# sample config for advansus/A785E-I chip northbridge/amd/amdfam10/root_complex device lapic_cluster 0 on chip cpu/amd/socket_AM3 #L1 and DDR3 device lapic 0 on end end end device pci_domain 0 on subsystemid 0x1043 0x843e inherit #TODO: Set the correctly subsystem id. chip northbridge/amd/amdfam10 device pci 18.0 on # northbridge chip southbridge/amd/rs780 device pci 0.0 on end # HT 0x9600 device pci 2.0 on end # PCIE P2P bridge (external graphics) 0x9603 device pci 3.0 off end # PCIE P2P bridge 0x960b device pci 4.0 on end # PCIE P2P bridge 0x9604 wireless device pci 5.0 off end # PCIE P2P bridge 0x9605 device pci 6.0 off end # PCIE P2P bridge 0x9606 device pci 7.0 off end # PCIE P2P bridge 0x9607 device pci 8.0 off end # NB/SB Link P2P bridge device pci 9.0 on end # Ethernet device pci a.0 on end # Ethernet register "gppsb_configuration" = "4" # Configuration E register "gpp_configuration" = "3" # Configuration D register "port_enable" = "0x6f6" register "gfx_dev2_dev3" = "0" register "gfx_dual_slot" = "0" register "gfx_lane_reversal" = "0" register "gfx_compliance" = "0" register "gfx_reconfiguration" = "1" register "gfx_link_width" = "0" register "gfx_tmds" = "1" register "gfx_pcie_config" = "3" # 1x8 GFX on Lanes 8-15 register "gfx_ddi_config" = "1" # Lanes 0-3 DDI_SL end chip southbridge/amd/cimx/sb900 # it is under NB/SB Link, but on the same pci bus device pci 11.0 on end # SATA device pci 12.0 on end # USB device pci 12.2 on end # USB device pci 13.0 on end # USB device pci 13.2 on end # USB device pci 14.0 on # SM chip drivers/generic/generic #dimm 0-0-0 device i2c 50 on end end chip drivers/generic/generic #dimm 0-0-1 device i2c 51 on end end chip drivers/generic/generic #dimm 0-1-0 device i2c 52 on end end chip drivers/generic/generic #dimm 0-1-1 device i2c 53 on end end end # SM device pci 14.1 on end # IDE 0x439c device pci 14.2 on end # HDA 0x4383 device pci 14.3 on chip superio/ite/it8721f device pnp 2e.0 off # Floppy io 0x60 = 0x3f0 irq 0x70 = 6 drq 0x74 = 2 end device pnp 2e.1 off # Parallel Port io 0x60 = 0x378 irq 0x70 = 7 end device pnp 2e.2 on # Com1 io 0x60 = 0x3f8 irq 0x70 = 4 end device pnp 2e.3 on # Com2 io 0x60 = 0x2f8 irq 0x70 = 3 end device pnp 2e.5 on # Keyboard io 0x60 = 0x60 io 0x62 = 0x64 irq 0x70 = 1 irq 0x72 = 12 end device pnp 2e.6 off # SFI io 0x62 = 0x100 end device pnp 2e.7 off # GPIO_GAME_MIDI io 0x60 = 0x220 io 0x62 = 0x300 irq 0x70 = 9 end device pnp 2e.8 off end # WDTO_PLED device pnp 2e.9 off end # GPIO_SUSLED device pnp 2e.a off end # ACPI device pnp 2e.b on # HW Monitor io 0x60 = 0x290 irq 0x70 = 5 end end #superio/winbond/w83627hf end # LPC 0x439d device pci 14.4 off end # PCIB 0x4384, NOTE: PCI interface pins shared with GPIO {GPIO 35:0} device pci 14.5 on end # USB 2 device pci 14.6 off end # Gec device pci 15.0 on end # PCIe 0 device pci 15.1 on end # PCIe 1 device pci 15.2 on end # PCIe 2 device pci 15.3 on end # PCIe 3 device pci 16.0 on end # USB device pci 16.2 on end # USB #register "gpp_configuration" = "0" #4:0:0:0 #register "gpp_configuration" = "2" #2:2:0:0 #register "gpp_configuration" = "3" #2:1:1:0 register "gpp_configuration" = "4" #1:1:1:1 register "boot_switch_sata_ide" = "0" # 0: boot from SATA. 1: IDE end #southbridge/amd/cimx/sb800 end # device pci 18.0 device pci 18.1 on end device pci 18.2 on end device pci 18.3 on end device pci 18.4 on end end end #pci_domain end