/* * This file is part of the coreboot project. * * Copyright (C) 2003 Linux Networx * Copyright (C) 2003 SuSE Linux AG * Copyright (C) 2004 Tyan Computer * Written by Yinghai Lu for Tyan Computer. * Copyright (C) 2006,2007 AMD * Written by Yinghai Lu for AMD. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include "mcp55.h" #define NMI_OFF 0 // 0x7a or e3 #define PREVIOUS_POWER_STATE 0x7A #define MAINBOARD_POWER_OFF 0 #define MAINBOARD_POWER_ON 1 #define SLOW_CPU_OFF 0 #define SLOW_CPU__ON 1 #ifndef CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL #define CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL MAINBOARD_POWER_ON #endif static void lpc_common_init(device_t dev, int master) { uint8_t byte; uint32_t ioapic_base; /* IO APIC initialization */ byte = pci_read_config8(dev, 0x74); byte |= (1<<0); // enable APIC pci_write_config8(dev, 0x74, byte); ioapic_base = pci_read_config32(dev, PCI_BASE_ADDRESS_1); // 0x14 if (master) setup_ioapic(ioapic_base, 0); else clear_ioapic(ioapic_base); } static void lpc_slave_init(device_t dev) { lpc_common_init(dev, 0); } static void enable_hpet(struct device *dev) { unsigned long hpet_address; pci_write_config32(dev,0x44, 0xfed00001); hpet_address=pci_read_config32(dev,0x44)& 0xfffffffe; printk(BIOS_DEBUG, "enabling HPET @0x%lx\n", hpet_address); } static void lpc_init(device_t dev) { uint8_t byte; uint8_t byte_old; int on; int nmi_option; lpc_common_init(dev, 1); #if 0 /* posted memory write enable */ byte = pci_read_config8(dev, 0x46); pci_write_config8(dev, 0x46, byte | (1<<0)); #endif /* power after power fail */ #if 1 on = CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL; get_option(&on, "power_on_after_fail"); byte = pci_read_config8(dev, PREVIOUS_POWER_STATE); byte &= ~0x40; if (!on) { byte |= 0x40; } pci_write_config8(dev, PREVIOUS_POWER_STATE, byte); printk(BIOS_INFO, "set power %s after power fail\n", on?"on":"off"); #endif /* Throttle the CPU speed down for testing */ on = SLOW_CPU_OFF; get_option(&on, "slow_cpu"); if(on) { uint16_t pm10_bar; uint32_t dword; pm10_bar = (pci_read_config16(dev, 0x60)&0xff00); outl(((on<<1)+0x10) ,(pm10_bar + 0x10)); dword = inl(pm10_bar + 0x10); on = 8-on; printk(BIOS_DEBUG, "Throttling CPU %2d.%1.1d percent.\n", (on*12)+(on>>1),(on&1)*5); } #if 0 // default is enabled /* Enable Port 92 fast reset */ byte = pci_read_config8(dev, 0xe8); byte |= ~(1 << 3); pci_write_config8(dev, 0xe8, byte); #endif /* Enable Error reporting */ /* Set up sync flood detected */ byte = pci_read_config8(dev, 0x47); byte |= (1 << 1); pci_write_config8(dev, 0x47, byte); /* Set up NMI on errors */ byte = inb(0x70); // RTC70 byte_old = byte; nmi_option = NMI_OFF; get_option(&nmi_option, "nmi"); if (nmi_option) { byte &= ~(1 << 7); /* set NMI */ } else { byte |= ( 1 << 7); // Can not mask NMI from PCI-E and NMI_NOW } if( byte != byte_old) { outb(byte, 0x70); } /* Initialize the real time clock */ rtc_init(0); /* Initialize isa dma */ isa_dma_init(); /* Initialize the High Precision Event Timers */ enable_hpet(dev); } static void mcp55_lpc_read_resources(device_t dev) { struct resource *res; /* Get the normal PCI resources of this device. */ /* We got one for APIC, or one more for TRAP. */ pci_dev_read_resources(dev); /* Add an extra subtractive resource for both memory and I/O. */ res = new_resource(dev, IOINDEX_SUBTRACTIVE(0, 0)); res->base = 0; res->size = 0x1000; res->flags = IORESOURCE_IO | IORESOURCE_SUBTRACTIVE | IORESOURCE_ASSIGNED | IORESOURCE_FIXED; res = new_resource(dev, IOINDEX_SUBTRACTIVE(1, 0)); res->base = 0xff800000; res->size = 0x00800000; /* 8 MB for flash */ res->flags = IORESOURCE_MEM | IORESOURCE_SUBTRACTIVE | IORESOURCE_ASSIGNED | IORESOURCE_FIXED; res = new_resource(dev, 3); /* IOAPIC */ res->base = IO_APIC_ADDR; res->size = 0x00001000; res->flags = IORESOURCE_MEM | IORESOURCE_ASSIGNED | IORESOURCE_FIXED; } /** * @brief Enable resources for children devices * * @param dev the device whos children's resources are to be enabled * */ static void mcp55_lpc_enable_childrens_resources(device_t dev) { uint32_t reg, reg_var[4]; int i; int var_num = 0; struct bus *link; reg = pci_read_config32(dev, 0xa0); for (link = dev->link_list; link; link = link->next) { device_t child; for (child = link->children; child; child = child->sibling) { if(child->enabled && (child->path.type == DEVICE_PATH_PNP)) { struct resource *res; for(res = child->resource_list; res; res = res->next) { unsigned long base, end; // don't need long long if(!(res->flags & IORESOURCE_IO)) continue; base = res->base; end = resource_end(res); printk(BIOS_DEBUG, "mcp55 lpc decode:%s, base=0x%08lx, end=0x%08lx\n",dev_path(child),base, end); switch(base) { case 0x3f8: // COM1 reg |= (1<<0); break; case 0x2f8: // COM2 reg |= (1<<1); break; case 0x378: // Parallal 1 reg |= (1<<24); break; case 0x3f0: // FD0 reg |= (1<<20); break; case 0x220: // Aduio 0 reg |= (1<<8); break; case 0x300: // Midi 0 reg |= (1<<12); break; } if( (base == 0x290) || (base >= 0x400)) { if(var_num>=4) continue; // only 4 var ; compact them ? reg |= (1<<(28+var_num)); reg_var[var_num++] = (base & 0xffff)|((end & 0xffff)<<16); } } } } } pci_write_config32(dev, 0xa0, reg); for(i=0;i