/* * This file is part of the coreboot project. * * Copyright (C) 2005 Tyan Computer * (Written by Yinghai Lu for Tyan Computer> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ #include #include #include #include #include "i82801bx.h" static void usb_ehci_init(struct device *dev) { /* TODO: Is any special init really needed? */ uint32_t cmd; printk(BIOS_DEBUG, "EHCI: Setting up controller.. "); cmd = pci_read_config32(dev, PCI_COMMAND); pci_write_config32(dev, PCI_COMMAND, cmd | PCI_COMMAND_MASTER); printk(BIOS_DEBUG, "done.\n"); } static void usb_ehci_set_subsystem(device_t dev, unsigned vendor, unsigned device) { uint8_t access_cntl; access_cntl = pci_read_config8(dev, 0x80); /* Enable writes to protected registers. */ pci_write_config8(dev, 0x80, access_cntl | 1); /* Write the subsystem vendor and device ID. */ pci_write_config32(dev, PCI_SUBSYSTEM_VENDOR_ID, ((device & 0xffff) << 16) | (vendor & 0xffff)); /* Restore protection. */ pci_write_config8(dev, 0x80, access_cntl); } static struct pci_operations lops_pci = { .set_subsystem = &usb_ehci_set_subsystem, }; static struct device_operations usb_ehci_ops = { .read_resources = pci_dev_read_resources, .set_resources = pci_dev_set_resources, .enable_resources = pci_dev_enable_resources, .init = usb_ehci_init, .scan_bus = 0, .enable = i82801bx_enable, .ops_pci = &lops_pci, }; /* 82801DB and 82801DBM */ static const struct pci_driver i82801db_usb_ehci __pci_driver = { .ops = &usb_ehci_ops, .vendor = PCI_VENDOR_ID_INTEL, .device = 0x24cd, }; /* 82801EB and 82801ER */ static const struct pci_driver i82801ex_usb_ehci __pci_driver = { .ops = &usb_ehci_ops, .vendor = PCI_VENDOR_ID_INTEL, .device = 0x24dd, };