/* * This file is part of the coreboot project. * * Copyright (C) 2008-2009 coresystems GmbH * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; version 2 of * the License. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ #include #include #include #include #include "i82801gx.h" typedef struct southbridge_intel_i82801gx_config config_t; static void ide_init(struct device *dev) { u16 ideTimingConfig; u32 reg32; u32 enable_primary, enable_secondary; /* Get the chip configuration */ config_t *config = dev->chip_info; printk(BIOS_DEBUG, "i82801gx_ide: initializing... "); if (config == NULL) { printk(BIOS_ERR, "\ni82801gx_ide: Not mentioned in devicetree.cb!\n"); // Trying to set somewhat safe defaults instead of bailing out. enable_primary = enable_secondary = 1; } else { enable_primary = config->ide_enable_primary; enable_secondary = config->ide_enable_secondary; } reg32 = pci_read_config32(dev, PCI_COMMAND); pci_write_config32(dev, PCI_COMMAND, reg32 | PCI_COMMAND_IO | PCI_COMMAND_MASTER); /* Native Capable, but not enabled. */ pci_write_config8(dev, 0x09, 0x8a); ideTimingConfig = pci_read_config16(dev, IDE_TIM_PRI); ideTimingConfig &= ~IDE_DECODE_ENABLE; ideTimingConfig |= IDE_SITRE; if (enable_primary) { /* Enable primary IDE interface. */ ideTimingConfig |= IDE_DECODE_ENABLE; ideTimingConfig |= (2 << 12); // ISP = 3 clocks ideTimingConfig |= (3 << 8); // RCT = 1 clock ideTimingConfig |= (1 << 1); // IE0 ideTimingConfig |= (1 << 0); // TIME0 printk(BIOS_DEBUG, "IDE0 "); } pci_write_config16(dev, IDE_TIM_PRI, ideTimingConfig); ideTimingConfig = pci_read_config16(dev, IDE_TIM_SEC); ideTimingConfig &= ~IDE_DECODE_ENABLE; ideTimingConfig |= IDE_SITRE; if (enable_secondary) { /* Enable secondary IDE interface. */ ideTimingConfig |= IDE_DECODE_ENABLE; ideTimingConfig |= (2 << 12); // ISP = 3 clocks ideTimingConfig |= (3 << 8); // RCT = 1 clock ideTimingConfig |= (1 << 1); // IE0 ideTimingConfig |= (1 << 0); // TIME0 printk(BIOS_DEBUG, "IDE1 "); } pci_write_config16(dev, IDE_TIM_SEC, ideTimingConfig); /* Set IDE I/O Configuration */ reg32 = 0; /* FIXME: only set FAST_* for ata/100, only ?CBx for ata/66 */ if (enable_primary) reg32 |= SIG_MODE_PRI_NORMAL | FAST_PCB0 | PCB0 | FAST_PCB1 | PCB1; if (enable_secondary) reg32 |= SIG_MODE_SEC_NORMAL | FAST_SCB0 | SCB0 | FAST_SCB1 | SCB1; pci_write_config32(dev, IDE_CONFIG, reg32); /* Set Interrupt Line */ /* Interrupt Pin is set by D31IP.PIP */ pci_write_config32(dev, INTR_LN, 0xff); /* Int 15 */ printk(BIOS_DEBUG, "\n"); } static void ide_set_subsystem(device_t dev, unsigned vendor, unsigned device) { if (!vendor || !device) { pci_write_config32(dev, PCI_SUBSYSTEM_VENDOR_ID, pci_read_config32(dev, PCI_VENDOR_ID)); } else { pci_write_config32(dev, PCI_SUBSYSTEM_VENDOR_ID, ((device & 0xffff) << 16) | (vendor & 0xffff)); } } static struct pci_operations ide_pci_ops = { .set_subsystem = ide_set_subsystem, }; static struct device_operations ide_ops = { .read_resources = pci_dev_read_resources, .set_resources = pci_dev_set_resources, .enable_resources = pci_dev_enable_resources, .init = ide_init, .scan_bus = 0, .enable = i82801gx_enable, .ops_pci = &ide_pci_ops, }; /* 82801GB/GR/GDH/GBM/GHM/GU (ICH7/ICH7R/ICH7DH/ICH7-M/ICH7-M DH/ICH7-U) */ static const struct pci_driver i82801gx_ide __pci_driver = { .ops = &ide_ops, .vendor = PCI_VENDOR_ID_INTEL, .device = 0x27df, };