##
## This file is part of the coreboot project.
##
## Copyright (C) 2007 Kenji Noguchi <tokoy246@gmail.com>
##
## This program is free software; you can redistribute it and/or modify
## it under the terms of the GNU General Public License as published by
## the Free Software Foundation; either version 2 of the License, or
## (at your option) any later version.
##
## This program is distributed in the hope that it will be useful,
## but WITHOUT ANY WARRANTY; without even the implied warranty of
## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
## GNU General Public License for more details.
##
## You should have received a copy of the GNU General Public License
## along with this program; if not, write to the Free Software
## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
##

## CONFIG_XIP_ROM_SIZE must be a power of 2.
default CONFIG_XIP_ROM_SIZE = 64 * 1024
include /config/nofailovercalculation.lb

arch i386 end
driver mainboard.o
if CONFIG_GENERATE_PIRQ_TABLE
	object irq_tables.o
end
makerule ./failover.E
	depends "$(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c ../romcc"
	action "../romcc -E -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c -o $@"
end
makerule ./failover.inc
	depends "$(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c ../romcc"
	action "../romcc -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c -o $@"
end
makerule ./auto.E
	# depends	"$(CONFIG_MAINBOARD)/auto.c option_table.h ../romcc"
	depends	"$(CONFIG_MAINBOARD)/auto.c ../romcc"
	action	"../romcc -E -O -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/auto.c -o $@"
end
makerule ./auto.inc
	# depends "$(CONFIG_MAINBOARD)/auto.c option_table.h ../romcc"
	depends "$(CONFIG_MAINBOARD)/auto.c ../romcc"
	action	"../romcc -O -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/auto.c -o $@"
end
mainboardinit cpu/x86/16bit/entry16.inc
mainboardinit cpu/x86/32bit/entry32.inc
ldscript /cpu/x86/16bit/entry16.lds
ldscript /cpu/x86/32bit/entry32.lds
if CONFIG_USE_FALLBACK_IMAGE
	mainboardinit cpu/x86/16bit/reset16.inc
	ldscript /cpu/x86/16bit/reset16.lds
else
	mainboardinit cpu/x86/32bit/reset32.inc
	ldscript /cpu/x86/32bit/reset32.lds
end
mainboardinit arch/i386/lib/cpu_reset.inc
mainboardinit arch/i386/lib/id.inc
ldscript /arch/i386/lib/id.lds
if CONFIG_USE_FALLBACK_IMAGE
	ldscript /arch/i386/lib/failover.lds
	mainboardinit ./failover.inc
end
mainboardinit cpu/x86/fpu_enable.inc
mainboardinit cpu/amd/model_gx1/cpu_setup.inc
mainboardinit cpu/amd/model_gx1/gx_setup.inc
mainboardinit ./auto.inc

dir /pc80
config chip.h

chip northbridge/amd/gx1		# Northbridge
  device pci_domain 0 on		# PCI domain
    device pci 0.0 on end		# Host bridge
    chip southbridge/amd/cs5530		# Southbridge
      device pci 12.0 on		# ISA bridge
        chip superio/nsc/pc97317	# Super I/O
          device pnp 2e.0 on		# PS/2 keyboard
            io 0x60 = 0x60
            io 0x62 = 0x64
            irq 0x70 = 1
          end
          device pnp 2e.1 on		# PS/2 mouse
            irq 0x70 = 12
          end
          device pnp 2e.2 on		# RTC, Advanced power control (APC)
            io 0x60 = 0x70
            irq 0x70 = 8
          end
          device pnp 2e.3 off		# Floppy (N/A on this board)
            io 0x60 = 0x3f0
            irq 0x70 = 6
            drq 0x74 = 2
          end
          device pnp 2e.4 on		# Parallel port
            io 0x60 = 0x378
            irq 0x70 = 7
          end
          device pnp 2e.5 on		# COM2
            io 0x60 = 0x2f8
            irq 0x70 = 3
          end
          device pnp 2e.6 on		# COM1
            io 0x60 = 0x3f8
            irq 0x70 = 4
          end
          device pnp 2e.7 on		# GPIO
            io 0x60 = 0xe0
          end
          device pnp 2e.8 on		# Power management
            io 0x60 = 0xe8
          end
        end
      end
      device pci 12.1 off end		# SMI
      device pci 12.2 on end		# IDE
      device pci 12.3 on end		# Audio
      device pci 12.4 on end		# VGA (onboard)
      device pci 13.0 on end		# USB
      device pci 14.0 on end		# MiniPCI slot
      device pci 15.0 on end		# Ethernet (onboard)
      register "ide0_enable" = "1"
      register "ide1_enable" = "0"	# Not available/needed on this board
    end
  end
  chip cpu/amd/model_gx1		# CPU
  end
end