/* * This file is part of the coreboot project. * * Copyright (C) 2008 Arastra, Inc. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA * */ /* This code is based on src/southbridge/intel/esb6300/esb6300_sata.c */ #include #include #include #include #include #include "i3100.h" typedef struct southbridge_intel_i3100_config config_t; static void sata_init(struct device *dev) { u8 ahci; u32 *ahci_bar; config_t *config = dev->chip_info; if (config == NULL) { printk(BIOS_ERR, "i3100_sata: error: device not in devicetree.cb!\n"); return; } /* Get the chip configuration */ ahci = (pci_read_config8(dev, SATA_MAP) >> 6) & 0x03; /* Enable SATA devices */ printk(BIOS_INFO, "SATA init (%s mode)\n", ahci ? "AHCI" : "Legacy"); if(ahci) { /* AHCI mode */ pci_write_config8(dev, SATA_MAP, (1 << 6) | (0 << 0)); /* Enable ports */ pci_write_config8(dev, SATA_PCS, 0x03); pci_write_config8(dev, SATA_PCS + 1, 0x0F); /* Setup timings */ pci_write_config16(dev, SATA_PTIM, 0x8000); pci_write_config16(dev, SATA_STIM, 0x8000); /* Synchronous DMA */ pci_write_config8(dev, SATA_SYNCC, 0); pci_write_config16(dev, SATA_SYNCTIM, 0); /* IDE I/O configuration */ pci_write_config32(dev, SATA_IIOC, 0); ahci_bar = (u32 *)(pci_read_config32(dev, 0x27) & ~0x3ff); ahci_bar[3] = config->sata_ports_implemented; } else { /* SATA configuration */ pci_write_config8(dev, SATA_CMD, 0x07); pci_write_config8(dev, SATA_PI, 0x8f); /* Set timings */ pci_write_config16(dev, SATA_PTIM, 0x0a307); pci_write_config16(dev, SATA_STIM, 0x0a307); /* Sync DMA */ pci_write_config8(dev, SATA_SYNCC, 0x0f); pci_write_config16(dev, SATA_SYNCTIM, 0x1111); /* Fast ATA */ pci_write_config16(dev, SATA_IIOC, 0x1000); /* Select IDE mode */ pci_write_config8(dev, SATA_MAP, 0x00); /* Enable ports 0-3 */ pci_write_config8(dev, SATA_PCS + 1, 0x0f); } /* secret init sequence, required */ pci_write_config32(dev, 0x94, 0x00400180); pci_write_config32(dev, 0xa0, 0x18); pci_write_config32(dev, 0xa4, 0x224); pci_write_config32(dev, 0xa0, 0x42); pci_write_config32(dev, 0xa4, 0x22006d); pci_write_config32(dev, 0xa0, 0x84); pci_write_config32(dev, 0xa4, 0x24); pci_write_config32(dev, 0xa0, 0x7a); pci_write_config32(dev, 0xa4, 0x220000); pci_write_config32(dev, 0xa0, 0x9c); pci_write_config32(dev, 0xa4, 0x24); pci_write_config32(dev, 0xa0, 0x90); pci_write_config32(dev, 0xa4, 0x220000); pci_write_config32(dev, 0xa0, 0xa0); pci_write_config32(dev, 0xa4, 0x12492aa); printk(BIOS_DEBUG, "SATA Enabled\n"); } static void sata_set_subsystem(device_t dev, unsigned vendor, unsigned device) { pci_write_config32(dev, PCI_SUBSYSTEM_VENDOR_ID, ((device & 0xffff) << 16) | (vendor & 0xffff)); } static struct pci_operations lops_pci = { .set_subsystem = sata_set_subsystem, }; static struct device_operations sata_ops = { .read_resources = pci_dev_read_resources, .set_resources = pci_dev_set_resources, .enable_resources = pci_dev_enable_resources, .init = sata_init, .scan_bus = 0, .enable = i3100_enable, .ops_pci = &lops_pci, }; static const struct pci_driver ide_driver __pci_driver = { .ops = &sata_ops, .vendor = PCI_VENDOR_ID_INTEL, .device = PCI_DEVICE_ID_INTEL_3100_IDE, }; static const struct pci_driver sata_driver __pci_driver = { .ops = &sata_ops, .vendor = PCI_VENDOR_ID_INTEL, .device = PCI_DEVICE_ID_INTEL_3100_AHCI, }; static const struct pci_driver ide_driver_ep80579 __pci_driver = { .ops = &sata_ops, .vendor = PCI_VENDOR_ID_INTEL, .device = PCI_DEVICE_ID_INTEL_EP80579_IDE, }; static const struct pci_driver sata_driver_ep80579 __pci_driver = { .ops = &sata_ops, .vendor = PCI_VENDOR_ID_INTEL, .device = PCI_DEVICE_ID_INTEL_EP80579_AHCI, };