menu "Console options" # TODO: Rename to SERIAL_CONSOLE once Kconfig transition is complete. config CONSOLE_SERIAL8250 bool "Serial port console output" default y help Send coreboot debug output to a serial port console. choice prompt "Serial port" default CONSOLE_SERIAL_COM1 depends on CONSOLE_SERIAL8250 config CONSOLE_SERIAL_COM1 bool "COM1/ttyS0, I/O port 0x3f8" help Serial console on COM1/ttyS0 at I/O port 0x3f8. config CONSOLE_SERIAL_COM2 bool "COM2/ttyS1, I/O port 0x2f8" help Serial console on COM2/ttyS1 at I/O port 0x2f8. config CONSOLE_SERIAL_COM3 bool "COM3/ttyS2, I/O port 0x3e8" help Serial console on COM3/ttyS2 at I/O port 0x3e8. config CONSOLE_SERIAL_COM4 bool "COM4/ttyS3, I/O port 0x2e8" help Serial console on COM4/ttyS3 at I/O port 0x2e8. endchoice config TTYS0_BASE hex depends on CONSOLE_SERIAL8250 default 0x3f8 if CONSOLE_SERIAL_COM1 default 0x2f8 if CONSOLE_SERIAL_COM2 default 0x3e8 if CONSOLE_SERIAL_COM3 default 0x2e8 if CONSOLE_SERIAL_COM4 help Map the COM port names to the respective I/O port. choice prompt "Baud rate" default CONSOLE_SERIAL_115200 depends on CONSOLE_SERIAL8250 config CONSOLE_SERIAL_115200 bool "115200" help Set serial port Baud rate to 115200. config CONSOLE_SERIAL_57600 bool "57600" help Set serial port Baud rate to 57600. config CONSOLE_SERIAL_38400 bool "38400" help Set serial port Baud rate to 38400. config CONSOLE_SERIAL_19200 bool "19200" help Set serial port Baud rate to 19200. config CONSOLE_SERIAL_9600 bool "9600" help Set serial port Baud rate to 9600. endchoice config TTYS0_BAUD int default 115200 if CONSOLE_SERIAL_115200 default 57600 if CONSOLE_SERIAL_57600 default 38400 if CONSOLE_SERIAL_38400 default 19200 if CONSOLE_SERIAL_19200 default 9600 if CONSOLE_SERIAL_9600 help Map the Baud rates to an integer. # TODO: Allow user-friendly selection of settings other than 8n1. config TTYS0_LCS int default 3 depends on CONSOLE_SERIAL8250 # Use "select HAVE_USBDEBUG" on southbridges which have Debug Port code. config HAVE_USBDEBUG def_bool n config USBDEBUG def_bool n config USBDEBUG bool "USB 2.0 EHCI debug dongle support" default n depends on HAVE_USBDEBUG help This option allows you to use a so-called USB EHCI Debug device (such as the Ajays NET20DC, AMIDebug RX, or a system using the Linux "EHCI Debug Device gadget" driver found in recent kernel) to retrieve the coreboot debug messages (instead, or in addition to, a serial port). This feature is NOT supported on all chipsets in coreboot! It also requires a USB2 controller which supports the EHCI Debug Port capability. See http://www.coreboot.org/EHCI_Debug_Port for an up-to-date list of supported controllers. If unsure, say N. config CONSOLE_VGA bool "Use VGA console once initialized" default n # TODO: Deps? # TODO: Improve description. config CONSOLE_VGA_ONBOARD_AT_FIRST bool "Use onboard VGA as primary video device" default n help If not selected, the last adapter found will be used. config CONSOLE_NE2K bool "Network console over NE2000 compatible Ethernet adapter" default n help Send coreboot debug output to a Ethernet console, it works same way as Linux netconsole, packets are received to UDP port 6666 on IP/MAC specified with options bellow. Use following netcat command: nc -u -l -p 6666 config CONSOLE_NE2K_DST_MAC depends on CONSOLE_NE2K string "Destination MAC address of remote system" default "00:13:d4:76:a2:ac" help Type in either MAC address of logging system or MAC address of the router. config CONSOLE_NE2K_DST_IP depends on CONSOLE_NE2K string "Destination IP of logging system" default "10.0.1.27" help This is IP adress of the system running for example netcat command to dump the packets. config CONSOLE_NE2K_SRC_IP depends on CONSOLE_NE2K string "IP address of coreboot system" default "10.0.1.253" help This is the IP of the coreboot system config CONSOLE_NE2K_IO_PORT depends on CONSOLE_NE2K hex "NE2000 adapter fixed IO port address" default 0xe00 help This is the IO port address for the IO port on the card, please select some non-conflicting region, 32 bytes of IO spaces will be used (and align on 32 bytes boundary, qemu needs broader align) choice prompt "Maximum console log level" default MAXIMUM_CONSOLE_LOGLEVEL_8 config MAXIMUM_CONSOLE_LOGLEVEL_8 bool "8: SPEW" help Way too many details. config MAXIMUM_CONSOLE_LOGLEVEL_7 bool "7: DEBUG" help Debug-level messages. config MAXIMUM_CONSOLE_LOGLEVEL_6 bool "6: INFO" help Informational messages. config MAXIMUM_CONSOLE_LOGLEVEL_5 bool "5: NOTICE" help Normal but significant conditions. config MAXIMUM_CONSOLE_LOGLEVEL_4 bool "4: WARNING" help Warning conditions. config MAXIMUM_CONSOLE_LOGLEVEL_3 bool "3: ERR" help Error conditions. config MAXIMUM_CONSOLE_LOGLEVEL_2 bool "2: CRIT" help Critical conditions. config MAXIMUM_CONSOLE_LOGLEVEL_1 bool "1: ALERT" help Action must be taken immediately. config MAXIMUM_CONSOLE_LOGLEVEL_0 bool "0: EMERG" help System is unusable. endchoice config MAXIMUM_CONSOLE_LOGLEVEL int default 0 if MAXIMUM_CONSOLE_LOGLEVEL_0 default 1 if MAXIMUM_CONSOLE_LOGLEVEL_1 default 2 if MAXIMUM_CONSOLE_LOGLEVEL_2 default 3 if MAXIMUM_CONSOLE_LOGLEVEL_3 default 4 if MAXIMUM_CONSOLE_LOGLEVEL_4 default 5 if MAXIMUM_CONSOLE_LOGLEVEL_5 default 6 if MAXIMUM_CONSOLE_LOGLEVEL_6 default 7 if MAXIMUM_CONSOLE_LOGLEVEL_7 default 8 if MAXIMUM_CONSOLE_LOGLEVEL_8 help Map the log level config names to an integer. choice prompt "Default console log level" default DEFAULT_CONSOLE_LOGLEVEL_8 config DEFAULT_CONSOLE_LOGLEVEL_8 bool "8: SPEW" depends on (MAXIMUM_CONSOLE_LOGLEVEL_8) help Way too many details. config DEFAULT_CONSOLE_LOGLEVEL_7 bool "7: DEBUG" depends on (MAXIMUM_CONSOLE_LOGLEVEL_8 || MAXIMUM_CONSOLE_LOGLEVEL_7) help Debug-level messages. config DEFAULT_CONSOLE_LOGLEVEL_6 bool "6: INFO" depends on (MAXIMUM_CONSOLE_LOGLEVEL_8 || MAXIMUM_CONSOLE_LOGLEVEL_7 ||\ MAXIMUM_CONSOLE_LOGLEVEL_6) help Informational messages. config DEFAULT_CONSOLE_LOGLEVEL_5 bool "5: NOTICE" depends on (MAXIMUM_CONSOLE_LOGLEVEL_8 || MAXIMUM_CONSOLE_LOGLEVEL_7 ||\ MAXIMUM_CONSOLE_LOGLEVEL_6 || MAXIMUM_CONSOLE_LOGLEVEL_5) help Normal but significant conditions. config DEFAULT_CONSOLE_LOGLEVEL_4 bool "4: WARNING" depends on (MAXIMUM_CONSOLE_LOGLEVEL_8 || MAXIMUM_CONSOLE_LOGLEVEL_7 ||\ MAXIMUM_CONSOLE_LOGLEVEL_6 || MAXIMUM_CONSOLE_LOGLEVEL_5 ||\ MAXIMUM_CONSOLE_LOGLEVEL_4) help Warning conditions. config DEFAULT_CONSOLE_LOGLEVEL_3 bool "3: ERR" depends on (MAXIMUM_CONSOLE_LOGLEVEL_8 || MAXIMUM_CONSOLE_LOGLEVEL_7 ||\ MAXIMUM_CONSOLE_LOGLEVEL_6 || MAXIMUM_CONSOLE_LOGLEVEL_5 ||\ MAXIMUM_CONSOLE_LOGLEVEL_4 || MAXIMUM_CONSOLE_LOGLEVEL_3) help Error conditions. config DEFAULT_CONSOLE_LOGLEVEL_2 bool "2: CRIT" depends on (MAXIMUM_CONSOLE_LOGLEVEL_8 || MAXIMUM_CONSOLE_LOGLEVEL_7 ||\ MAXIMUM_CONSOLE_LOGLEVEL_6 || MAXIMUM_CONSOLE_LOGLEVEL_5 ||\ MAXIMUM_CONSOLE_LOGLEVEL_4 || MAXIMUM_CONSOLE_LOGLEVEL_3 ||\ MAXIMUM_CONSOLE_LOGLEVEL_2) help Critical conditions. config DEFAULT_CONSOLE_LOGLEVEL_1 bool "1: ALERT" depends on (MAXIMUM_CONSOLE_LOGLEVEL_8 || MAXIMUM_CONSOLE_LOGLEVEL_7 ||\ MAXIMUM_CONSOLE_LOGLEVEL_6 || MAXIMUM_CONSOLE_LOGLEVEL_5 ||\ MAXIMUM_CONSOLE_LOGLEVEL_4 || MAXIMUM_CONSOLE_LOGLEVEL_3 ||\ MAXIMUM_CONSOLE_LOGLEVEL_2 || MAXIMUM_CONSOLE_LOGLEVEL_1) help Action must be taken immediately. config DEFAULT_CONSOLE_LOGLEVEL_0 bool "0: EMERG" help System is unusable. endchoice config DEFAULT_CONSOLE_LOGLEVEL int default 0 if DEFAULT_CONSOLE_LOGLEVEL_0 default 1 if DEFAULT_CONSOLE_LOGLEVEL_1 default 2 if DEFAULT_CONSOLE_LOGLEVEL_2 default 3 if DEFAULT_CONSOLE_LOGLEVEL_3 default 4 if DEFAULT_CONSOLE_LOGLEVEL_4 default 5 if DEFAULT_CONSOLE_LOGLEVEL_5 default 6 if DEFAULT_CONSOLE_LOGLEVEL_6 default 7 if DEFAULT_CONSOLE_LOGLEVEL_7 default 8 if DEFAULT_CONSOLE_LOGLEVEL_8 help Map the log level config names to an integer. config CONSOLE_BTEXT bool default n config CONSOLE_SROM bool default n config CONSOLE_LOGBUF bool default n config NO_POST bool "Don't show any POST codes" default n config SERIAL_POST bool "Show POST codes on the serial port console" depends on CONSOLE_SERIAL8250 && !NO_POST default n help If enabled, coreboot will additionally print POST codes (which are usually displayed using a so-called "POST card" ISA/PCI/PCI-E device) on the serial console. endmenu