Non-automatic IO-Addresses
--------------------------

The following dynamic IO BARs are used on the ICH7 for the Kontron Default BIOS:

GPIOBASE	0x480 (64 bytes)
PMBASE		0x800 (128 bytes)
SMBASE		0x400 (32 bytes)
HWMON		0xa00 (??)

The following dynamic IO BARs are used on the ICH7 for the Getac Default BIOS:

GPIOBASE	0x1180 (64 bytes)
PMBASE		0x1000 (128 bytes)
SMBASE		0x18e0 (32 bytes)

The Getac also needs an IO Trapped area of 0x0C bytes (defaults to 0x800)

coreboot:
GPIOBASE	0x480 (64 bytes)
PMBASE		0x500 (128 bytes)
SMBASE		0x400 (32 bytes)
HWMON		0xa00 (??)



NOTE: Coreboot sets the SMBASE to 0xf00 in auto.c. But it gets relocated 
in stage2 because its a "normal BAR" (to 0x2080 in one case here). 

This is not unhealthy but at least confusing. We should provide a method to
nail down certain resources for stage2. 

For a list of static I/O space allocation look at 6.3.1 of the ICH7 Family
Datasheet.