uses HAVE_MP_TABLE uses HAVE_PIRQ_TABLE uses USE_FALLBACK_IMAGE uses MAINBOARD uses ARCH uses FALLBACK_SIZE uses ROM_SIZE uses ROM_SECTION_SIZE uses ROM_IMAGE_SIZE uses ROM_SECTION_SIZE uses ROM_SECTION_OFFSET uses CONFIG_ROM_STREAM_START uses PAYLOAD_SIZE uses _ROMBASE uses XIP_ROM_SIZE uses XIP_ROM_BASE ### ### Build options ### ## ## Build code for the fallback boot ## option HAVE_FALLBACK_BOOT=1 ## ## Build code to reset the motherboard from linuxBIOS ## option HAVE_HARD_RESET=1 ## ## Build code to export a programmable irq routing table ## option HAVE_PIRQ_TABLE=1 option IRQ_SLOT_COUNT=7 ## ## Build code to export an x86 MP table ## Useful for specifying IRQ routing values ## option HAVE_MP_TABLE=1 ## ## Build code to export a CMOS option table ## option HAVE_OPTION_TABLE=1 ## ## AMD Solo is a 1cpu board ## option CONFIG_SMP=0 option CONFIG_MAX_CPUS=1 ## ## Build code to setup a generic IOAPIC ## option CONFIG_IOAPIC=1 ## ## Clean up the motherboard id strings ## option MAINBOARD_PART_NUMBER="SOLO7" option MAINBOARD_VENDOR="AMD" ### ### LinuxBIOS layout values ### ## ROM_SIZE is the size of boot ROM that this board will use. option ROM_SIZE = 262144 ## ROM_IMAGE_SIZE is the amount of space to allow linuxBIOS to occupy. option ROM_IMAGE_SIZE = 65536 ## ## Use a small 8K stack ## option STACK_SIZE=0x2000 ## ## Use a small 16K heap ## option HEAP_SIZE=0x4000 ## ## Only use the option table in a normal image ## option USE_OPTION_TABLE = !USE_FALLBACK_IMAGE ## ## Compute the location and size of where this firmware image ## (linuxBIOS plus bootloader) will live in the boot rom chip. ## if USE_FALLBACK_IMAGE option ROM_SECTION_SIZE = FALLBACK_SIZE option ROM_SECTION_OFFSET = ( ROM_SIZE - FALLBACK_SIZE ) else option ROM_SECTION_SIZE = ( ROM_SIZE - FALLBACK_SIZE ) option ROM_SECTION_OFFSET = 0 end ## ## Compute the start location and size size of ## The linuxBIOS bootloader. ## option PAYLOAD_SIZE = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE ) option CONFIG_ROM_STREAM_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1) option CONFIG_ROM_STREAM = 1 ## ## Compute where this copy of linuxBIOS will start in the boot rom ## option _ROMBASE = ( CONFIG_ROM_STREAM_START + PAYLOAD_SIZE ) ## ## Compute a range of ROM that can cached to speed up linuxBIOS, ## execution speed. ## ## XIP_ROM_SIZE must be a power of 2. ## XIP_ROM_BASE must be a multiple of XIP_ROM_SIZE ## option XIP_ROM_SIZE=65536 option XIP_ROM_BASE = ( _ROMBASE + ROM_IMAGE_SIZE - XIP_ROM_SIZE ) ## ## Set all of the defaults for an x86 architecture ## arch i386 end #cpu k8 end ## ## Build the objects we have code for in this directory. ## #object mainboard.o driver mainboard.o #object static_devices.o if HAVE_MP_TABLE object mptable.o end if HAVE_PIRQ_TABLE object irq_tables.o end object reset.o ## ## Romcc output ## makerule ./failover.E depends "$(MAINBOARD)/failover.c" action "$(CPP) -I$(TOP)/src $(ROMCCPPFLAGS) $(CPPFLAGS) $(MAINBOARD)/failover.c > ./failover.E" end makerule ./failover.inc depends "./failover.E ./romcc" action "./romcc -O -o failover.inc --label-prefix=failover ./failover.E" end makerule ./auto.E depends "$(MAINBOARD)/auto.c" action "$(CPP) -I$(TOP)/src $(ROMCCPPFLAGS) $(CPPFLAGS) $(MAINBOARD)/auto.c > ./auto.E" end makerule ./auto.inc depends "./auto.E ./romcc" action "./romcc -mcpu=k8 -O ./auto.E > auto.inc" end ## ## Build our 16 bit and 32 bit linuxBIOS entry code ## mainboardinit cpu/i386/entry16.inc mainboardinit cpu/i386/entry32.inc ldscript /cpu/i386/entry16.lds ldscript /cpu/i386/entry32.lds ## ## Build our reset vector (This is where linuxBIOS is entered) ## if USE_FALLBACK_IMAGE mainboardinit cpu/i386/reset16.inc ldscript /cpu/i386/reset16.lds else mainboardinit cpu/i386/reset32.inc ldscript /cpu/i386/reset32.lds end ### Should this be in the northbridge code? mainboardinit arch/i386/lib/cpu_reset.inc ## ## Include an id string (For safe flashing) ## mainboardinit arch/i386/lib/id.inc ldscript /arch/i386/lib/id.lds ## ## Setup our mtrrs ## mainboardinit cpu/k8/earlymtrr.inc ### ### This is the early phase of linuxBIOS startup ### Things are delicate and we test to see if we should ### failover to another image. ### if USE_FALLBACK_IMAGE ldscript /arch/i386/lib/failover.lds mainboardinit ./failover.inc end ### ### O.k. We aren't just an intermediary anymore! ### ## ## Setup RAM ## mainboardinit cpu/k8/enable_mmx_sse.inc mainboardinit ./auto.inc mainboardinit cpu/k8/disable_mmx_sse.inc ## ## Include the secondary Configuration files ## dir /pc80 config chip.h northbridge amd/amdk8 "mc0" pci 0:18.0 pci 0:18.0 pci 0:18.0 pci 0:18.1 pci 0:18.2 pci 0:18.3 southbridge amd/amd8111 "amd8111" pci 0:0.0 pci 0:1.0 pci 0:1.1 pci 0:1.2 pci 0:1.3 pci 0:1.5 pci 0:1.6 superio NSC/pc87360 pnp 1:2e.0 pnp 1:2e.1 pnp 1:2e.2 pnp 1:2e.3 pnp 1:2e.4 pnp 1:2e.5 pnp 1:2e.6 pnp 1:2e.7 pnp 1:2e.8 pnp 1:2e.9 pnp 1:2e.a register "com1" = "{1, 0, 0x3f8, 4}" register "lpt" = "{1}" end end southbridge amd/amd8151 "amd8151" pci 0:0.0 pci 0:1.0 end end cpu k8 "cpu0" register "up" = "{ .chip = &amd8111, .ht_width=16, .ht_speed=600 }" end ## ## Include the old serial code for those few places that still need it. ## mainboardinit pc80/serial.inc mainboardinit arch/i386/lib/console.inc