uses HAVE_MP_TABLE
uses HAVE_PIRQ_TABLE
uses USE_FALLBACK_IMAGE
uses MAINBOARD
uses ARCH
uses FALLBACK_SIZE
uses ROM_SIZE
uses ROM_SECTION_SIZE
uses ROM_IMAGE_SIZE
uses ROM_SECTION_SIZE
uses ROM_SECTION_OFFSET
uses CONFIG_ROM_STREAM_START
uses PAYLOAD_SIZE
uses _ROMBASE
uses XIP_ROM_SIZE
uses XIP_ROM_BASE

## ROM_SIZE is the size of boot ROM that this board will use.
default ROM_SIZE 524288

###
### Build options
###

##
## Build code for the fallback boot
##
option HAVE_FALLBACK_BOOT=1

##
## Build code to reset the motherboard from linuxBIOS
##
option HAVE_HARD_RESET=0

##
## Build code to export a programmable irq routing table
##
option HAVE_PIRQ_TABLE=1
option IRQ_SLOT_COUNT=7

##
## Build code to export an x86 MP table
## Useful for specifying IRQ routing values
##
option HAVE_MP_TABLE=1

##
## Build code to export a CMOS option table
##
option HAVE_OPTION_TABLE=1

##
## AMD Solo is a 1cpu board 
##
option CONFIG_SMP=0
option CONFIG_MAX_CPUS=1

##
## Build code to setup a generic IOAPIC
##
option CONFIG_IOAPIC=1

##
## Clean up the motherboard id strings
##
option MAINBOARD_PART_NUMBER="SOLO7"
option MAINBOARD_VENDOR="AMD"

###
### LinuxBIOS layout values
###

## ROM_IMAGE_SIZE is the amount of space to allow linuxBIOS to occupy.
option ROM_IMAGE_SIZE = 65536

##
## Use a small 8K stack
##
option STACK_SIZE=0x2000

##
## Use a small 16K heap
##
option HEAP_SIZE=0x4000

##
## Only use the option table in a normal image
##
option USE_OPTION_TABLE = !USE_FALLBACK_IMAGE

##
## Compute the location and size of where this firmware image
## (linuxBIOS plus bootloader) will live in the boot rom chip.
##
if USE_FALLBACK_IMAGE
	option ROM_SECTION_SIZE   = FALLBACK_SIZE
	option ROM_SECTION_OFFSET = ( ROM_SIZE - FALLBACK_SIZE )
else
	option ROM_SECTION_SIZE   = ( ROM_SIZE - FALLBACK_SIZE )
	option ROM_SECTION_OFFSET = 0
end

##
## Compute the start location and size size of
## The linuxBIOS bootloader.
##
option PAYLOAD_SIZE            = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE )
option CONFIG_ROM_STREAM_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1)
option CONFIG_ROM_STREAM     = 1

##
## Compute where this copy of linuxBIOS will start in the boot rom
##
option _ROMBASE      = ( CONFIG_ROM_STREAM_START + PAYLOAD_SIZE )

##
## Compute a range of ROM that can cached to speed up linuxBIOS,
## execution speed.
##
## XIP_ROM_SIZE must be a power of 2.
## XIP_ROM_BASE must be a multiple of XIP_ROM_SIZE
##
option XIP_ROM_SIZE=65536
option XIP_ROM_BASE = ( _ROMBASE + ROM_IMAGE_SIZE - XIP_ROM_SIZE )

##
## Set all of the defaults for an x86 architecture
##

arch i386 end
#cpu k8 end

##
## Build the objects we have code for in this directory.
##

#object mainboard.o
driver mainboard.o
#object static_devices.o
if HAVE_MP_TABLE object mptable.o end
if HAVE_PIRQ_TABLE object irq_tables.o end
object reset.o

##
## Romcc output
##
makerule ./failover.E
	depends "$(MAINBOARD)/failover.c" 
	action "$(CPP) -I$(TOP)/src $(ROMCCPPFLAGS) $(CPPFLAGS) $(MAINBOARD)/failover.c > ./failover.E"
end

makerule ./failover.inc
	depends "./failover.E ./romcc"
	action "./romcc -O -o failover.inc --label-prefix=failover ./failover.E"
end

makerule ./auto.E 
	depends	"$(MAINBOARD)/auto.c" 
	action	"$(CPP) -I$(TOP)/src $(ROMCCPPFLAGS) $(CPPFLAGS) $(MAINBOARD)/auto.c > ./auto.E"
end
makerule ./auto.inc 
	depends "./auto.E ./romcc"
	action	"./romcc -mcpu=k8  -O ./auto.E > auto.inc"
end

##
## Build our 16 bit and 32 bit linuxBIOS entry code
##
mainboardinit cpu/i386/entry16.inc
mainboardinit cpu/i386/entry32.inc
ldscript /cpu/i386/entry16.lds
ldscript /cpu/i386/entry32.lds

##
## Build our reset vector (This is where linuxBIOS is entered)
##
if USE_FALLBACK_IMAGE 
	mainboardinit cpu/i386/reset16.inc 
	ldscript /cpu/i386/reset16.lds 
else
	mainboardinit cpu/i386/reset32.inc 
	ldscript /cpu/i386/reset32.lds 
end

### Should this be in the northbridge code?
mainboardinit arch/i386/lib/cpu_reset.inc

##
## Include an id string (For safe flashing)
##
mainboardinit arch/i386/lib/id.inc
ldscript /arch/i386/lib/id.lds

##
## Setup our mtrrs
##
mainboardinit cpu/k8/earlymtrr.inc

###
### This is the early phase of linuxBIOS startup 
### Things are delicate and we test to see if we should
### failover to another image.
###
if USE_FALLBACK_IMAGE
	ldscript /arch/i386/lib/failover.lds 
	mainboardinit ./failover.inc
end

###
### O.k. We aren't just an intermediary anymore!
###

##
## Setup RAM
##
mainboardinit cpu/k8/enable_mmx_sse.inc
mainboardinit ./auto.inc
mainboardinit cpu/k8/disable_mmx_sse.inc

##
## Include the secondary Configuration files 
##
dir /pc80
config chip.h

northbridge amd/amdk8 "mc0"
	pci 0:18.0
	pci 0:18.0
	pci 0:18.0
	pci 0:18.1
	pci 0:18.2
	pci 0:18.3
	southbridge amd/amd8111 "amd8111"
		pci 0:0.0
		pci 0:1.0
		pci 0:1.1
		pci 0:1.2
		pci 0:1.3
		pci 0:1.5
		pci 0:1.6
		superio NSC/pc87360
			pnp 1:2e.0
			pnp 1:2e.1
			pnp 1:2e.2
			pnp 1:2e.3
			pnp 1:2e.4
			pnp 1:2e.5
			pnp 1:2e.6
			pnp 1:2e.7
			pnp 1:2e.8
			pnp 1:2e.9
			pnp 1:2e.a
			register "com1" = "{1, 0, 0x3f8, 4}"
			register "lpt" = "{1}"
		end
	end
	southbridge amd/amd8151 "amd8151"
		pci 0:0.0
		pci 0:1.0
	end
end

cpu k8 "cpu0"
	register "up" = "{ .chip = &amd8111, .ht_width=16, .ht_speed=600 }"
end

##
## Include the old serial code for those few places that still need it.
##
mainboardinit pc80/serial.inc
mainboardinit arch/i386/lib/console.inc