##
## This file is part of the coreboot project.
##
## Copyright (C) 2009 One Laptop per Child, Association, Inc.
##
## This program is free software; you can redistribute it and/or modify
## it under the terms of the GNU General Public License as published by
## the Free Software Foundation; either version 2 of the License, or
## (at your option) any later version.
##
## This program is distributed in the hope that it will be useful,
## but WITHOUT ANY WARRANTY; without even the implied warranty of
## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
## GNU General Public License for more details.
##
## You should have received a copy of the GNU General Public License
## along with this program; if not, write to the Free Software
## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
##

uses CONFIG_HAVE_MP_TABLE
uses CONFIG_CBFS
uses CONFIG_HAVE_PIRQ_TABLE
uses CONFIG_USE_FALLBACK_IMAGE
uses CONFIG_HAVE_FALLBACK_BOOT
uses CONFIG_HAVE_HARD_RESET
uses CONFIG_HAVE_OPTION_TABLE
uses CONFIG_USE_OPTION_TABLE
uses CONFIG_ROM_PAYLOAD
uses CONFIG_IRQ_SLOT_COUNT
uses CONFIG_MAINBOARD
uses CONFIG_MAINBOARD_VENDOR
uses CONFIG_MAINBOARD_PART_NUMBER
uses COREBOOT_EXTRA_VERSION
uses CONFIG_ARCH
uses CONFIG_FALLBACK_SIZE
uses CONFIG_STACK_SIZE
uses CONFIG_HEAP_SIZE
uses CONFIG_ROM_SIZE
uses CONFIG_ROM_SECTION_SIZE
uses CONFIG_ROM_IMAGE_SIZE
uses CONFIG_ROM_SECTION_SIZE
uses CONFIG_ROM_SECTION_OFFSET
uses CONFIG_ROM_PAYLOAD_START
uses CONFIG_COMPRESSED_PAYLOAD_NRV2B
uses CONFIG_COMPRESSED_PAYLOAD_LZMA
uses CONFIG_PAYLOAD_SIZE
uses CONFIG_ROMBASE
uses CONFIG_RAMBASE
uses CONFIG_XIP_ROM_SIZE
uses CONFIG_XIP_ROM_BASE
uses CONFIG_HAVE_MP_TABLE
uses CONFIG_HAVE_ACPI_TABLES
uses CONFIG_CROSS_COMPILE
uses CC
uses HOSTCC
uses CONFIG_OBJCOPY
uses CONFIG_DEFAULT_CONSOLE_LOGLEVEL
uses CONFIG_MAXIMUM_CONSOLE_LOGLEVEL
uses CONFIG_CONSOLE_SERIAL8250
uses CONFIG_UDELAY_TSC
uses CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2
uses CONFIG_PCI_ROM_RUN
uses CONFIG_CONSOLE_VGA
uses CONFIG_MAX_PCI_BUSES
uses CONFIG_TTYS0_BAUD
uses CONFIG_VIDEO_MB
uses CONFIG_IOAPIC

## New options
uses CONFIG_USE_DCACHE_RAM
uses CONFIG_DCACHE_RAM_BASE
uses CONFIG_DCACHE_RAM_SIZE
uses CONFIG_USE_INIT
#uses MAX_RAM_SLOTS
#uses USB_ENABLE
#uses EHCI_ENABLE
#uses HPET_ENABLE
#uses USB_PORTNUM
#uses FULL_ROM_SIZE
#uses FULL_ROM_BASE
#uses PAYLOAD_IS_SEABIOS
#uses VIACONFIG_TOP_SM_SIZE_MB
#uses VIACONFIG_VGA_PCI_10
#uses VIACONFIG_VGA_PCI_14

## New options
default CONFIG_USE_DCACHE_RAM = 1
default CONFIG_DCACHE_RAM_BASE = 0xffef0000
# default CONFIG_DCACHE_RAM_BASE = 0xffbf0000
# default CONFIG_DCACHE_RAM_BASE = 0xfec00000 # HPET may use this.
default CONFIG_DCACHE_RAM_SIZE = 8 * 1024
default CONFIG_USE_INIT = 0
#default MAX_RAM_SLOTS = 2
#default USB_ENABLE = 1
#default EHCI_ENABLE = 1
#default HPET_ENABLE = 1
#default USB_PORTNUM = 2
#default FULL_ROM_SIZE = 512 * 1024
#default FULL_ROM_BASE = (0xffffffff - FULL_ROM_SIZE + 1)
#default VIACONFIG_TOP_SM_SIZE_MB = 0
# default VIACONFIG_VGA_PCI_10 = 0xd0000008
# default VIACONFIG_VGA_PCI_14 = 0xfd000000
#default VIACONFIG_VGA_PCI_10 = 0xf8000008
#default VIACONFIG_VGA_PCI_14 = 0xfc000000

default CONFIG_ROM_SIZE = 512 * 1024
default CONFIG_IOAPIC = 1

# Define framebuffer size of VX800's integrated graphics card.
# Supports: 32, 64, 128, 256.
default CONFIG_VIDEO_MB = 64

default CONFIG_CONSOLE_SERIAL8250 = 1
default CONFIG_PCI_ROM_RUN = 0
default CONFIG_CONSOLE_VGA = 0
default CONFIG_HAVE_FALLBACK_BOOT = 1
default CONFIG_HAVE_MP_TABLE = 0
default CONFIG_UDELAY_TSC = 1
default CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2 = 1
default CONFIG_HAVE_HARD_RESET = 0
default CONFIG_HAVE_PIRQ_TABLE = 0
default CONFIG_IRQ_SLOT_COUNT = 13
default CONFIG_HAVE_ACPI_TABLES = 1
default CONFIG_HAVE_OPTION_TABLE = 1
default CONFIG_ROM_IMAGE_SIZE = 128 * 1024
default CONFIG_FALLBACK_SIZE = CONFIG_ROM_SIZE
default CONFIG_USE_FALLBACK_IMAGE = 1
default CONFIG_STACK_SIZE = 16 * 1024
default CONFIG_HEAP_SIZE = 20 * 1024
# default CONFIG_USE_OPTION_TABLE = !CONFIG_USE_FALLBACK_IMAGE
default CONFIG_USE_OPTION_TABLE = 0
default CONFIG_RAMBASE = 0x00004000
default CONFIG_ROM_PAYLOAD = 1
default CONFIG_CROSS_COMPILE = ""
default CC = "$(CONFIG_CROSS_COMPILE)gcc -m32"
default HOSTCC = "gcc"
default CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 9
default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 9
default CONFIG_CBFS = 0

##
## Set this to the max PCI bus number you would ever use for PCI config I/O.
## Setting this number very high will make pci_locate_device() take a long
## time when it can't find a device.
##
default CONFIG_MAX_PCI_BUSES = 3

end