/* * (C) 2003 Linux Networx */ #include #include #include #include #include #include #define NMI_OFF 0 static void pcix_init(device_t dev) { uint32_t dword; uint16_t word; uint8_t byte; int nmi_option; /* Enable memory write and invalidate ??? */ byte = pci_read_config8(dev, 0x04); byte |= 0x10; pci_write_config8(dev, 0x04, byte); /* Set drive strength */ word = pci_read_config16(dev, 0xe0); word = 0x0404; pci_write_config16(dev, 0xe0, word); word = pci_read_config16(dev, 0xe4); word = 0x0404; pci_write_config16(dev, 0xe4, word); /* Set impedance */ word = pci_read_config16(dev, 0xe8); word = 0x0404; pci_write_config16(dev, 0xe8, word); /* Set discard unrequested prefetch data */ word = pci_read_config16(dev, 0x4c); word |= 1; pci_write_config16(dev, 0x4c, word); /* Set split transaction limits */ word = pci_read_config16(dev, 0xa8); pci_write_config16(dev, 0xaa, word); word = pci_read_config16(dev, 0xac); pci_write_config16(dev, 0xae, word); /* Set up error reporting, enable all */ /* system error enable */ dword = pci_read_config32(dev, 0x04); dword |= (1<<8); pci_write_config32(dev, 0x04, dword); /* system and error parity enable */ dword = pci_read_config32(dev, 0x3c); dword |= (3<<16); pci_write_config32(dev, 0x3c, dword); /* NMI enable */ nmi_option = NMI_OFF; get_option(&nmi_option, "nmi"); if(nmi_option) { dword = pci_read_config32(dev, 0x44); dword |= (1<<0); pci_write_config32(dev, 0x44, dword); } /* Set up CRC flood enable */ dword = pci_read_config32(dev, 0xc0); if(dword) { /* do device A only */ dword = pci_read_config32(dev, 0xc4); dword |= (1<<1); pci_write_config32(dev, 0xc4, dword); dword = pci_read_config32(dev, 0xc8); dword |= (1<<1); pci_write_config32(dev, 0xc8, dword); } return; } static struct device_operations pcix_ops = { .read_resources = pci_bus_read_resources, .set_resources = pci_dev_set_resources, .enable_resources = pci_bus_enable_resources, .init = pcix_init, .scan_bus = pci_scan_bridge, }; static struct pci_driver pcix_driver __pci_driver = { .ops = &pcix_ops, .vendor = PCI_VENDOR_ID_AMD, .device = 0x7450, }; static void ioapic_enable(device_t dev) { uint32_t value; value = pci_read_config32(dev, 0x44); if (dev->enable) { value |= ((1 << 1) | (1 << 0)); } else { value &= ~((1 << 1) | (1 << 0)); } pci_write_config32(dev, 0x44, value); } static struct device_operations ioapic_ops = { .read_resources = pci_dev_read_resources, .set_resources = pci_dev_set_resources, .enable_resources = pci_dev_enable_resources, .init = 0, .scan_bus = 0, .enable = ioapic_enable, }; static struct pci_driver ioapic_driver __pci_driver = { .ops = &ioapic_ops, .vendor = PCI_VENDOR_ID_AMD, .device = 0x7451, };