/*
 * This file is part of the coreboot project.
 *
 * Copyright (C) 2001 Eric W.Biederman<ebiderman@lnxi.com>
 *
 * Copyright (C) 2006 AMD
 * Written by Yinghai Lu <yinghailu@gmail.com> for AMD.
 *
 * Copyright (C) 2006 MSI
 * Written by bxshi <bingxunshi@gmail.com> for MSI.
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 2 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
 */

#include <console/console.h>
#include <arch/smp/mpspec.h>
#include <arch/io.h>
#include <device/pci.h>
#include <string.h>
#include <stdint.h>
#if CONFIG_LOGICAL_CPUS==1
#include <cpu/amd/multicore.h>
#endif
#include <cpu/amd/amdk8_sysconf.h>
#include "mb_sysconf.h"

static void *smp_write_config_table(void *v)
{
        struct mp_config_table *mc;

	int i, bus_isa;
	struct mb_sysconf_t *m;

        mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN);

	mptable_init(mc, LOCAL_APIC_ADDR);

        smp_write_processors(mc);

	get_bus_conf();
	m = sysconf.mb;

	mptable_write_buses(mc, NULL, &bus_isa);

/*I/O APICs:   APIC ID Version State           Address*/
        {
		device_t dev = 0;
               struct resource *res;
               for(i=0; i<3; i++) {
                       dev = dev_find_device(0x1166, 0x0235, dev);
                       if (dev) {
                               res = find_resource(dev, PCI_BASE_ADDRESS_0);
                               if (res) {
                                       smp_write_ioapic(mc, m->apicid_bcm5785[i], 0x11, res->base);
                               }
                       }
               }

       }

	mptable_add_isa_interrupts(mc, bus_isa, m->apicid_bcm5785[0], 0);

//IDE
       outb(0x02, 0xc00); outb(0x0e, 0xc01);

       smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH,  m->bus_bcm5785_0, ((1+sysconf.sbdn)<<2)|1, m->apicid_bcm5785[0], 0xe); // IDE

//SATA
       outb(0x07, 0xc00); outb(0x0f, 0xc01);
        smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_bcm5785_1, (0x0e<<2)|0, m->apicid_bcm5785[0], 0xf);

//USB
       outb(0x01, 0xc00); outb(0x0a, 0xc01);
        for(i=0;i<3;i++) {
                smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_bcm5785_0, ((2+sysconf.sbdn)<<2)|i, m->apicid_bcm5785[0], 0xa); //
        }



        /* enable int */
        /* why here? must get the BAR and PCI command bit 1 set before enable it ....*/
        {
                device_t dev;
                dev = dev_find_device(0x1166, 0x0205, 0);
                if(dev) {
                        uint32_t dword;
                        dword = pci_read_config32(dev, 0x6c);
                        dword |= (1<<4); // enable interrupts
                        pci_write_config32(dev, 0x6c, dword);
                }
                }

//First pci-x slot (on bcm5785) under bus_bcm5785_1:d.0
       // AIC 8130 Galileo Technology...
        for(i=0;i<4;i++) {
                smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_bcm5785_1_1, (6<<2)|i, m->apicid_bcm5785[1], 2 + (1+i)%4); //
        }


//pci slot (on bcm5785)
        for(i=0;i<4;i++) {
                smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_bcm5785_0, (5<<2)|i, m->apicid_bcm5785[1], 8+i%4); //
        }


//onboard ati
        smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_bcm5785_0, (4<<2)|0, m->apicid_bcm5785[1], 0x1);

//PCI-X on bcm5780
        for(i=0;i<4;i++) {
                smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_bcm5780[1], (4<<2)|i, m->apicid_bcm5785[1], 2 + (0+i)%4); //
        }

//onboard Broadcom
        for(i=0;i<2;i++) {
                smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_bcm5780[2], (4<<2)|i, m->apicid_bcm5785[1], 0xa + (0+i)%4); //
        }


// First PCI-E x8
        for(i=0;i<4;i++) {
                smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_bcm5780[5], (0<<2)|i, m->apicid_bcm5785[1], 0xe); //
        }


// Second PCI-E x8
        for(i=0;i<4;i++) {
                smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_bcm5780[3], (0<<2)|i, m->apicid_bcm5785[1], 0xc); //
        }

// Third PCI-E x1
        for(i=0;i<4;i++) {
                smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_bcm5780[4], (0<<2)|i, m->apicid_bcm5785[1], 0xd); //
        }

/*Local Ints:  Type    Polarity    Trigger     Bus ID   IRQ    APIC ID PIN#*/
       mptable_lintsrc(mc, bus_isa);
       /* There is no extension information... */

       /* Compute the checksums */
       return mptable_finalize(mc);
}

unsigned long write_smp_table(unsigned long addr)
{
       void *v;
       v = smp_write_floating_table(addr, 0);
       return (unsigned long)smp_write_config_table(v);
}