_enable_devices(dev, &pnp_ops, ARRAY_SIZE(pnp_dev_info), pnp_dev_info); } struct chip_operations superio_ite_it8772f_ops = { CHIP_NAME("ITE IT8772F Super I/O") .enable_dev = enable_dev, };