/*
 * This file is part of the coreboot project.
 *
 * Copyright (C) 2007 AMD
 * Written by Yinghai Lu <yinghailu@amd.com> for AMD.
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 2 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
 */

#include <console/console.h>
#include <device/pci.h>
#include <device/pci_ids.h>
#include <string.h>
#include <stdint.h>
#if CONFIG_LOGICAL_CPUS==1
#include <cpu/amd/multicore.h>
#endif
#include <cpu/amd/amdk8_sysconf.h>
#include <stdlib.h>

/* Global variables for MB layouts (shared by irqtable/mptable/acpi_table). */
// busnum is default.
unsigned char bus_mcp55[8];	// 1
unsigned apicid_mcp55;

unsigned pci1234x[] = {
	/* Here you only need to set value in pci1234 for HT-IO that could
	 * be installed or not. You may need to preset pci1234 for HTIO board,
	 * please refer to * src/northbridge/amd/amdk8/get_sblk_pci1234.c.
	 */
	0x0000ff0,
//      0x0000ff0,
//      0x0000ff0,
//      0x0000ff0,
//      0x0000ff0,
//      0x0000ff0,
//      0x0000ff0,
//      0x0000ff0
};

unsigned hcdnx[] = {
	/* HT Chain device num, actually it is unit id base of every ht
	 * device in chain, assume every chain only have 4 ht device at most.
	 */
	0x20202020,
//      0x20202020,
//      0x20202020,
//      0x20202020,
//      0x20202020,
//      0x20202020,
//      0x20202020,
//      0x20202020,
};

static unsigned get_bus_conf_done = 0;

void get_bus_conf(void)
{
	unsigned int apicid_base, sbdn;
	device_t dev;
	int i;

	if (get_bus_conf_done == 1)
		return;		/* Do it only once. */

	get_bus_conf_done = 1;

	sysconf.hc_possible_num = ARRAY_SIZE(pci1234x);
	for (i = 0; i < sysconf.hc_possible_num; i++) {
		sysconf.pci1234[i] = pci1234x[i];
		sysconf.hcdn[i] = hcdnx[i];
	}

	get_sblk_pci1234();

	sysconf.sbdn = (sysconf.hcdn[0] & 0xff); /* First byte of first chain */
	sbdn = sysconf.sbdn;

	for (i = 0; i < 8; i++)
		bus_mcp55[i] = 0;

	bus_mcp55[0] = (sysconf.pci1234[0] >> 16) & 0xff;

	/* MCP55 */
	dev = dev_find_slot(bus_mcp55[0], PCI_DEVFN(sbdn + 0x06, 0));
	if (dev) {
		bus_mcp55[1] = pci_read_config8(dev, PCI_SECONDARY_BUS);
		bus_mcp55[2] = pci_read_config8(dev, PCI_SUBORDINATE_BUS);
		bus_mcp55[2]++;
	} else {
		printk
		    (BIOS_DEBUG, "ERROR - could not find PCI 1:%02x.0, using defaults\n",
		     sbdn + 0x06);

		bus_mcp55[1] = 2;
		bus_mcp55[2] = 3;
	}

	for (i = 2; i < 8; i++) {
		dev = dev_find_slot(bus_mcp55[0],
				    PCI_DEVFN(sbdn + 0x0a + i - 2, 0));
		if (dev) {
			bus_mcp55[i] = pci_read_config8(dev, PCI_SECONDARY_BUS);
		}
	}

/* I/O APICs:	APIC ID	Version	State		Address */
#if CONFIG_LOGICAL_CPUS==1
	apicid_base = get_apicid_base(1);
#else
	apicid_base = CONFIG_MAX_PHYSICAL_CPUS;
#endif
	apicid_mcp55 = apicid_base + 0;
}