/* * This file is part of the coreboot project. * * Copyright (C) 2006 AMD * Written by Yinghai Lu for AMD. * * Copyright (C) 2006 MSI * Written by bxshi for MSI. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ /* This file was generated by getpir.c, do not modify! (but if you do, please run checkpir on it to verify) Contains the IRQ Routing Table dumped directly from your memory , wich BIOS sets up Documentation at : http://www.microsoft.com/hwdev/busbios/PCIIRQ.HTM */ #include #include #include #include #include #include #include "mb_sysconf.h" static void write_pirq_info(struct irq_info *pirq_info, uint8_t bus, uint8_t devfn, uint8_t link0, uint16_t bitmap0, uint8_t link1, uint16_t bitmap1, uint8_t link2, uint16_t bitmap2,uint8_t link3, uint16_t bitmap3, uint8_t slot, uint8_t rfu) { pirq_info->bus = bus; pirq_info->devfn = devfn; pirq_info->irq[0].link = link0; pirq_info->irq[0].bitmap = bitmap0; pirq_info->irq[1].link = link1; pirq_info->irq[1].bitmap = bitmap1; pirq_info->irq[2].link = link2; pirq_info->irq[2].bitmap = bitmap2; pirq_info->irq[3].link = link3; pirq_info->irq[3].bitmap = bitmap3; pirq_info->slot = slot; pirq_info->rfu = rfu; } extern void get_bus_conf(void); unsigned long write_pirq_routing_table(unsigned long addr) { struct irq_routing_table *pirq; struct irq_info *pirq_info; unsigned slot_num; uint8_t *v; uint8_t sum=0; int i; struct mb_sysconf_t *m; get_bus_conf(); m = sysconf.mb; /* Align the table to be 16 byte aligned. */ addr += 15; addr &= ~15; /* This table must be betweeen 0xf0000 & 0x100000 */ printk(BIOS_INFO, "Writing IRQ routing tables to 0x%x...", addr); pirq = (void *)(addr); v = (uint8_t *)(addr); pirq->signature = PIRQ_SIGNATURE; pirq->version = PIRQ_VERSION; pirq->rtr_bus = m->bus_bcm5785_0; pirq->rtr_devfn = (sysconf.sbdn<<3)|0; pirq->exclusive_irqs = 0; pirq->rtr_vendor = 0x1166; pirq->rtr_device = 0x0036; pirq->miniport_data = 0; memset(pirq->rfu, 0, sizeof(pirq->rfu)); pirq_info = (void *) ( &pirq->checksum + 1); slot_num = 0; //pci bridge write_pirq_info(pirq_info, m->bus_bcm5785_0, (sysconf.sbdn<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0); pirq_info++; slot_num++; pirq->size = 32 + 16 * slot_num; for (i = 0; i < pirq->size; i++) sum += v[i]; sum = pirq->checksum - sum; if (sum != pirq->checksum) { pirq->checksum = sum; } printk(BIOS_INFO, "done.\n"); return (unsigned long) pirq_info; }